Benefits of applying X-ray computed tomography in bentonite based material research focussed on geological disposal of radioactive waste

Environmental Science and Pollution Research - Bentonite-based geomaterials are included in the designs of geological repository planning in most countries, especially in high-level radioactive...     

Urban Geochemistry: A Multimedia and Multielement Survey of a Small Town in Northern Europe

The concentrations and distributions of chemical elements (Ag, Al, As, Au, Ba, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, Hg, K, La, Mg, Mn, Mo, Na, Ni, P, Pb, S, Sb, Sc, Se, Sr, Te, Th, Ti, Tl, U, V, W and Zn) were studied in till, humus and urban soil in Jakobstad, a small town (20,000 inhabitants) in W. Finland. The analyses were performed with ICP-MS after aqua regia leaching of till (n = 37), urban topsoil (n = 32) and subsoil (n = 32), and HNO3 leaching of humus (n = 37). The till and humus samples, collected at the same sites, were divided into urban and rural samples. The urban till was not significantly enriched in metals. In contrast, a majority of the elements occurred in higher concentrations in the urban than the rural humus samples. Statistical and spatial interpretations of the humus data revealed that traffic (Pb, V and Ni), metal industry (Pb, Zn, Bi, Sb and Cr), an abandoned shooting range (Pb and Sb) and other sources contribute to higher metal levels in the urban humus. The urban soil samples were collected at parks, yards, abandoned industrial sites, roadsides, etc. The topsoil samples were enriched in most elements, also by elements not enriched in the urban humus (e.g. Cd). At several sites, the concentrations far exceeded the limit concentrations for contaminated soils in Finland. A large variety of sources were identified or indicated.     

Chlorophenols in lake bottom sediments: A retrospective study of drinking water contamination

Lake and brook bottom sediments were analyzed for chlorophenols to provide historical data of exposure assessment, after the water intake plant of a Finnish village had been found to be contaminated in 1987, and subsequently elevated non-Hodgkin lymphoma risk was detected. Highly elevated 2,3,4,6-tetrachlorophenol and pentachlorophenol levels were found in all four lake sediment cores investigated. The distribution was uneven with much higher concentrations in the estuary, in contrast to PCB compounds which were more evenly distributed within the basin. The inlet origin of the chlorophenols in the sediments was further supported by the regional distribution pattern of these compounds in the sediment and water along transects of the inlet and its tributaries. The composition of chlorophenol congeners in the sediments was similar to that in a commercial fungicide used by a local sawmill, but different from other sediment analyses reported in Finland, also implying a local source. Dating of three cores by Pb-210 and soot ball chronology indicated that the contamination of the watercourse started in the early 1970s at the latest but possibly earlier. This would provide the latency time required for tumour appearance in the 1970s and 1980s.     

Process chemicals – An ever present concern during plant shutdowns

Chemical accidents during process plant shutdowns may have severe consequences. In spite of this, the safety management systems in place in many companies still mainly cover the normal operations and little explicitly addresses the maintenance shutdown and plant start-up phases. A Finnish research project found that the level of safety during shutdowns is more closely related to the skills of key individuals at the plants and less due to the systematic safety management system of the companies. A guidebook on the topic in conjunction with tools to improve the situation were developed during the project in order to help the companies improve their documentation associated with chemical safety during shutdowns.     

Effect of weathering on abundance and release of potentially toxic elements in soils developed on Lower Cambrian black shales, P. R. China

This paper examines the geochemical features of 8 soil profiles developed on metalliferous black shales distributed in the central parts of the South China black shale horizon. The concentrations of 21 trace elements and 8 major elements were determined using ICP-MS and XRF, respectively, and weathering intensity (W) was calculated according to a new technique recently proposed in the literature. The data showed that the black shale soils inherited a heterogeneous geochemical character from their parent materials. A partial least square regression model and EF_bedrock (enrichment factor normalized to underlying bedrock) indicated that W was not a major control in the redistribution of trace metals. Barium, Sn, Cu, V, and U tended to be leached in the upper soil horizons and trapped by Al and Fe oxides, whereas Sb, Cd, and Mo with negative EF values across the whole profiles may have been leached out during the first stage of pedogenesis (mainly weathering of black shale). Compared with the Chinese average soils, the soils were strongly enriched in the potentially toxic metals Mo, Cd, Sb, Sn, U, V, Cu, and Ba, among which the 5 first listed were enriched to the highest degrees. Elevated concentrations of these toxic metals can have a long-term negative effect on human health, in particular, the soils in mining areas dominated by strongly acidic conditions. As a whole, the black shale soils have much in common with acid sulfate soils. Therefore, black shale soils together with acid sulfate soils deserve more attention in the context of metal exposure and human health.     

Comparing the greenhouse gas emissions from three alternative waste combustion concepts

Three alternative condensing mode power and combined heat and power (CHP) waste-to-energy concepts were compared in terms of their impacts on the greenhouse gas (GHG) emissions from a heat and power generation system. The concepts included (i) grate, (ii) bubbling fluidised bed (BFB) and (iii) circulating fluidised bed (CFB) combustion of waste. The BFB and CFB take advantage of advanced combustion technology which enabled them to reach electric efficiency up to 35% and 41% in condensing mode, respectively, whereas 28% (based on the lower heating value) was applied for the grate fired unit. A simple energy system model was applied in calculating the GHG emissions in different scenarios where coal or natural gas was substituted in power generation and mix of fuel oil and natural gas in heat generation by waste combustion. Landfilling and waste transportation were not considered in the model. GHG emissions were reduced significantly in all of the considered scenarios where the waste combustion concepts substituted coal based power generation. With the exception of condensing mode grate incinerator the different waste combustion scenarios resulted approximately in 1 Mton of fossil CO₂-eq. emission reduction per 1 Mton of municipal solid waste (MSW) incinerated. When natural gas based power generation was substituted by electricity from the waste combustion significant GHG emission reductions were not achieved.     

Determinants of parental effort: a behavioural study in the Eurasian kestrel,Falco tinnunculus

We recorded behaviour of kestrels (Falco tinnunculus) in western Finland during the courtship (1988–1992), incubation (1989–1991), early nestling (age of young 1–2 weeks, 1989–1992) and late nestling stages (3–4 weeks, 1989–1991) to examine determinants of their parental effort (PE). In males, PE was estimated as the hunting effort (the proportion of budget time spent in flight-hunting) and in females as the food provisioning rate (number of prey items delivered to the nest per hour). The following predictions derived from the parental investment theory were examined. (1) Parents rearing large clutches and broods should invest more in breeding than do parents rearing small clutches and broods. The hunting effort of parents did not increase with clutch or brood size, but males tending large broods had a higher prey delivery rate than males tending small broods (Figs 1–2). (2) PE of parents should increase in the course of the breeding season. In males, this was true only between the incubation and early nestling phases (Fig. 3). (3) The early pairs should invest more in breeding than late ones. This tended to be true during the early (for males) and late nestling phases (for females) (Fig. 4). (4) There should be a negative correlation between PE of mates within pairs, but no evidence for such adjustment was found (Fig. 5). (5) Females mated with bright-coloured attractive males should show higher PE than females mated with dull-coloured males but our results were inconsistent with this prediction. We conclude that PE decisions of kestrels are mainly based on cost-benefit estimates of residual reproductive value, rather than on current investment indicators, like clutch or brood size. This might be beneficial in environments with highly variable survival prospects of offspring caused by pronounced among-year variation in abundance of the main food (microtine rodents). The results also show that hypotheses explaining variation in PE in the short term are not necessarily valid for long-term PE, e.g. tending clutches or broods, which also reflects the demands of female and young.     

Concentrations and diversity of microbes from four local bioaerosol emission sources in Finland

Microbial particles can readily be released into the air from different types of man-made sources such as waste operations. Microbiological emissions from different biological sources and their dispersion may be an issue of concern for area planning and for nearby residents. This study was designed to determine the concentrations and diversity of microbiological emissions from four different man-made source environments: waste center with composting windrows, sewage treatment plant, farming environment, and cattle manure spreading. Samples of airborne particles were collected onto polyvinyl chloride filters at three distances along the prevailing downwind direction, from each source environment during a period of approximately 1 week. These samples were analyzed for 13 species or assay groups of fungi, bacterial genus Streptomyces, and Gram-positive and -negative bacteria using quantitative polymerase chain reaction (PCR). Samples for determining the concentrations of viable fungi and bacteria were collected from all environments using a six-stage impactor. The results show that there were variations in the microbial diversity between the source environments. Specifically, composting was a major source for the fungal genera Aspergillus and Penicillium, particularly for Aspergillus fumigatus, and for the bacterial genus Streptomyces. Although the microbial concentrations in the sewage treatment plant area were significantly higher than those at 50 or 200 m distance from the plant area, in the farming environment or cattle manure spreading area, no significant difference was observed between different distances from the source. In summary, elevated concentrations of microbes that differ from background can only be detected within a few hundred meters from the source. This finding, reported earlier for culturable bacteria and fungi, could thus be confirmed using molecular methods that cover both culturable and nonculturable microbial material.     

In-car cell phone use and hazards following hands free legislation

OBJECTIVE: A new law took effect in Finland at the beginning of 2003 which prohibits the handheld use of mobile phones while driving a motor vehicle. The purpose of this study was to assess the impact of the law on phone usage and self-reported safety during the first few months and 16 months later to determine whether the initial level of compliance with the law had been sustained. METHODS: Data were collected by Gallup home poll before (spring 2002) and after legislation took effect (spring 2003 and 2004). A representative sample of drivers who owned a cell phone (n = 836 to 966) was interviewed each time. On-road observations were also collected in four cities for 2003 and 2004. RESULTS: Just after the law, 97% of drivers were aware of the new hands free legislation. In sharp contrast to the pre-law rate of 16%, 43% reported not using the phone while driving immediately after the law and 41% one year later. The occasional users especially reduced their use of phones while driving. The law was correlated to reductions in self-reported handheld use of cell phones while driving, from 55.6% pre-law to 15.2% immediately after passage. In spite of this change, however, the hands free legislation did not reduce self-reported involvement of Finnish drivers in phone-related hazards. Handheld usage was still lower in 2004 than pre-law (20.0%), but the 32% increase from 2003 was significant. Observational data collected in Finland in 2003 and 2004 showed an even higher upward trend in handheld use (87% increase, from 3.1% to 5.8%; pre-law data were not available), and matched a similar increase reported by McCartt and Geary (2004) in their observational evaluation of New York's handheld mobile phone law. CONCLUSION: The self-reports indicate that the hands-free law reduced handheld phone use, among occasional users especially, but did not reduce phone-related hazards. The effect of the law on phone use substantially declined within one year.     

Mass,energy and material balances of SRF production process. Part 1: SRF produced from commercial and industrial waste

This paper presents the mass, energy and material balances of a solid recovered fuel (SRF) production process. The SRF is produced from commercial and industrial waste (C&IW) through mechanical treatment (MT). In this work various streams of material produced in SRF production process are analyzed for their proximate and ultimate analysis. Based on this analysis and composition of process streams their mass, energy and material balances are established for SRF production process. Here mass balance describes the overall mass flow of input waste material in the various output streams, whereas material balance describes the mass flow of components of input waste stream (such as paper and cardboard, wood, plastic (soft), plastic (hard), textile and rubber) in the various output streams of SRF production process. A commercial scale experimental campaign was conducted on an MT waste sorting plant to produce SRF from C&IW. All the process streams (input and output) produced in this MT plant were sampled and treated according to the CEN standard methods for SRF: EN 15442, EN 15443. The results from the mass balance of SRF production process showed that of the total input C&IW material to MT waste sorting plant, 62% was recovered in the form of SRF, 4% as ferrous metal, 1% as non-ferrous metal and 21% was sorted out as reject material, 11.6% as fine fraction, and 0.4% as heavy fraction. The energy flow balance in various process streams of this SRF production process showed that of the total input energy content of C&IW to MT plant, 75% energy was recovered in the form of SRF, 20% belonged to the reject material stream and rest 5% belonged with the streams of fine fraction and heavy fraction. In the material balances, mass fractions of plastic (soft), plastic (hard), paper and cardboard and wood recovered in the SRF stream were 88%, 70%, 72% and 60% respectively of their input masses to MT plant. A high mass fraction of plastic (PVC), rubber material and non-combustibles (such as stone/rock and glass particles), was found in the reject material stream.