不同施氮处理下旱作农田土壤CH_4、N_2O气体排放特征研究

依托甘肃农业大学布设在定西市李家堡镇的长期施氮定位实验,对不同施氮农田CH4和N2O气体通量,采用静态箱-气相色谱法进行小麦生育期的连续观测,并对影响通量变化的环境因子同期观测.结果表明:5个施氮处理下(0、52.5、105、157.5、210 kg·hm-2),旱作农田土壤在小麦全生育期内表现为CH4累积通量的汇和N2O累积通量的源;且不施氮处理时,CH4累积吸收通量最大;施氮量为210 kg·hm-2时,土壤CH4的累积吸收通量所受抑制最大,即土壤CH4累积吸收通量随施氮量升高而降低.相反,不施氮处理时,土壤N2O的累积排放通量最小,施氮量为210 kg·hm-2时,土壤N2O的累积排放通量最大,土壤N2O累积排放通量随施氮量的增加而增大.综合分析,施氮量增大会抑制全生育期旱作春小麦田土壤CH4吸收通量,提高土壤N2O的排放通量.因此,合理控制施氮量有利于生育期旱作农田土壤减排.CH4平均吸收通量随土壤温度的升高而降低,随土壤水分的升高而升高;相反,N2O平均排放通量随土壤温度的升高而升高,随土壤水分的升高而降低.5~10 cm层次的土壤温度与CH4平均吸收通量呈极显著线性负相关,与N2O平均排放通量呈显著正相关.5~10 cm层次的土壤水分与CH4平均吸收通量呈极显著线性正相关,与N2O平均排放通量呈显著负相关.     

爆炸物冲击波的人体防护研究

针对爆炸物爆炸冲击波、破片或子弹冲击、高温高压气体热辐射等复杂环境下的人体伤害威胁,本文从人员损伤研究和防护材料研究两方面综述了国内外研究进展,最后为开展人体有效防护研究工作提出了几点建议.     

石化企业事故应急预案中的安全防护距离探讨

对石化企业在事故应急预案中安全防护距离的确定给出了各种可以参考的计算方法及参考数据,为企业在事故应急中合理确定安全防护距离提供了决策参考。     

Mechanism of the intermittent motion of two-phase debris flows

A typical two-phase debris flow exhibits a high and steep flow head consisting of rolling boulders and cobbles with intermittent or fluctuating velocity. The relative motion between the solid phase and the liquid phase is obvious. The motion of a two-phase debris flow depends not only on the rheological properties of the flow, but also on the energy transmission between the solid and liquid phases. Several models have been developed to study two-phase debris flows. An essential shortcoming of most of these models is the omission of the interaction between the two phases and identification of the different roles of the different materials in two-phase debris flows. The tracer particles were used for the velocity of solid phase and the velocity of liquid phase was calculated by the water velocity on the surface of the debris flow in the experiments. This paper analyzed the intermittent feature of two-phase debris flows based on videos of debris flows in the field and flume experiments. The experiments showed that the height of the head of the two-phase debris flow increased gradually in the initiation stage and reached equilibrium at a certain distance from the start of the debris flow. The height growth and the velocity of the flow head showed fluctuating characteristics. Model equations were established and the analyses proved that the average velocity of the two-phase debris flow head was proportional to the flood discharge and inversely proportional to the volume of the debris flow head.     

A comparison of statistical methods for deriving freshwater quality criteria for the protection of aquatic organisms

Species sensitivity distributions (SSDs) are increasingly used in both ecological risk assessment and derivation of water quality criteria. However, there has been debate about the choice of an appropriate approach for derivation of water quality criteria based on SSDs because the various methods can generate different values. The objective of this study was to compare the differences among various methods. Data sets of acute toxicities of 12 substances to aquatic organisms, representing a range of classes with different modes of action, were studied. Nine typical statistical approaches, including parametric and nonparametric methods, were used to construct SSDs for 12 chemicals. Water quality criteria, expressed as hazardous concentration for 5 % of species (HC₅), were derived by use of several approaches. All approaches produced comparable results, and the data generated by the different approaches were significantly correlated. Variability among estimates of HC₅ of all inclusive species decreased with increasing sample size, and variability was similar among the statistical methods applied. Of the statistical methods selected, the bootstrap method represented the best-fitting model for all chemicals, while log-triangle and Weibull were the best models among the parametric methods evaluated. The bootstrap method was the primary choice to derive water quality criteria when data points are sufficient (more than 20). If the available data are few, all other methods should be constructed, and that which best describes the distribution of the data was selected.     

应用被动扩散管监测分析葫芦岛市环境空气NO2时空分布特征

被动扩散技术以其低成本、操作简单、空间覆盖率较高等优点已在西方国家广泛应用于环境空气质量监测与调查，辽宁省环保局通过欧盟项目引进，本技术在葫芦岛市环境空气质量监测应用有4年时间。依据4年环境空气被动扩散管监测基础数据，分析了解葫芦岛市城区大气中NO2时空分布特征：高浓度值出现在交通区，季节上呈现春季明显低于其它季节。     

介质材料在可渗透反应墙中的应用进展

可渗透反应墙正发展成为修复污染地下水技术的新方向,其中介质材料是可渗透反应墙成功修复污染地下水的关键。可渗透反应墙介质材料可以细分为还原型、吸附型、沉淀型和降解型介质材料等四类,并分别从不同类型的介质材料的反应机理、应用情况以及存在的问题等方面加以阐述。可渗透反应墙介质材料的选择应在其反应机理的基础上,结合实际的地下水环境条件、污染源、人类活动和经济费用等加以综合考虑,以保证可渗透反应墙长期有效经济安全地运行。     

Source attributions of heavy metals in rice plant along highway in Eastern China

Air and soil pollution from traffic has been considered as a critical issue to crop production and food safety, however, few efforts have been paid on distinguish the source origin of traffic-related contaminants in rice plant along highway. Therefore, we investigated metals (Pb, Cd, Cr, Zn and Cu) concentrations and stable Pb isotope ratios in rice plants exposed and unexposed to highway traffic pollution in Eastern China in 2008. Significant differences in metals concentrations between the exposed and unexposed plants existed in leaf for Pb, Cd and Zn, in stem only for Zn, and in grain for Pb and Cd. About 46% of Pb and 41% of Cd in the grain were attributed to the foliar uptake from atmosphere, and there were no obvious contribution of atmosphere to the accumulations of Cr, Zn and Cu in grain. Except for Zn, all of the heavy metals in stem were attributed to the root uptake from soil, although significant accumulations of Pb and Cd from atmosphere existed in leaf. This indicated that different processes existed in the subsequent translocation of foliar-absorbed heavy metals between rice organs. The distinct separation of stable Pb isotope ratios among rice grain, leaf, stem, soil and vehicle exhaust further provided evidences on the different pathways of heavy metal accumulation in rice plant. These results suggested that further more attentions should be paid to the atmospheric deposition of heavy metals from traffic emission when plan crop layout for food safety along highway.     

建立能够体现化工行业特点的行业排放标准初探

化工行业具有传统的工业类型和新兴产业交叉渗透的特点。现有的污染物排放标准因涵盖行业过多、细化内容不够、可操作性不强、行业特点不突出,故不太适应化工行业的发展,建立新的化工行业污染物排放标准势在必行。文章概要介绍了我国现有污染物排放标准,分析了美国、欧盟、日本、德国等一些国家和组织的排放标准,提议建立能够体现化工行业特点的行业排放标准,以达到淘汰落后工艺和促进清洁工艺的目的。     

石墨探针收集/石墨探针炉原子吸收法直接测定APM中痕量铅

研究一种直接收集并测定大气微粒物质中痕量有害元素铅的新方法,石墨探针直接收集ＡＰＭ后,用石墨探针炉原子吸收法直接测定收集在探针上的ＡＰＭ中痕量铅。方法特征量为４４．００ｐｇ,检出限为４８．３６ｐｇ,,相对标准偏差为３．２２％,铅学度与峰面积吸光度在０－２５０μｇ／Ｌ范围内呈线性关系,测定标准参比材料,其回收率为９４．４２％＿９９．１４％,并成功地测定了大气微粒物质中痕量铅的含量。