Analytical study of Asthart crude oil asphaltenes biodegradation

Various analyses of an asphaltenic fraction of Asthart crude oil enabled us to show that it was partially degraded by a marine mixed bacterial population with saturated hydrocarbons as cosubstrate. We also gave evidence of its strong biotransformation rate and tried to correlate its evolution with the nature of the produced fractions.     

Degradation of crude oil by a mixed population of bacteria isolated from sea-surface foams

A mixed bacteria population (EM₄) was isolated from foams formed on the surface of a zone chromically polluted by hydrocarbons (Gulf of Fos, French Mediterranean coast, October 1981). The population was able to degrade crude oil very effectively in the presence of sea water supplemented with nitrogen, phosphorus and iron. The percentage of hydrocarbon degradation was 81% at 30°C, pH 8, and partial oxygen pressure of 100%. After 12 d incubation, 92 and 83% of satured and aromatic compounds (mono-, di- and triaromatics) were degraded, respectively, as well as 63% of polar products and 48.5% of asphaltenes. Maximum degradation was attained at a sodium chloride concentration of between 400 and 800 mM with Population EM₄, which is constituted of 8 strains, four of which are weak halophiles. Bacterial growth on hydrocarbons induces the production in the culture medium of surface-active agents which are able to emulsify the substrate. There is high specificity between the nature of the growth substrate and such emulsifying activity, particularly as far as petroleum is concerned: only the culture medium from Population EM₄ is able to emulsify petroleum. These surface-active agents contain sugars and lipids (fatty acids, mono- and diglycerides). The foams, which always contain a high concentration of both hydrocarbons (100 to 180 mgl^-1) and bacteria that are able to grow on these types of substrates, have a strong emulsifying activity. Our results would seem to demonstrate the importance of biosurfactants in the elimination of hydrocarbons from polluted biotopes.     

Spatio-temporal dissolved oxygen dynamics in the Orbetello lagoon by fuzzy pattern recognition

This paper models the dissolved oxygen (DO) dynamics in the Orbetello lagoon as a function of the physico-chemical and ecological system variables, including the submerged vegetation, nutrients, and hydrodynamics. It should be viewed as the concluding sequel to a previous paper describing the dynamics of the lagoon ecosystem [Giusti, E., Marsili-Libelli, S., 2006. An integrated model for the Orbetello lagoon ecosystem, Ecol. Model. 196, 379–394] by introducing the missing DO dynamics. The model considers the oxygen demand originating from the decay of carbonaceous and nitrogenous compounds, as well as photosynthesis and natural reaeration by winds and currents as the oxygen producing processes. With a fixed-parameter set the model could accurately reproduce each single circadian DO cycle, but in the long run it failed to extend this fit and could not accommodate the large DO fluctuations induced by the seasonal variability. In order to enhance the model flexibility, a fuzzy pattern recognition algorithm was designed to classify the circadian DO patterns into four typical behaviours, related to the season, and estimate the corresponding parameters, with the overall model output being a fuzzy combination of these sets. The paper discusses several methods to patch the parameter sets and compares their performance in tracking long-term DO variations. A final assessment of the model validity is obtained by incorporating the whole DO dynamics (model, fuzzy pattern recognition and parameter combination) into the general lagoon model and producing a consistently correct series of DO daily distributions over a yearly cycle. Thus the paper contains both a practical and a methodological aspect. The practical one is the linking of all the lagoon dynamics to the dissolved oxygen kinetics in order to clarify to what extent macroalgae and macrophytes influence the oxygen balance. The methodological aspect consists of extending the validity of short-term models to long time-horizons through a patching technique supported by fuzzy pattern recognition.     

Early detection and evaluation of waste through sensorized containers for a collection monitoring application

The present study describes a novel application for use in the monitoring of municipal solid waste, based on distributed sensor technology and geographical information systems. Original field testing and evaluation of the application were carried out in Pudong, Shanghai (PR China).The local waste management system in Pudong features particular requirements related to the rapidly increasing rate of waste production. In view of the fact that collected waste is currently deployed to landfills or to incineration plants within the context investigated, the key aspects to be taken into account in waste collection procedures include monitoring of the overall amount of waste produced, quantitative measurement of the waste present at each collection point and identification of classes of material present in the collected waste. The case study described herein focuses particularly on the above mentioned aspects, proposing the implementation of a network of sensorized waste containers linked to a data management system.Containers used were equipped with a set of sensors mounted onto standard waste bins. The design, implementation and validation procedures applied are subsequently described. The main aim to be achieved by data collection and evaluation was to provide for feasibility analysis of the final device. Data pertaining to the content of waste containers, sampled and processed by means of devices validated on two purpose-designed prototypes, were therefore uploaded to a central monitoring server using GPRS connection. The data monitoring and management modules are integrated into an existing application used by local municipal authorities.A field test campaign was performed in the Pudong area. The system was evaluated in terms of real data flow from the network nodes (containers) as well as in terms of optimization functions, such as collection vehicle routing and scheduling. The most important outcomes obtained were related to calculations of waste weight and volume. The latter data were subsequently used as parameters for the routing optimization of collection trucks and material density evaluation.     

A review of waste management practices and their impact on human health

This work reviews (i) the most recent information on waste arisings and waste disposal options in the world, in the European Union (EU), in Organisation for Economic Co-operation and Development (OEDC) countries, and in some developing countries (notably China) and (ii) the potential direct and indirect impact of waste management activities on health. Though the main focus is primarily on municipal solid waste (MSW), exposure to bioaerosols from composting facilities and to pathogens from sewage treatment plants are considered. The reported effects of radioactive waste are also briefly reviewed. Hundreds of epidemiological studies reported on the incidence of a wide range of possible illnesses on employees of waste facilities and on the resident population. The main conclusion of the overall assessment of the literature is that the evidence of adverse health outcomes for the general population living near landfill sites, incinerators, composting facilities and nuclear installations is usually insufficient and inconclusive. There is convincing evidence of a high risk of gastrointestinal problems associated with pathogens originating at sewage treatment plants. In order to improve the quality and usefulness of epidemiological studies applied to populations residing in areas where waste management facilities are located or planned, preference should be given to prospective cohort studies of sufficient statistical power, with access to direct human exposure measurements, and supported by data on health effect biomarkers and susceptibility biomarkers.     

Evidence for declining levels of heavy-metals in the Severn Estuary and Bristol Channel, U.K. and their spatial distribution in sediments

Levels of heavy-metals (Cd, Cu, Cr, Ni, Pb and Zn) in suspended particulate and in surface and subsurface sediments were determined at seven locations in the Severn Estuary and Bristol Channel. Sediment metal concentrations were highest at sites close to industrial centres but levels have decreased significantly over the last 30 years so that they are now close to, or meet, environmental quality guidelines. The greatest metal concentrations in deposited sediments were usually associated with the finest particulates at locations with muddy sediments, but this was not always true at sites with predominantly sandy sediments. The metals bound to suspended particulates at all sites were remarkably consistent, presumably reflecting the mixing capacity of this macro-tidal estuary. The re-exposure of older, more contaminated sediments could explain the observed differences between deposited and suspended material. Sediment redistribution due to strong seasonal currents might also explain the differences between winter and summer samples.     

Municipal solid waste management in Pudong New Area, China

The increase in population, the rapid economic growth and the rise in community living standards accelerate municipal solid waste (MSW) generation in developing cities. This problem is especially serious in Pudong New Area, Shanghai, China. The daily amount of MSW generated in Pudong was about 1.11 kg per person in 2006. According to the current population growth trend, the solid waste quantity generated will continue to increase with the city's development. In this paper, we describe a waste generation and composition analysis and provide a comprehensive review of municipal solid waste management (MSWM) in Pudong. Some of the important aspects of waste management, such as the current status of waste collection, transport and disposal in Pudong, will be illustrated. Also, the current situation will be evaluated, and its problems will be identified.     

Monitoring of polychlorinated biphenyl contamination and estrogenic activity in water, commercial feed and farmed seafood

We evaluated the concentration and congener distribution of seven "target" polychlorinated biphenyls (PCBs) present in water collected in different aquaculture farms of the Mediterranean area, commercial feeds, and farmed seafood. PCBs were present in feed and in tissues of all the analysed organisms at levels ranging from 1.96 ng g(-1) to 124.00 ng g(-1) wet weight, and in 10.5% of the water samples, at levels from under detection limit to 33.0 ng l(-1) with total PCB concentrations significantly higher in samples from the Tyrrhenian Sea than the Adriatic Sea. PCB congener distribution in tissues resembled that of feed, suggesting that commercial feed is an important source of PCBs. The estrogenicity of organic extracts of the samples was also evaluated by using an in vitro yeast reporter assay. Estrogenic activity higher than 10% of the activity induced by 10 nM 17 beta-estradiol was observed in 20.0% of seafood samples and 15.8% of water samples. Seafood and water samples from the Tyrrhenian Sea were more frequently estrogenic than the Adriatic ones (16.45 versus 4.08%). A significant correlation of total PCB concentrations on biological activity was observed for sea bass and mussels from the Adriatic Sea (p < 0.045 and p < 0.04, respectively), and for sea bass of the Tyrrhenian Sea (p = 0.05). These results indicate the need of an integral approach in the exposure assessment to potential toxic compounds for human via food.     

Assessment of the relative toxicity of Cu2+ by measuring structural changes of supercoiled DNA

A method for the measurement of the relative toxicity of Cu2+ in aquatic environments is proposed. It is based on the quantitative measurement on the shape change of the supercoiled DNA after it is contacted with different levels of Cu2+ for various time intervals. In the absence of any redox reagents, all supercoiled DNA degraded into other forms of DNA after 24h incubation in the presence of 5.13 x 10(-3), 5.08 x 10(-4) and 5.35 x 10(-5)mol/L Cu2+. At a lower Cu2+ concentration (10(-6)mol/L), 44% of supercoiled DNA retained its original supercoiled form after 24 h, and 29% after 48 h. The concentration of RC50, i.e. concentration of pollutants at which 50% of the supercoiled DNA was relaxed compared to control samples, can be obtained from the does-response curves at different exposure time, which may provide a rapid and convenient approach to assess the relative toxicity of environmental pollutants.     

Heavy metal contamination of brown seaweed and sediments from the UK coastline between the Wear river and the Tees river

The concentration of Fe, Mn, Zn, Cu, Pb, Ni, Cr, Cd, and Ag were determined in the brown alga Fucus vesiculosus and intertidal surface sediments from coastal locations of northeast England. Levels of heavy metals similar to those of polluted areas of the British coastline were detected. There is evidence of contamination (especially with Zn and Pb) in sediments from sites affected by colliery spoil and from the Wear estuary. The pelitic fraction ( < 63 microm) is usually more enriched in heavy metals, but it represents a very small percentage of the bulk samples. The fine-grained sand is a very important repository of contaminants especially where particles of colliery spoil, secondary mineral, and amorphous phases are present. Aqua regia-extracted Zn, Cu, and Pb in sediments are significantly correlated with those in seaweed. Despite the closure of all base metal and coal mines, and the cessation of many industrial activities in the region, sediments and brown algae are contaminated with heavy metals. The control site (Holy Island) and the Tees estuary appear to be the least affected.