Trophic strategies of garfish, Arrhamphus sclerolepis, in natural coastal wetlands and artificial urban waterways

We used carbon stable isotope and stomach content analyses to test whether snub-nosed garfish, Arrhamphus sclerolepis (Hemiramphidae), in the extensive artificial urban waterways of southeast Queensland, Australia, rely on autotrophic sources different to those in natural wetlands. Carbon isotope values of A. sclerolepis were similar to those in previous investigations, with enriched values in natural habitat (mean = −13.9‰, SE=0.6) and depleted values (−19.1‰, 0.1) in artificial habitat. A. sclerolepis in natural habitat consumed large amounts of seagrass during the day and night, and at night also ingested small quantities of crustacean prey. In artificial habitat, A. sclerolepis consumed macroalgae during the night and switched to invertebrates (terrestrial ants) in the day. Values of δ¹⁵ N in all the fish were 3–8‰ more enriched than sources. Mathematical modelling of feasible source mixtures showed that in natural habitat the bulk of the dietary carbon is obtained from seagrass, but the nitrogen is obtained from animal prey. In artificial habitat, carbon is obtained from a mixture of macroalgae and animals. We could not determine the nitrogen sources in artificial habitat of A. sclerolepis since, even after accounting for trophic fractionation of δ¹⁵ N, the values were outside the range of potential sources. If the types of animals ingested vary over time, perhaps one or more types of animal important in the provision of nitrogen was not sampled during the study. This study demonstrates that not only does A. sclerolepis occur in both artificial and natural habitats, but it uses the same strategy of bulk herbivory with the inclusion of smaller amounts of animal prey. This understanding of how ecological processes support fisheries production in artificial habitat improves the overall understanding of the effects of urbanisation on coastal food webs.     

Predicting biodiversity change: outside the climate envelope, beyond the species-area curve

Efforts to anticipate threats to biodiversity take the form of species richness predictions (SRPs) based on simple correlations with current climate and habitat area. We review the major approaches that have been used for SRP, species-area curves and climate envelopes, and suggest that alternative research efforts may provide more understanding and guidance for management. Extinction prediction suffers from a number of limitations related to data and the novelty of future environments. We suggest additional attention to (1) identification of variables related to biodiversity that are diagnostic and potentially more predictable than extinction, (2) constraints on species dispersal and reproduction that will determine population persistence and range shifts, including limited sources or potential immigrants for many regions, and (3) changes in biotic interactions and phenology. We suggest combinations of observational and experimental approaches within a framework available for ingesting heterogeneous data sources. Together, these recommendations amount to a shift in emphasis from prediction of extinction numbers to identification of vulnerabilities and leading indicators of change, as well as suggestions for surveillance tools needed to evaluate important variables and the experiments likely to provide most insight.     

Using environmental heterogeneity to plan for sea‐level rise

Environmental heterogeneity is increasingly being used to select conservation areas that will provide for future biodiversity under a variety of climate scenarios. This approach, termed conserving nature's stage (CNS), assumes environmental features respond to climate change more slowly than biological communities, but will CNS be effective if the stage were to change as rapidly as the climate? We tested the effectiveness of using CNS to select sites in salt marshes for conservation in coastal Georgia (U.S.A.), where environmental features will change rapidly as sea level rises. We calculated species diversity based on distributions of 7 bird species with a variety of niches in Georgia salt marshes. Environmental heterogeneity was assessed across six landscape gradients (e.g., elevation, salinity, and patch area). We used 2 approaches to select sites with high environmental heterogeneity: site complementarity (environmental diversity [ED]) and local environmental heterogeneity (environmental richness [ER]). Sites selected based on ER predicted present‐day species diversity better than randomly selected sites (up to an 8.1% improvement), were resilient to areal loss from SLR (1.0% average areal loss by 2050 compared with 0.9% loss of randomly selected sites), and provided habitat to a threatened species (0.63 average occupancy compared with 0.6 average occupancy of randomly selected sites). Sites selected based on ED predicted species diversity no better or worse than random and were not resilient to SLR (2.9% average areal loss by 2050). Despite the discrepancy between the 2 approaches, CNS is a viable strategy for conservation site selection in salt marshes because the ER approach was successful. It has potential for application in other coastal areas where SLR will affect environmental features, but its performance may depend on the magnitude of geological changes caused by SLR. Our results indicate that conservation planners that had heretofore excluded low‐lying coasts from CNS planning could include coastal ecosystems in regional conservation strategies.     

Mineral licks: motivational factors for visitation and accompanying disease risk at communal use sites of elk and deer

Free-ranging cervids acquire most of their essential minerals through forage consumption, though occasionally seek other sources to account for seasonal mineral deficiencies. Mineral sources occur as natural geological deposits (i.e., licks) or as anthropogenic mineral supplements. In both scenarios, these sources commonly serve as focal sites for visitation. We monitored 11 licks in Rocky Mountain National Park, north-central Colorado, using trail cameras to quantify daily visitation indices (DVI) and soil consumption indices (SCI) for Rocky Mountain elk (Cervus elaphus) and mule deer (Odocoileus hemionus) during summer 2006 and documented elk, mule deer, and moose (Alces alces) visiting licks. Additionally, soil samples were collected, and mineral concentrations were compared to discern levels that explain rates of visitation. Relationships between response variables; DVI and SCI, and explanatory variables; elevation class, moisture class, period of study, and concentrations of minerals were examined. We found that DVI and SCI were greatest at two wet, low-elevation licks exhibiting relatively high concentrations of manganese and sodium. Because cervids are known to seek Na from soils, we suggest our observed association of Mn with DVI and SCI was a likely consequence of deer and elk seeking supplemental dietary Na. Additionally, highly utilized licks such as these provide an area of concentrated cervid occupation and interaction, thus increasing risk for environmental transmission of infectious pathogens such as chronic wasting disease, which has been shown to be shed in the saliva, urine, and feces of infected cervids.     

Seed terminal velocity, wind turbulence, and demography drive the spread of an invasive tree in an analytical model

Little is known about the relative importance of mechanistic drivers of plant spread, particularly when long-distance dispersal (LDD) events occur. Most methods to date approach LDD phenomenologically, and all mechanistic models, with one exception, have been implemented through simulation. Furthermore, the few recent mechanistically derived spread models have examined the relative role of different dispersal parameters using simulations, and a formal analytical approach has not yet been implemented. Here we incorporate an analytical mechanistic wind dispersal model (WALD) into a demographic matrix model within an analytical integrodifference equation spread model. We carry out analytical perturbation analysis on the combined model to determine the relative effects of dispersal and demographic traits and wind statistics on the spread of an invasive tree. Models are parameterized using data collected in situ and tested using independent data on historical spread. Predicted spread rates and direction match well the two historical phases of observed spread. Seed terminal velocity has the greatest potential influence on spread rate, and three wind properties (turbulence coefficient, mean horizontal wind speed, and standard deviation of vertical wind speed) are also important. Fecundity has marginal importance for spread rate, but juvenile survival and establishment are consistently important. This coupled empirical/theoretical framework enables prediction of plant spread rate and direction using fundamental dispersal and demographic parameters and identifies the traits and environmental conditions that facilitate spread. The development of an analytical perturbation analysis for a mechanistic spread model will enable multispecies comparative studies to be easily implemented in the future.     

Chemical characterization of contact semiochemicals for host-recognition and host-acceptance by the specialist parasitoid <Emphasis Type="Italic">Cotesia plutellae</Emphasis> (Kurdjumov)

Summary. Cotesia plutellae is a specialist parasitoid of Plutella xylostella. This specificity is potentially under the control of several factors before and after oviposition. Thereby, the stimuli that lead female parasitoids to host locations and to oviposition, might be at the basis of the specificity. We explore here the response of C. plutellae females exposed to host cuticular lipids. A total cuticular lipid extract of host caterpillars was fractionated into a hydrocarbon fraction and a non-hydrocarbon fraction. Neither fraction alone had any effect on oviposition behaviour in C. plutellae but the hydrocarbon fraction alone did seem to have a positive effect on the rate of antennal contact by the females. To induce oviposition behaviour, both fractions were necessary and reflect cooperation between at least one compound in each fraction. Identification of cuticular lipids shows that hydrocarbons were dominant (77%). Non-hydrocarbon compounds were mainly represented by 15-nonacosanone (18% of the total lipid extract). This ketone is rare in insect cuticle lipids and is thought to originate from the cabbage epicuticle where it is dominant with n-C₂₉ and 14- and 15-nonacosanol also found among the cuticular lipids of the host caterpillar.     

Aerobic degradation of di- and trichlorobenzenes by two bacteria isolated from polluted tropical soils

Two polychlorinated biphenyl (PCBs)-degrading bacteria were isolated by traditional enrichment technique from electrical transformer fluid (Askarel)-contaminated soils in Lagos, Nigeria. They were classified and identified as Enterobacter sp. SA-2 and Pseudomonas sp. SA-6 on the basis of 16S rRNA gene analysis, in addition to standard cultural and biochemical techniques. The strains were able to grow extensively on dichloro- and trichlorobenzenes. Although they failed to grow on tetrachlorobenzenes, monochloro- and dichlorobenzoic acids, they were able to utilize all monochlorobiphenyls, and some dichlorobiphenyls as sole sources of carbon and energy. The effect of incubation with axenic cultures on the degradation of 0.9 mM 1,4-dichlorobenzene, 0.44 mM 1,2,3- and 0.43 mM 1,3,5-trichlorobenzene in mineral salts medium was studied. Approximately, 80-90% of these xenobiotics were degraded in 200 h, concomitant with cell increase of up to three orders of magnitude, while generation times ranged significantly (P<0.05) from 17-32 h. Catechol 1,2-dioxygenase and catechol 2,3-dioxygenase activities were detected in crude cell-free extracts of cultures pre-grown with benzoate, with the latter enzyme exhibiting a slightly higher activity (0.15-0.17 micromolmin(-1) mg of protein(-1)) with catechol, suggesting that the meta-cleavage pathway is the most readily available catabolic route in the SA strains. The wider substrate specificity of these tropical isolates may help in assessing natural detoxification processes and in designing bioremediation and bioaugmentation methods.     

3D numerical investigation of thermally assisted high efficiency ductile machining of nanocrystalline hydroxyapatite

This study investigates the effects of four different variables (initial workpiece temperature, side rake angle, edge radius/feed rate, and nose radius/depth of cut) on ductile regime machining of a bioceramic material known as nanohydroxyapatite (nano-HAP) using 3D numerical simulation. AdvantEdge FEM Version 5.9 is used to conduct turning simulations of the nano-HAP workpiece. Tecplot 360 is used to analyze the results of the simulations. Because the workpiece is thin, the entire workpiece is set to a uniform initial temperature to simulate laser preheating of the material. Initial workpiece temperature, rake angle (side rake angle), edge radius, and nose radius are varied, and the effects of these operating conditions on critical feed are investigated. It is found that critical feed increases as initial workpiece temperature increases, and also as negativity of rake angle increases. For the edge radius, it is concluded that an initial increase causes an increase in critical feed – however, at some value of edge radius, critical feed shows no further increase; for the nose radius, critical feed appears to show no significant dependence.     

Gas-phase and semivolatile organic emissions from a modern nonroad diesel engine equipped with advanced aftertreatment

ABSTRACT

U.S. Tier 4 Final and Euro Stage IV and V regulations for nonroad compression-ignition engines have led to the development of exhaust aftertreatment technologies optimized for nonroad engines and duty cycles. In this study, several aftertreatment configurations consisting of state-of-the-art diesel oxidation catalysts (DOCs), diesel particulate filters (DPFs), copper (Cu) zeolite– and vanadium-based selective catalytic reduction (SCR) catalysts, and ammonia oxidation (AMOX) catalysts are evaluated using both nonroad transient (NRTC) and steady (8-mode NRSC) cycles in order to understand both component- and system-level effects of diesel aftertreatment on gas-phase, semivolatile, and particle-phase and particle-bound unregulated organic emissions. Organic emissions reported in this work include total hydrocarbon (THC), n-alkanes, branched alkanes, saturated cycloalkanes, aromatics, aldehydes, ketones, hopanes, steranes, and soluble organic fraction (SOF). Brake-specific emissions are reported for four configurations, including engine-out, DOC+CuZ-SCR+AMOX, V-SCR+AMOX, and DOC+DPF+CuZ-SCR+AMOX, and conversion of engine-out emissions is reported for the three aftertreatment configurations. Mechanisms responsible for the reduction of organic species are discussed in detail. This summary of emissions from a current nonroad diesel engine equipped with advanced aftertreatment can be used to more accurately model the impact of anthropogenic emissions on the atmosphere with tools such as the U.S. Environmental Protection Agency’s Motor Vehicle Emissions Simulator (MOVES2014a) model.

Implications: Anthropogenic emissions are a source of significant human health and environmental risk. This study, focused on the treatment of exhaust emissions from a modern nonroad diesel engine with a variety of aftertreatment configurations, examines the impact that human industrial activity can have on air pollution. In particular, we focus on the remediation of gas-phase and semivolatile organic emissions by emission reduction technologies. This detailed summary of emissions from a current nonroad diesel engine equipped with advanced aftertreatment can be used to more accurately model the impact of anthropogenic emissions on the atmosphere with tools such as the U.S. Environmental Protection Agency’s MOVES2014a model.