Modelling Tracer Dispersion from Landfills

Several wind tunnel experiments of tracer dispersion from reduced-scale landfill models are presented in this paper. Different experimental set-ups, hot-wire anemometry, particle image velocimetry and tracer concentration measurements were used for the characterisation of flow and dispersion phenomena nearby the models. The main aim of these experiments is to build an extensive experimental data set useful for model validation purposes. To demonstrate the potentiality of the experimental data set, a validation exercise on several mathematical models was performed by means of a statistical technique. The experiments highlighted an increase in pollutant ground level concentrations immediately downwind from the landfill because of induced turbulence and mean flow deflection. This phenomenon turns out to be predominant for the dispersion process. Tests with a different set-up showed an important dependence of the dispersion phenomena from the landfill height and highlighted how complex orographic conditions downwind of the landfill do not affect significantly the dispersion behaviour. Validation exercises were useful for model calibration, improving code reliability, as well as evaluating performances. The Van Ulden model proved to give the most encouraging results.     

Impact of a NO₂-regenerated diesel particulate filter on PAH and NPAH emissions from an EURO IV heavy duty engine

In this study the emissions of polycyclic aromatic hydrocarbons (PAH) and their nitro-derivates (NPAH) from a modern heavy duty engine were analysed. Focus was on the effects of the aftertreatment system. It consisted of an oxidation catalyst coupled to a diesel particulate filter (DPF). In such systems the process of PAH and NPAH degradation may compete with the NPAH formation. Scope of the study was to explain to which extent modern DPF could support the formation of highly mutagenic NPAH by nitration of pre-existing PAH. It was found that the diesel trap reduced the total amount of PAH and NPAH emitted both at low load and high load. Nevertheless, at low load the lower temperatures and the higher NO(2) concentration furnished better conditions for PAH nitration while they were more adverse to NPAH degradation. These effects were NPAH-specific. For these reasons, some NPAH like 3-nitrophenanthrene were still efficiently degraded but others were newly formed. For instance emissions of the highly toxic 1-benzo(a)pyrene and 6-nitrobenzo(a)pyrene where increased by a factor 15 at low load and, even if in lower amount, were formed also at high load. The super-mutagen 1,6-dinitropyrene, which was not present in raw exhaust, could be found only after the DPF, indicating a new formation. In regard to emissions from the active regeneration mode, tremendous high emissions of 1-nitropyrene were reported. More accurate investigation of such a regeneration mode would be of great interest for the future.     

Design,Modelling and Assessment of Emission Scenarios Resulting from a Network of Wood Biomass Boilers

The use of wood biomass as a fuel for domestic and industrial heating systems allows for a reduction of CO₂ emissions at a global scale, but it may also result in worse local air quality conditions, due to their emissions of particulate matter. The aim of this study is to assess the actual trend of atmospheric pollution in a study area, assuming that all heating systems are replaced by small size biomass boilers linked to the buildings through district heating network. Ground level concentrations of particulate matter, emitted by different heating systems, are therefore evaluated through numerical simulations performed by means of an atmospheric dispersion model (Sirane). As a first step, we have compared the environmental impact of a woodchip boilers network with that given by the use of traditional heating systems, i.e. wood stoves and natural gas boilers. As a second step, we have analysed the impact of such a network taking into account different emission scenarios, related to different boilers operating conditions. Results show that the environmental performances of a woodchip boilers network can be optimized by combining it with other renewable sources of energy devoted to the supply of hot water. The adopted analysis methodology can be applied to other real or hypothetic punctual sources on the territory.     

Nitro-PAH formation studied by interacting artificially PAH-coated soot aerosol with NO2 in the temperature range of 295–523 K

Diesel particulate matter poses a threat to human health, and in particular nitrated polycyclic aromatic hydrocarbons (NPAHs) found within and on the surface of these particles. Although diesel particulate filters (DPFs) have been designed and implemented to reduce these and other harmful diesel emissions, the particle loaded filters may act as a reaction chamber for the enhanced production of NPAHs from the nitration of PAHs with NO₂.Focus is on the investigation of the heterogeneous reactions that occur on soot particles by exposing laboratory produced pyrene- or benzo(a)pyrene-coated spark discharge soot particles to varying concentrations of NO₂ and temperatures while following the formation of products over time. The sole nitration product that was observed throughout the experiments with pyrene-coated soot was 1-nitropyrene (1-NPYR), which increased linearly with reaction time for all NO₂ concentrations chosen (0.11, 1.0, 2.0, 4.0 ppm, m m^?1). Resulting 1-NPYR formation rate increased exponentially with [NO₂]. Throughout the 3-h experiments less than 10% of pyrene has been converted to 1-NPYR and the partial reaction order with regard to [NO₂] was estimated to 1.52. Benzo(a)pyrene (BaP) was more reactive than pyrene. After 3 h reaction time almost 80% of the BaP has been converted to 6-NBaP.Highest 1-NPYR concentrations on particles were detected at 373 K, and at higher temperatures a considerable decrease in particulate 1-NPYR was observed. A similar trend was observed in a DPF simulation system (PM-Kat^®-like) with BaP-coated soot. In this case, highest 6-NBaP concentration on particles was detected at 423 K. Backed by corroborating results from separate gas/solid-phase partition experiments with 1-NPYR and 6-NBaP, it is likely that the newly formed 1-NPYR and 6-NBaP became transferred from particle to gas phase at higher temperatures. Results from this study confirm the presence of 1-NPYR and 6-NBaP in particulate and gas phase under conditions encountered in DPFs, especially when operated at low temperature situations of the aftertreatment system.     

Development and field validation of an indicator to assess the relative mobility and risk of pesticides in the Lourens River catchment,South Africa

A GIS based pesticide risk indicator that integrates exposure variables (i.e. pesticide application, geographic, physicochemical and crop data) and toxicity endpoints (using species sensitivity distributions) was developed to estimate the Predicted Relative Exposure (PREX) and Predicted Relative Risk (PRRI) of applied pesticides to aquatic ecosystem health in the Lourens River catchment, Western Cape, South Africa. Samples were collected weekly at five sites from the beginning of the spraying season (October) till the beginning of the rainy season (April) and were semi quantitatively analysed for relevant pesticides applied according to the local farmers spraying programme. Monitoring data indicate that physicochemical data obtained from international databases are reliable indicators of pesticide behaviour in the Western Cape of South Africa. Sensitivity analysis identified K_OC as the most important parameter influencing predictions of pesticide loading derived from runoff. A comparison to monitoring data showed that the PREX successfully identified hotspot sites, gave a reasonable estimation of the relative contamination potential of different pesticides at a site and identified important routes of exposure (i.e. runoff or spray drift) of different pesticides at different sites. All pesticides detected during a monitored runoff event, were indicated as being more associated with runoff than spray drift by the PREX. The PRRI identified azinphos-methyl and chlorpyrifos as high risk pesticides towards the aquatic ecosystem. These results contribute to providing increased confidence in the use of risk indicator applications and, in particular, could lead to improved utilisation of limited resources for monitoring and management in resource constrained countries.     

The structure of turbulence near a tall forest edge: the backward-facing step flow analogy revisited

Flow disturbances near tall forest edges are receiving significant attention in diverse disciplines including ecology, forest management, meteorology, and fluid mechanics. Current theories suggest that near a forest edge, when the flow originates from a forest into a large clearing, the flow retains its forest canopy turbulence structure at the exit point. Here, we propose that this framework is not sufficiently general for dense forested edges and suggest that the flow shares several attributes with backward-facing step (BFS) flow. Similar analogies, such as rotor-like circulations, have been proposed by a number of investigators, though the consequences of such circulations on the primary terms in the mean momentum balance at the forest clearing edge have rarely been studied in the field. Using an array of three triaxial sonic anemometers positioned to measure horizontal and vertical gradients of the velocity statistics near a forest edge, we show that the flow structure is more consistent with an intermittent recirculation pattern, rather than a continuous rotor, whose genesis resembles the BFS flow. We also show that the lateral velocity variance, v'2, is the moment that adjusts most slowly with downwind distance as the flow exits from the forest into the clearing. Surprisingly, the longitudinal and vertical velocity variances (u'2 and w'2) at the forest edge were comparable in magnitude to their respective values at the center of a large grass-covered forest clearing, suggesting rapid adjustment at the edge. Discussions on how the forest edge modifies the spectra and co-spectra of momentum fluxes, effective mixing length, and static pressure are also presented.     

Development and pre-validation of a testosterone enzyme immunoassay (EIA) for predicting the sex ratio of immature loggerhead sea turtles (Caretta caretta) recovered along the western coast of the central Adriatic Sea

Plasma testosterone levels were evaluated, by validating and using a commercially available testosterone enzyme immunoassay (EIA) as an indicator of the sex of immature loggerhead turtles (Caretta caretta) recovered along the western coast of the central Adriatic Sea between November 2011 and February 2012. Testosterone levels were measured in blood samples collected from 28 immature turtles kept in short-term maintenance at the Fondazione Cetacea Rescue Centre (Italy). Overall, plasma testosterone ranged between 229.3 and 2628.6 pg ml^?1, suggesting that the EIA procedure is effective for determining androgen titers in immature loggerhead sea turtles. Analysis of the obtained data indicates an unbiased sex ratio supporting previous studies of juvenile loggerhead turtle sex ratios in the Mediterranean Sea. The present work can be considered a starting point for augmenting knowledge on the dynamics of juvenile loggerhead aggregations increasingly found in the northern-central Adriatic Sea and for promoting local management for conservation actions.     

Estimation of PCDD/F distribution and fluxes in the Venice Lagoon,Italy: combining measurement and modelling approaches

The available experimental information on the occurrence of PCDD/Fs in the Venice Lagoon, Italy, was compiled and used to calculate fugacities for the environmental compartments of sediment, suspended particulate matter (SPM), water and air and then used to estimate fugacity ratios and assess the likely net direction of flux between media. The bottom sediment: SPM fugacity ratios for different PCDD/Fs indicate conditions close to equilibrium, suggestive of the close coupling of SPM with re-suspended sediment. Sediment/water and the sediment/air fugacity ratios suggest that net flux directions vary depending on the congener and the location within the lagoon. Net sediment-water-air movement (i.e. re-mobilisation/volatilisation) is suggested for the lighter congeners from the industrial canals, where the highest PCDD/F concentrations in the lagoon occur. The tendency to volatilise increases with decreasing congener molecular weight. In contrast, net deposition (air-water-sediment) appears to be occurring for the heaviest (hepta- and octa-) substituted PCDD/Fs. OCDF represents a marker of the industrial district of the lagoon, decreasing in concentration and as a fraction of total PCDD/Fs with increasing distance. The fugacity-based quantitative water air sediment interaction (QWASI) mass-balance model was applied to the central part of the lagoon. The key parameters for the determination of the model output, identified by a sensitivity analysis, were: the sediment active depth, the sediment re-suspension and deposition rates, and the total input of PCDD/Fs to the system. The QWASI model also indicates the tendency for the lighter PCDD/Fs to be released from surface sediment to the water column.     

Reconstruction of historical trends of PCDD/Fs and PCBs in the Venice Lagoon, Italy

Historical trends of PCDD/Fs and PCBs from the year 1900 have been reconstructed for the Venice Lagoon area by using a fugacity-based dynamic multimedia model. A novel approach to estimate the inputs to the system was applied. Emissions to the lagoon were estimated by studying dated sediment cores taken from salt marshes located in the lagoon area. These cores have recently proven to be a suitable tool to reconstruct the temporal trends of atmospheric deposition of POPs. According to the model, concentrations of PCBs and PCDD/Fs in air and water reflect the trends of their production and usage, peaking during the 1960s. The peaks in the sediment were delayed by 5-40 years depending on the congener. Predicted concentrations are in good agreement with experimental results. The most important input parameters, identified by a sensitivity analysis, are the degradation constants, K(ow), the Henry's law constant, vapour pressure, active sediment depth, sediment resuspension, and deposition rates, and water residence time in the lagoon.     

One trait, many signals: different information on male quality is enclosed within the same trait in a blenny fish

Colourful ornaments are traditionally evaluated as one trait. However, they could consist of several components, such as total size, colour intensity and extension, each possibly bearing its own message about one aspect of quality. Males of the blenny Salaria pavo exhibit a colourful head crest and solely care for eggs. During the breeding season, the head crest shows a yellow colouration, the intensity and relative extension of which are independent of crest size. Here, we show that: (1) carotenoids are responsible for the head crest yellow patch; (2) activating the immune system by injecting the bacterial antigen lipopolysaccharides affects both the intensity and extent of the yellow colouration; and (3) females assess males on the basis of colour patch expression. However, the response of the yellow patch to the immune challenge was dependent on head crest size. Indeed, males with a larger head crest reacted better to the simulated infection, sustaining a level of yellow patch close to pre-challenge size.