Roof-level large- and small-scale coherent structures in a street canyon flow

Environmental Fluid Mechanics - The characteristics of large- and small-scale turbulent motions at roof-level in a street canyon flow were experimentally investigated along with their...     

Spatial Variability and Source-Receptor Relations at a Street Intersection

A wind tunnel study of dispersion at a simple urban intersection comprising two perpendicular streets is described. Concentration and flow field measurement were undertaken to determine the importance of the exchange of pollutants between the streets and to investigate source-receptor relationships at the intersection. The results showed that only in a symmetrical situation were exchanges negligible and that small departures from symmetry, brought about in the experiments through an off-set in the street alignment or a change of orientation relative to the wind, were sufficient to establish significant exchanges. The results also showed that significant structure appeared in the concentration fields in the streets as a result. Examples are shown where concentrations on one side of a street are entirely due to emissions from the perpendicular street, whereas on the opposite side concentrations depend on emission upwind in the same street as the receptor. The results imply that exchanges between street systems are likely to be the norm in practice and that the consequences of such exchanges are not confined to the immediate vicinity of the intersection.     

A Wind Tunnel Investigation of the Influence of Solar-Induced Wall-Heating on the Flow Regime within a Simulated Urban Street Canyon

A wind tunnel study has been undertaken to assess theinfluence of solar-induced wall heating on the airflowpattern within a street canyon under low-speed windconditions. This flow is normally dominated by large-scalevortical motion, such that the wind moves downwards at thedownstream wall. In the present work the aim has been toexamine whether the buoyancy forces generated at this wallby solar-induced heating are of sufficient strength tooppose the downward inertial forces and, thereby, changethe canyon flow pattern. Such changes will also influencethe dispersion of pollutants within the street. In theexperiments the windward-facing wall of a canyon has beenuniformly heated to simulate the effect of solar radiation.Four different test cases, representing different degreesof buoyancy (defined by a test Froude number, Fr), havebeen examined using a simple, 2-D, square-section canyonmodel in a wind tunnel. For reference purposes, the neutralcase (no wall heating), has also been studied. The approachflow boundary layer conditions have been well defined, withthe wind normal to the main canyon axis, and measurementshave been taken of canyon wall and air temperatures andprofiles of mean velocities and turbulence intensities.Analysis of the results shows clear differences in the flowpatterns. As Fr decreases from the neutral case there arereductions of up to 50% in the magnitudes of the reverseflow velocities near the ground and in the upward motionnear the upstream wall. A marked transition occurs at Fr 1, where the single dominant vortex, existing at higher Fr values, weakens and moves upwards whilst a lower region of relatively stagnant flow appears. This transition hadpreviously been observed in numerical model predictions butat a Fr at least an order of magnitude higher.     

Co-combustion of agricultural residues with coal in a fluidized bed combustor

Power generation from biomass is an attractive technology that utilizes agricultural residual waste. In order to explain the behavior of biomass-fired fluidized bed incinerator, biomass sources from agricultural residues (rice husk and palm kernel) were co-fired with coal in a 0.15m diameter and 2.3m high fluidized bed combustor. The combustion efficiency and carbon monoxide emissions were studied and compared with those for pure coal combustion. Co-combustion of a mixture of biomass with coal in a fluidized bed combustor designed for coal combustion increased combustion efficiency up to 20% depending upon excess air levels. Observed carbon monoxide levels fluctuated between 200 and 900 ppm with the addition of coal. It is evident from this research that efficient co-firing of biomass with coal can be achieved with minimal modifications to existing coal-fired boilers.     

The Effect of Large-Scale Turbulent Structures on a Simple 2-D Canyon-Type Flow

This paper is concerned with a preliminary experimental investigation of the interaction between large turbulent structures, generated in the wake of a circular cylinder, and the rough-wall turbulent boundary layer separated flow immediately downstream of a simple street canyon type geometry represented by backward-facing step. The motivation for the work was to provide some initial data for the validation of a 3-D k- turbulence model used for the prediction of flows and pollutant dispersion within the urban canopy. The aim has been to assess the extent of the perturbation of a simulated street canyon caused by regular large-scale eddies generated upstream. The research has involved the use of thermal anemometry to determine mean velocity and turbulence characteristics both upstream and downstream of the step, together with the mean reacttachment length for the recirculating flow. The results indicate that the presence of the cylinder in the flow reduces the reattachment length. In addition, the periodic structures generated in the cylinder wake are rapidly mixed with the turbulence in the step shear layer such that no periodicity is detected at the reattachment zone.     

Influence of Geometry on the Mean Flow within Urban Street Canyons – A Comparison of Wind Tunnel Experiments and Numerical Simulations

A comparison between numerical simulations and wind tunnel modelling has been performed to examine the variation with streamwise aspect ratio (width/height, W/H) of the mean flow patterns in a street canyon. For this purpose a two-dimensional (2-D) cavity was subjected to a thick turbulent boundary layer flow perpendicular to its principal axis. Five different test cases, W/H = 0.3, 0.5, 0.7, 1.0 and 2.0, have been studied experimentally with flow measurements taken using pulsed-wire anemometry. The results show that the skimming flow regime, with a large vortex in the canyon, occurred for all the cases investigated. For the cavities with W/H 0.7 a weaker secondary circulation developed beneath the main vortex. The narrower the canyon, the smaller the wind speed close to the cavity ground, giving increasingly poor ventilation qualities. The corresponding numerical results were obtained with the Computational Fluid Dynamics (CFD) code CHENSI that uses the standard k- model. The intercomparison showed good agreement in terms of the gross features of the mean flow for all the geometries examined, although some detailed differences were observed.