Effectiveness of EMS in Tunisian companies: framework and implementation process based on ISO 14001 standard

This paper reports environmental analysis results of food and tannery Tunisian companies to identify the features of environmental management system (EMS) that is implemented recently. EMS via ISO 14001 has become one of the principal tools used by companies to handle environmental aspects and impacts through their various complex activities interacted with environment. While several companies have implemented and maintained a formal EMS, it has related mainly to their benefits in short term without responding to the sustainable development recommendations and practices. This study focuses on the strong linkage between the EMS effectiveness of food–tannery Tunisian companies and sustainability. A proactive environmental management approach is proposed and adopts a qualitative and quantitative assessment for factor analysis. It provides a strategic EMS framework and principles for sustainability to evolve the future enterprises’ benefits that has a clear influence on environmental performance in long term.     

Disposal of obsolete pesticides,the case of Ethiopia

Ethiopia has accumulated obsolete pesticide stocks since pesticides were first imported in the 1960s due to prolonged storage of pesticides, inappropriate storage conditions because of poor storage facilities, the lack of trained staff and lack of national legislation for pesticide registration and monitoring system of pesticide use in the country. The first pesticide inventory conducted in 1995 led by FAO in collaboration with the government of Ethiopia had identified about 426 tonnes of obsolete pesticides mainly on state-owned agricultural farms and held by the Ministry of Health. However, these stocks have increased to over 1500 tonnes (including 200 active ingredients) as found in a detailed inventory conducted in 1999. The stocks included organochlorines (258.3 tonnes), organophosphates (155.4 tonnes), carbamates (58.5 tonnes), coumarines (14.9 tonnes), inorganics (30.2 tonnes), others (257.2 tonnes), mixed pesticides (70.4 tonnes) and unknown pesticides (307.1 tonnes) including both liquid and solid state formulations. The obsolete organochlorine pesticides stocks were mostly pesticides such as chlordane, DDT, dieldrin and lindane that are banned or restricted in most countries. The highest amount of a single active ingredient found was the organophosphate insecticide pirimiphos methyl (172.1 tonnes). All these stocks were disposed of in the first phase of disposal in Finland (during 2000–2003) by the hazardous waste management company Ekokem at a cost of about US$ 4.44 million. Another 1000 tonnes of obsolete pesticides have been identified and are currently being eliminated in a second disposal phase at a total cost of US$ 8 135 500. Along with the disposal process, a number of activities are being implemented to prevent future pesticides accumulation. These activities include the development and enforcement of pesticide policy, the implementation of Integrated Pest Management (IPM) and Integrated Vector Management (IVM), capacity building in terms of providing professional trainings, creating awareness among stakeholders on the environmental and human health hazard posed by obsolete pesticides as well as other actions to prevent their accumulation and enforcement of national legislations and policies related to pesticides use. However, pesticide use in the country is increasing. For instance, 12 years of pesticides import data (1996–2007) by the Ministry of Agriculture shows that 2973 tonnes of pesticides were imported between 1996–1998, 3670 tonnes between 1999–2001, 5079 tonnes between 2002–2004 and 8302 tonnes between 2005–2007. Moreover, 6 years of insecticide import data (1996/97–2001/02) by the Ministry of Health shows that around 919 tonnes of insecticides were imported between 1996/97–1997/98, 812 tonnes between 1998/99–1999/00 and 970 tonnes between 2000/01–2001/02 for malaria and other vector borne diseases control.     

The fate of prazosin and levonorgestrel after electrochemical degradation process: Monitoring by-products using LC-TOF/MS

Prazosin (PRZ) and levonorgestrel (LNG) are widely used as an anti-disease drugs due to their biological activity in the human body. The frequent detection of these compounds in water samples requires alternative technologies for the removal of both compounds. After electrochemical degradation of PRZ and LNG, the parent compounds could be completely removed after treatment, but the identification and characterization of by-products are necessary as well. In this study, the effects of NaCl concentration and applied voltage were investigated during the electrochemical degradation process. The results revealed that the increase of NaCl concentration and applied voltage could promote the generation of hypochlorite OCl? and then enhance the degradation of PRZ and LNG. After initial study, 6 V and 0.2 g NaCl were selected for further experiments (96% and 99% removal of PRZ and LNG after 40 min, respectively). Energy consumption was also evaluated and calculated for PRZ and LNG at 3, 6 and 8 V. Solid phase extraction (SPE) method plays an important role in enhancing the detection limit of by-products. Furthermore, characterization and identification of chlorinated and non-chlorinated by-products were conducted using an accurate liquid chromatography-time of flight/mass spectrometry LC-TOF/MS instrument. The monitoring of products during the electrochemical degradation process was performed at 6 V and 0.2 g NaCl in a 50 mL solution. The results indicated that two chlorinated products were formed during the electrochemical process. The toxicity of by-products toward E. coli bacteria was investigated at 37°C and 20 hr incubation time.     

TiO2–PANI/Cork composite: A new floating photocatalyst for the treatment of organic pollutants under sunlight irradiation

A novel photocatalyst based on TiO_2–PANI composite supported on small pieces of cork has been reported. It was prepared by simple impregnation method of the polyaniline(PANI)–modified TiO_2 on cork. The TiO_2–PANI/Cork catalyst shows the unique feature of floating on the water surface. The as-synthesized catalyst was characterized by X-ray diffraction(XRD),scanning electron micrograph(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), Fourier transform infrared spectroscopy(FT-IR), UV–vis diffuse reflectance spectra(UV–vis DRS) and the Brunauer–Emmett–Teller(BET) surface area analysis. Characterization suggested the formation of anatase highly dispersed on the cork surface. The prepared floating photocatalyst showed high efficiency for the degradation of methyl orange dye and other organic pollutants under solar irradiation and constrained conditions, i.e., no-stirring and no-oxygenation. The TiO_2–PANI/Cork floating photocatalyst can be reused for at least four consecutive times without significant decrease of the degradation efficiency.     

Effects of Water Availability and Habitat Quality on Bark-Stripping Behavior in Barbary Macaques

Abstract: The cedar oak forest of the Middle Atlas in Morocco is not only the last of the large forests in the southern Mediterranean, but it also contains all the surviving forest biodiversity. This forest has been severely affected by drought, overgrazing by mixed herds of goat and sheep, and excessive logging for timber, firewood, and livestock fodder. Recently, cedar bark stripping by Barbary Macaques (    Macaca sylvanus ) has begun to have an effect on the forest. We investigated this behavior by monitoring a 500-km² mosaic forest of cedar and oak in the Middle Atlas of Morocco between 1994 and 1996. We surveyed the forest 18 times in four different seasons along a 90-km transect. We recorded observations of bark stripping and a variety of quantitative ecological factors that could predict this behavior, such as livestock density, forest quality, undergrowth condition, water availability, and monkey density. The statistical analysis (including rank correlation, regression, and nonparametric variance analysis) strongly suggests that water scarcity and monkey exclusion from previously available permanent water sources are correlated with intense cedar bark-stripping behavior by macaques. The density of cedars and of monkeys appeared to be only secondary factors. As a conservation policy, making water more accessible to wild monkeys might reduce bark-stripping behavior.     

Materials,fuels, upgrading,economy, and life cycle assessment of the pyrolysis of algal and lignocellulosic biomass: a review

Climate change issues are calling for advanced methods to produce materials and fuels in a carbon–neutral and circular way. For instance, biomass pyrolysis has been intensely investigated during the last years. Here we review the pyrolysis of algal and lignocellulosic biomass with focus on pyrolysis products and mechanisms, oil upgrading, combining pyrolysis and anaerobic digestion, economy, and life cycle assessment. Products include oil, gas, and biochar. Upgrading techniques comprise hot vapor filtration, solvent addition, emulsification, esterification and transesterification, hydrotreatment, steam reforming, and the use of supercritical fluids. We examined the economic viability in terms of profitability, internal rate of return, return on investment, carbon removal service, product pricing, and net present value. We also reviewed 20 recent studies of life cycle assessment. We found that the pyrolysis method highly influenced product yield, ranging from 9.07 to 40.59% for oil, from 10.1 to 41.25% for biochar, and from 11.93 to 28.16% for syngas. Feedstock type, pyrolytic temperature, heating rate, and reaction retention time were the main factors controlling the distribution of pyrolysis products. Pyrolysis mechanisms include bond breaking, cracking, polymerization and re-polymerization, and fragmentation. Biochar from residual forestry could sequester 2.74 tons of carbon dioxide equivalent per ton biochar when applied to the soil and has thus the potential to remove 0.2–2.75 gigatons of atmospheric carbon dioxide annually. The generation of biochar and bio-oil from the pyrolysis process is estimated to be economically feasible.

     

Leaching behaviour of hazardous demolition waste

Demolition wastes are generally disposed of in unlined landfills for inert waste. However, demolition wastes are not just inert wastes. Indeed, a small fraction of demolition waste contains components that are hazardous to human health and the environment, e.g., lead-based paint, mercury-contained in fluorescent lamps, treated wood, and asbestos. The objective of this study is to evaluate the release potential of pollutants contained in these hazardous components when they are mixed with inert wastes in unlined landfills. After identification of the different building products which can contain hazardous elements and which can be potentially pollutant in landfill scenario, we performed leaching tests using three different lysimeters: one lysimeter containing only inert wastes and two lysimeters containing inert wastes mixed with hazardous demolition wastes. The leachates from these lysimeters were analysed (heavy metals, chlorides, sulphates fluoride, DOC (Dissolved Organic Carbon), phenol index, and PAH). Finally, we compared concentrations and cumulative releases of elements in leachates with the limits values of European regulation for the acceptance of inert wastes at landfill. Results indicate that limit values are exceeded for some elements. We also performed a percolation column test with only demolition hazardous wastes to evaluate the specific contribution of these wastes in the observed releases.     

Behaviour of Rice-Byproducts and Optimizing the Conditions for Production of High Performance Natural Fiber Polymer Composites

This present study deals with evaluating some available rice by-products, such as rice straw and rice husks, as a fiber component in manufacturing of high performance natural fiber polymer composites (NFPC). The utilization of these undesirable wastes will contribute to the reduction of the environmental impact of waste disposal by burning. Two matrices (thermoset and thermoplastic) were used. Optimization of manufacture conditions of polyester-based thermosetting polymer composites was carried out through examine the effects of fibers to polymer ratio, amounts of catalyzed and initiator, fraction size of fibers and substituting one fibers by another, as well as time, temperature and pressure of pressing. The possibility of styrene containing polyester solution on improving the fiber interface via in situ grafting and enhancing the strength and water resistance of the produced NFPC was also evaluated, in comparison with that produced from using thermoplastic matrix (polypropylene) in presence of coupling agent. The production of this valuable product (NFPC) by this simple procedure, which not needs special devices (twin extrusion with heater), and chemicals to improve the compatibility between fibers and polymer matrix, will ensure reasonable profits and direct impacts on the Egyptian economy in general and rice growers in particular.     

Hydration characteristics of coconut fibre-reinforced mortars containing CSA and Portland cement

Journal of Material Cycles and Waste Management - This study aims at investigation of the effects of incorporating natural fibres and two types of cement [ordinary Portland cement and calcium...