The effect of catch crops on sulphate leaching and availability of S in the succeeding crop on sandy loam soil in Denmark

Sulphate leaching losses may reduce the long-term possibility of maintaining the S supply of crops in low input farming systems. The ability of catch crops (Italian ryegrass (Lolium multiflorum Lam), winter rape (Brassica napus L.) and fodder radish (Raphanus sativus L.)) to reduce soil sulphate concentrations in autumn and make it available to a succeeding crop was investigated in 1996–1998 on sandy loam soil in Denmark. All catch crops reduced soil sulphate concentrations in the autumn compared to bare soil. Especially, the cruciferous catch crops had the ability to deplete efficiently soil sulphate levels and thus, reduce the sulphate leaching potential. The S uptake in aboveground catch crop was 8, 22 and 36 kg S per ha for ryegrass, winter rape and fodder radish, respectively. In the following spring, sulphate levels of the autumn bare soil were low in the top 0.5 m and a peak of sulphate was found at 0.75–1 m depth. In contrast, where a fodder radish catch crop had been grown, high sulphate levels were present in the top 0.5 m, but only small amounts of sulphate were found at 0.5–1.5 m depth. In spring barley (Hordeum vulgare L.), that followed catch crops, S concentrations at heading and maturity revealed that the availability of soil S increased following winter rape and fodder radish, whereas there were indications that following ryegrass, the S availability was reduced compared to bare soil. This initial study showed that catch crops have a high potential for reducing sulphate leaching and may be used to synchronise S availability with plant demand in a crop rotation.     

Community-based Environmental Planning: Operational Dilemmas,Planning Principles and Possible Remedies

The operational dilemmas and challenges associated with the practice of community-based environmental planning (CBEP) are examined. The paper examines the frequently invoked ‘bottom-up’ versus ‘top-down’ dichotomy and argues that environmental governance is more complex, dynamic and multi-scalar than this simple dichotomy implies. The paper identifies six key problems with the CBEP approach: (i) the conceptualization of ‘community’ which poorly accounts for difference; (ii) problems of inequality; (iii) the organizational capacity and efficacy of community groups; (iv) the scale of CBEP; (v) the types of knowledge utilized by communities in environmental management; and (vi) the potential for parochial concerns to dominate the priorities and agenda of community organizations. The paper analyses each of these issues, identifies planning principles that may aid resolution, and suggests possible remedies.     

How to reconcile environmental and economic performance to improve corporate sustainability: corporate environmental strategies in the European paper industry

This paper discusses the relationship between environmental and economic performance and the influence of corporate strategies with regard to sustainability and the environment. After formulating a theoretical model, results are reported from an empirical analysis of the European paper manufacturing industry. New data are used to test hypotheses derived from the theoretical model, using environmental performance indices representing different corporate environmental strategy orientations. In particular, an emissions-based index largely reflecting end-of-pipe strategies and an inputs-based index reflecting integrated pollution prevention are distinguished. For the emissions-based index, a predominantly negative relationship between environmental and economic performance is found, whereas for the inputs-based index no significant link is found. This is consistent with the theoretical model, which predicts the possibility of different relationships. The results also show that for firms with pollution prevention-oriented corporate environmental strategies, the relationship between environmental and economic performance is more positive, thus making improvements in corporate sustainability more likely. Based on this last insight, managerial implications of this are discussed with regard to strategy choices, investment decisions and operations management.     

Characterization and pyrolysis of Chlorella vulgaris and Arthrospira platensis: potential of bio-oil and chemical production by Py-GC/MS analysis

Environmental Science and Pollution Research - Biofuels have been seen as potential sources to meet future energy demand as a renewable and sustainable energy source. Despite the fact that the...     

Treatment of a clinical analysis laboratory wastewater from a hospital by photo-Fenton process at four radiation settings and toxicity response

Environmental Science and Pollution Research - The photo-Fenton process was performed with four radiation settings to treat clinical analysis laboratory wastewater (CALWW) from a hospital, with the...     

Application of ICP-QMS for the determination of plutonium in environmental samples for safeguards purposes

Aiming to determine the plutonium amount as well as its isotopic composition, in particular, in swipe samples for safeguards purposes, an analytical method was developed with a plutonium separation step based on extraction chromatography using 2 cm TEVA columns and detection with quadrupole ICP-MS applying an ultra-sonic nebulizer coupled with membrane desolvation system. The method was successfully applied to New Brunswick plutonium certified reference materials as well as to Lawrence Livermore National Laboratory round robin samples, based on the round robin samples provided by the Institute for Reference Materials and Measurements (Belgium), as part of the Regular European Interlaboratory Measurement Evaluation Programme (REIMEP), campaign 16 (isotopic abundances of plutonium in plutonium nitrate samples), with a total plutonium amount between 1 and 0.25 ng per sample. After the introduction of an additional separation step, it was also possible to carry out precise and accurate total plutonium, (240)Pu/(239)Pu, (241)Pu/(239)Pu and (242)Pu/(239)Pu atom ratios determination in sediment sample showing its applicability to environmental samples in general, reaching a detection limit equivalent to 5 mBq(239)Pu kg(-1).     

Flexible and robust strategies for waste management in Sweden

Treatment of solid waste continues to be on the political agenda. Waste disposal issues are often viewed from an environmental perspective, but economic and social aspects also need to be considered when deciding on waste strategies and policy instruments. The aim of this paper is to suggest flexible and robust strategies for waste management in Sweden, and to discuss different policy instruments. Emphasis is on environmental aspects, but social and economic aspects are also considered. The results show that most waste treatment methods have a role to play in a robust and flexible integrated waste management system, and that the waste hierarchy is valid as a rule of thumb from an environmental perspective. A review of social aspects shows that there is a general willingness among people to source separate wastes. A package of policy instruments can include landfill tax, an incineration tax which is differentiated with respect to the content of fossil fuels and a weight based incineration tax, as well as support to the use of biogas and recycled materials.     

Levels and risk assessment of chemical contaminants in byproducts for animal feed in Denmark

With aim to provide information on chemical contaminants in byproducts in animal feed, the data from an official control by the Danish Plant Directorate during 1998–2009, were reviewed and several samples of citrus pulp and dried distillers grains with solubles (DDGS) were additionally collected for analysis and risk assessment. The levels of contaminants in the samples from the official control were below maximum limits from EU regulations with only a few exceptions in the following groups; dioxins and dioxin-like polychlorobiphenyls (PCBs) in fish-containing byproducts and dioxins in vegetable and animal fat, hydrogen cyanide in linseed, and cadmium in sunflowers. The levels of pesticides and mycotoxins in the additionally collected samples were below maximum limits. Enniatin B (ENN B) was present in all DDGS samples. The hypothetical cases of carry-over of contamination from these byproducts were designed assuming total absorption and accumulation of the ingested contaminant in meat and milk and high exposure (a byproduct formed 15–20% of the feed ration depending on the species). The risk assessment was refined based on literature data on metabolism in relevant animal species. Risk assessment of contaminants in byproducts is generally based on a worst-case approach, as data on carry-over of a contaminant are sparse. This may lead to erroneous estimation of health hazards. The presence of ENN B in all samples of DDGS indicates that potential impact of this emerging mycotoxin on feed and food safety deserves attention. A challenge for the future is to fill up gaps in toxicological databases and improve models for carry-over of contaminants.