Role of the floodplain lakes in the methylmercury distribution and exchanges with the Amazon River, Brazil

Seasonal variability of dissolved and particulate methylmercury(F-MeHg, P-MeHg) concentrations was studied in the waters of the Amazon River and its associated Curuai floodplain during hydrological year 2005–2006, to understand the MeHg exchanges between these aquatic systems. In the oxic white water lakes, with neutral pH, high F-MeHg and P-MeHg concentrations were measured during the rising water stage(0.70 ± 0.37 pmol/L, n = 26) and flood peak(14.19 ± 9.32 pmol/g, n = 7) respectively, when the Amazon River water discharge into the lakes was at its maximum. The lowest mean values were reported during the dry season(0.18 ± 0.07 pmol/L F-MeHg, n = 10 and 1.35 ± 1.24 pmol/g P-MeHg, n = 8), when water and suspended sediments were outflowing from the lakes into the River. In these lakes,the MeHg concentrations were associated to the aluminium and organic carbon/nitrogen changes. In the black water lakes, with acidic pH and reducing conditions, elevated MeHg concentrations were recorded(0.58 ± 0.32 pmol/L F-MeHg, n = 16 and 19.82 ± 15.13 pmol/g PMeHg, n = 6), and correlated with the organic carbon and manganese concentrations. Elevated values of MeHg partition coefficient(4.87 Kd 5.08 log(L/kg) indicate that MeHg is mainly transported associated with the particulate phase. The P-MeHg enrichment detected in all lakes suggests autochthonous MeHg inputs from the sediments into the water column. The MeHg mass balance showed that the Curuai floodplain is not the source of P-MeHg for the Amazon River.     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Characterization of food waste and bulking agents for composting

The characterization of food waste (FW) and locally available bulking agents (BA) are a prerequisite to optimizing compost recipes. This study measured the variation in FW characteristics (pH, dry matter (DM), carbon (C), wet bulk density and Total Kjeldahl Nitrogen (TKN)) produced by a restaurant and a community kitchen in downtown Montreal, Canada from May to August 2004. The project also measured the mass of FW produced by another restaurant and a group of 20-48 households, from June to August 2004. Locally available BA (hay, straw, pine wood shavings, cardboard, left over cattle feed and wheat residue pellets) were also characterized to formulate composting recipes based on the FW characteristics observed during a period representative of winter and summer conditions. Residential and restaurant FW characteristics varied significantly over the summer months, although the mass produced remained constant at 0.61 and 0.56 kg capita(-1)day(-1), respectively. In addition, the number of customers served by the restaurant increased by nearly 50% from June to August. The BA with the highest moisture adsorption capacity was found to be the wheat residue pellets, followed by chopped straw. Wheat residue pellets, chopped hay and left over cattle feed all presented a balanced C/N ratio. Wheat residue pellets and wheat straw, chopped hay and cardboard demonstrated neutral pH values. Based on the variable FW characteristics and monthly production rates, the formulation of recipes indicates that compost facilities must be flexible enough to handle seasonal variations of as much as 50% by volume.     

Immersion frying for the thermal drying of sewage sludge: an economic assessment

This paper presents an economic study of a novel thermal fry-drying technology which transforms sewage sludge and recycled cooking oil (RCO) into a solid fuel. The process is shown to have significant potential advantage in terms of capital costs (by factors of several times) and comparable operating costs. Three potential variants of the process have been simulated and costed in terms of both capital and operating requirements for a commercial scale of operation. The differences are in the energy recovery systems, which include a simple condensation of the evaporated water and two different heat pump configurations. Simple condensation provides the simplest process, but the energy efficiency gain of an open heat pump offset this, making it economically somewhat more attractive. In terms of operating costs, current sludge dryers are dominated by maintenance and energy requirements, while for fry-drying these are comparatively small. Fry-drying running costs are dominated by provision of makeup waste oil. Cost reduction could focus on cheaper waste oil, e.g. from grease trap waste.     

Opportunistically collected data from aerial surveys reveal spatio-temporal distribution patterns of marine debris in German waters

Environmental Science and Pollution Research - Marine debris is known for its ubiquitousness and harmful effects on marine life. This study is the first analysis to provide information on the...     

Muskox status,recent variation,and uncertain future

Ambio - Muskoxen (Ovibos moschatus) are an integral component of Arctic biodiversity. Given low genetic diversity, their ability to respond to future and rapid Arctic change is unknown, although...     

Growth of Dehalococcoides spp. and increased abundance of reductive dehalogenase genes in anaerobic PCB-contaminated sediment microcosms

Polychlorinated biphenyls (PCBs) contaminate 19% of US Superfund sites and represent a serious risk to human and environmental health. One promising strategy to remediate PCB-contaminated sediments utilizes organohalide-respiring bacteria (OHRB) that dechlorinate PCBs.

However, functional genes that act as biomarkers for PCB dechlorination processes (i.e., reductive dehalogenase genes) are poorly understood. Here, we developed anaerobic sediment microcosms that harbor an OHRB community dominated by the genus Dehalococcoides. During the 430-day microcosm incubation, Dehalococcoides 16S rRNA sequences increased two orders of magnitude to 10⁷ copies/g of sediment, and at the same time, PCB118 decreased by as much as 70%. In addition, the OHRB community dechlorinated a range of penta- and tetra-chlorinated PCB congeners including PCBs 66, 70?+?74?+?76, 95, 90?+?101, and PCB110 without exogenous electron donor. We quantified candidate reductive dehalogenase (RDase) genes over a 430-day incubation period and found rd14, a reductive dehalogenase that belongs to Dehalococcoides mccartyi strain CG5, was enriched to 10⁷ copies/g of sediment. At the same time, pcbA5 was enriched to only 10⁵ copies/g of sediment. A survey for additional RDase genes revealed sequences similar to strain CG5’s rd4 and rd8. In addition to demonstrating the PCB dechlorination potential of native microbial communities in contaminated freshwater sediments, our results suggest candidate functional genes with previously unexplored potential could serve as biomarkers of PCB dechlorination processes.

     

Extending the environmental risk assessment for oseltamivir (Tamiflu®) under pandemic use conditions to the coastal marine compartment

In case of an avian-influenza-derived human flu pandemic, an inordinately high use of medicines over several weeks is predicted, in particular for the recommended influenza antiviral oseltamivir (Tamiflu). While the risk of oseltamivir to sewage works and freshwater bodies has already been assessed, the fact that a large percentage of the human population worldwide lives relatively close to the sea raises concern for its environmental compatibility in coastal marine waters. The potential risk of high oseltamivir use to the marine compartment is assessed in this publication, based on the 2003 European Community Technical Guidance Document (TGD) for risk assessment. Subchronic embryo–larval ecotoxicity tests with three marine invertebrates (Pomatoceros triqueter, Annelida; Mytilus edulis, Mollusca; Paracentrotus lividus, Echinodermata) and chronic growth inhibition tests with two different groups of marine microalgae (Isochrysis galbana, Haptophyta; Skeletonema costatum, Heterokontophyta) were performed with the active substance oseltamivir carboxylic acid to derive a dependable marine predicted no-effect concentration (PNEC). This was compared to a predicted environmental concentration (PEC) for oseltamivir in coastal waters, based on the worst-case freshwater PEC. The PEC/PNEC risk characterisation ratio for the marine compartment is well below 1, which in the terminology of the TGD signifies no immediate concern. Further, while oseltamivir may be persistent (P), it is not bioaccumulative (B) nor highly ecotoxic (T) and therefore not a PBT substance. In conclusion, even a high pandemic use of oseltamivir would not lead to a significant risk for the marine compartment, in confirmation of the risk assessment for sewage works and freshwaters.     

Are drivers' comparative risk judgments about speeding realistic?

Introduction

This study focused on comparative judgments about speeding risks among young drivers who have a high risk of being involved in a traffic accident.

Method

We examined (a) how these drivers assess their risk of sanctions and their risk of causing an automobile crash because of speeding in comparison to the estimated risks of other drivers, and (b) how realistic their comparative risk judgments are. We measured the relationship between the drivers' comparative risk judgments, self-reported speeding, and driving-related sensation-seeking. We hypothesized that (a) they would think they have less risk of sanctions and of causing a car accident than others, and (b) their comparative judgments of speeding risks would be linked to self-reported speeding and driving-related sensation-seeking. The study was based on a computerized questionnaire survey conducted with 3,002 young drivers (mean age = 22.3) administered by professional investigators.

Results

The results confirmed our hypotheses.

Impact on Industry

In order to improve the effectiveness of prevention measures and to evaluate the effect of them, road-safety interventions should take into account comparative risk judgments about the targeted risk behavior.