Tribute chromite mining and environmental management on the northern Great Dyke of Zimbabwe

A combination of poor mining methods, waste storage and disposal systems, as well as the day-to-day activities associated with tribute and contract chromite mining are primarily responsible for environmental problems on the Zimbabwe Great Dyke. For instance, the unsystematic dumping of waste rocks in rivers blocks channels and results in flooding, which further sterilizes agricultural land and mineral resources. Erosion of these haphazardly located dumps causes siltation of water bodies and results in the dispersion of heavy metals in soils and watercourses. Vegetation growth on waste dumps is limited and constrained by the high pH levels from phytotoxic metals in soils, the lack of nutrients, poor moisture retention qualities of the mining waste and critical cation imbalances within dumps. This article attributes poor environmental management on the Dyke to poverty, a direct result of the nature of tribute agreements and output prices. Prices based on output targets are exploitative and undervalue labour and thus perpetuate poverty. By absolving claim holders from environmental liability, tribute agreements contribute directly to environmental problems. Thus, the incorporation of enforceable dual environmental responsibility requirements in contract mining agreements is needed to overcome this problem. This article recommends that, to break the poverty cycle, the primary cause of environmental mismanagement in the sector, miners need to be empowered through claim ownership and the enhancement of their capacity to negotiate prices with buyers of chrome.     

Destruction of Aspergillus versicolor,Penicillium chrysogenum,Stachybotrys chartarum,and Cladosporium cladosporioides spores using chemical oxidation treatment process

The survival of aqueous suspensions of Penicillium chrysogenum, Stachybotrys chartarum, Aspergillus versicolor, and Cladosporium cladosporioides spores was evaluated using various combinations of hydrogen peroxide and Fe²⁺ as catalyst. Spore concentrations of 10⁶–10⁷ colony forming units per milliliter (CFU/mL) were suspended in water and treated with initial hydrogen peroxide and iron concentrations ranging from 0.05 to 10 percent and 100 to 200 ppm, respectively. After four hours of reaction time, samples were plated on agar plates, and the viable fraction of spores was determined by the number of colonies formed. Hydrogen peroxide concentrations above 50,000 ppm resulted in greater than 6‐log₁₀ reduction of viable spores for both catalyzed and noncatalyzed reactions. Iron had a strong catalytic effect when added to solutions with hydrogen peroxide concentration above 5,000 ppm and resulted in two to three orders of magnitude greater reduction compared to hydrogen peroxide alone. Additional samples taken after 24 hours of reaction time showed that the effect of the addition of 100 and 200 ppm of Fe²⁺ catalyst was mostly kinetic, and noncatalyzed hydrogen peroxide had sporicidal effects similar to catalyzed hydrogen peroxide. This study identified initial reagent concentrations of hydrogen peroxide and Fe²⁺ that accomplish a 6‐log₁₀ reduction of viable mold spores within reaction times of 4 and 24 hours. © 2007 Wiley Periodicals, Inc.     

Drivers for innovation in waste-to-energy technology.

This paper summarizes developments made in the field of waste-to-energy technology between the 1980s and the present. In the USA, many waste-to-energy systems were developed in the 1980s and early 1990s. These plants generated power relatively efficiently (typically 23%) in 60 bar/ 443 degrees C boilers. Unfortunately, the development came to a stop when the US Supreme Court rejected the practice of waste flow control in 1994. Consequently, waste was directed to mega-landfills, associated with very negative environmental impacts. However, given landfill taxes and increased fuel prices, new waste-to-energy projects have recently been developed. Attractive premiums for renewable power production from municipal waste have been introduced in several European countries. This triggered important innovations in the field of improved energy recovery. Examples of modern waste-to-energy plants are Brescia and Amsterdam with net efficiencies of 24 and 30%, respectively. Incineration is traditionally preferred in Japan due to space constraints. New legislation promoted ash melting or gasification to obtain improved ash quality. However, these processes reduce the efficiency in terms of energy, cost and availability. A new oxygen-enriched waste-to-energy system is under development in order to better achieve the required inert ash quality.     

Efficient search procedures for extreme pollutant values

Extreme pollutant values are of great interest in water quality monitoring because of their frequent toxicological significance. The principal barrier to the detection of these values, however, is the cost of extensive and comprehensive monitoring. This paper demonstrates an efficient method to determine the maximum sample measurement from a finite set of sequential samples without explicitly testing them all. It is assumed that the process of sample measurement is distinct from collection and has higher costs. It is further assumed that the measurements have high positive autocorrelation.A methodology is presented based on a common industrial testing procedure referred to as composite sampling—the physical pooling or compositing of a set of sequential samples before measurement. A method known as primary first order compositing (PFOC) was found to be superior to the traditional technique of random sampling, particularly if small composite sizes are utilized.The authors are, respectively, operations research analyst, Vancouver, B. C.; Associate Professor and Chairman, Policy Analysis Division, Faculty of Commerce and Business Administration, University of British Columbia; and Associate Professor, Management Science Division, Faculty of Commerce, U.B.C.     

24 h diffusive sampling of toxic VOCs in air onto Carbopack X solid adsorbent followed by thermal desorption/GC/MS analysis-laboratory studies

Diffusive sampling of a mixture of 42 volatile organic compounds (VOCs) in humidified, purified air onto the solid adsorbent Carbopack X was evaluated under controlled laboratory conditions. The evaluation included variations in sample air temperature, relative humidity and ozone concentration. Linearity of samples with loading was examined both for a constant concentration with time varied up to 24 h and for different concentrations over 24 h. Reverse diffusion and its increase with accumulation of sample were determined for all compounds. Tubes were examined for blank levels, change of blanks with storage time, and variability of blanks. Method detection limits were determined based on seven replicate samples. Based on this evaluation, 27 VOCs were selected for quantitative monitoring in the concentration range from approximately 0.1 to 4 ppbv. Comparison results of active and diffusive samples taken over 24 h and under the same simulated ambient conditions at a constant 2 ppbv were interpreted to estimate the effective diffusive sampling rates (ml min(-1)) and their uncertainties and to calculate the corresponding diffusive uptake rates (ng ppmv(-1) min(-1)).     

Scale,context, and decision making in agricultural adaptation to climate variability and change

This work presents a framework for viewing agricultural adaptation, emphasizing the multiple spatial and temporal scales on which individuals and institutions process information on changes in their environment. The framework is offered as a means to gain perspective on the role of climate variability and change in agricultural adaptation, and developed for a case study of Australian agriculture. To study adaptation issues at the scale of individual farms we developed a simple modelling framework. The model highlights the decision making element of adaptation in light of uncertainty, and underscores the importance of decision information related to climate variability. Model results show that the assumption of perfect information for farmers systematically overpredicts adaptive performance. The results also suggest that farmers who make tactical planting decisions on the basis of historical climate information are outperformed by those who use even moderately successful seasonal forecast information. Analysis at continental scales highlights the prominent role of the decline in economic operating conditions on Australian agriculture. Examples from segments of the agricultural industry in Australia are given to illustrate the importance of appropriate scale attribution in adapting to environmental changes. In particular, adaptations oriented toward short time scale changes in the farming environment (droughts, market fluctuations) can be limited in their efficacy by constraints imposed by broad changes in the soil/water base and economic environment occuring over longer time scales. The case study also makes the point that adaptation must be defined in reference to some goal, which is ultimately a social and political exercise. Overall, this study highlights the importance of allowing more complexity (limited information, risk aversion, cross-scale interactions, mis-attribution of cause and effect, background context, identification of goals) in representing adaptation processes in climate change studies.     

In vitro characteristics of human fetal cells obtained from chorionic villus sampling and amniocentesis

In vitro characteristics of human fetal cells have been investigated after chorionic villus sampling at the first trimester and amniocentesis at the second trimester of pregnancy. Light microscopy revealed heterogeneous morphology of cell types in both the chorionic villus culture and the amniotic fluid cultures. Based on the experiments performed, chorionic villus cells are more sensitive to pronase, trypsin, and versene during subculture and have a higher DNA content per single cell and release more [¹²⁵I]-Beta-human chorionic gonadotropin into culture medium than those found in amniotic fluid cells. The practical applications of this study are discussed.