Properties of alkali-activated systems with stone powder sludge

This article investigates the effects of stone powder sludge on the microstructure and strength development of alkali-activated fly ash and blast furnace slag mixes. Stone powder sludge produced from a crushed aggregate factory was used to replace fly ash and granulated blast furnace slag at replacement ratios of 0%, 10%, 20%, and 30% by mass. The unit weight and compressive strength of the samples were measured, and scanning electron microscopy/energy dispersive spectroscopy and X-ray diffraction (XRD) analyses were performed. The test results indicated that the compressive strength of alkali-activated blast furnace slag mixes using stone powder sludge was higher than that of the alkali-activated blast furnace slag control mix, but the compressive strength of alkali-activated fly ash mixes decreased with increasing replacement ratio of stone powder sludge. Microscopy results indicated that for alkaliactivated blast furnace slag samples, broken surfaces were more evident than for the alkali-activated fly ash samples. For all XRD diagrams, broad and diffuse peaks were observed around 2θ = 35° (d = 2.96–3.03 Å), implying amorphous or short-ordering structure phases.     

Risk of boron and heavy metal pollution from agro-industrial wastes applied for plant nutrition

In this study, the effects of various agro-industrial wastes were investigated when applied to soil alone or in combination with chemical fertilizers, regarding the risks of boron and heavy metal pollution of soils and plants. Nine combinations of production residues from various agro-industries, urban wastes, and mineral fertilizers were applied to potatoes in a field experiment. The content of available boron in the soil differed significantly (p < 0.05) among the applications. Generally, B values were found to be slightly higher when soapstock, prina, and blood were used alone or in combination. Although total Co, Cd, and Pb contents of soils showed no significant differences between the applications, Cr content differed significantly (p < 0.05). No pollution risk was observed in soil in respect to total Co, Cd, Pb, and Cr contents. The amount of boron and heavy metals in leaves showed no significant differences among the applications. Cobalt, Cd, and Pb in leaves were at normal levels whereas Cr was slightly above normal but well under the critical level. Boron was low in tubers and varied significantly between applications such as Co and Cd. The Co content of tubers was high, Cd and Cr contents were below average, and Pb content was between the given values. Some significant correlations were found between soil characteristics and the boron and heavy metal content of soil, leaves, and tubers.     

Improvement of thermal hydrolysis rate of dichloroacetic acid using alcohol

Dichloroacetic acid (DCAA) is produced during the oxidation of trichloroethylene. It is also produced in drinking water treatment as a disinfection by-product. DCAA is a problem material, because of its toxicity. The objective of this research is to find the final products and the reaction pathway of the DCAA decomposition by hydrolysis, and to increase the hydrolysis rate. The removal of both chlorine atoms in DCAA structure was achieved with hydrolysis at around 75 degrees C, and the final products were oxalic acid and glycolic acid. The reaction pathway was the production of oxalic acid and glycolic acid from two glyoxylic acid molecules by Cannizzaro reaction after the glyoxylic acid production from dechlorination of DCAA with hydrolysis. The hydrolysis rate of DCAA was increased with the use of 90% ethanol solution as solvent. The activation energy of DCAA was about 80 kJ/mol in it, while it was around 105 kJ/mol in water.     

Assessment of water quality and trace metal contaminations in Mondolkiri province in the Northeastern part of Cambodia

Environmental Geochemistry and Health - The aim of the present study is to investigate water quality and potential trace metal contaminations in the Northeastern part of Cambodia. Tube well...     

Estimating historical landfill quantities to predict methane emissions

There are no observations for methane emissions from landfill waste in Ireland. Methane emissions are imputed from waste data. There are intermittent data on waste sent to landfill. We compare two alternative ways to impute the missing waste “data” and evaluate the impact on methane emissions. We estimate Irish historical landfill quantities from 1960–2008 and Irish methane emissions from 1968–2006. A model is constructed in which waste generation is a function of income, price of waste disposal and, household economies of scale. A transformation ratio of waste to methane is also included in the methane emissions model. Our results contrast significantly with the Irish Environmental Protection Agency’s (EPA) figures due to the differences in the underlying assumptions. The EPA’s waste generation and methane emission figures are larger than our estimates from the early 1990s onwards. Projections of the distance to target show that the EPA overestimates the required policy effort.     

High concentrations of persistent organic pollutants including PCBs,DDT, PBDEs and PFOS in little brown bats with white-nose syndrome in New York,USA

White-nose syndrome (WNS) is a condition associated with white fungal growth on ears, wings, and nose of hibernating bats; this condition has recently resulted in high bat mortality in the northeastern United States. Nevertheless, the pathogenesis of morbidity and mortality are still unknown. Elevated exposure to toxic contaminants could be a contributing factor via the consequent immunosuppression and endocrine disruption. In this study, diseased little brown bats (Myotis lucifugus) were collected from several hibernacula in eastern New York State in 2008. Fat tissues of bats were analyzed for polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), polybrominated biphenyls (PBBs), and organochlorine pesticides (OCPs; DDT, chlordanes, HCB, and HCH), and liver was analyzed for perfluorinated compounds (PFCs). A reference population of little brown bats, not affected by WNS, was also collected from a cave in Kentucky for the analysis of trace organic contaminants. Concentration of PCBs in fat tissues of bats from New York ranged from 1900 ng g^?1 to 35 000 ng g^?1, lipid wt, with the highest concentrations found in bats collected from caves in Albany County. High concentrations of PCBs were also found in bats from Kentucky (17 100–18 400 ng g^?1, lipid wt). Total PBDE concentrations in fat tissues ranged from 520 ng g^?1 to 10 900 ng g^?1, lipid wt, in bats from New York and from 4300 ng g^?1 to 13 000 ng g^?1, lipid wt, in bats from Kentucky. High concentrations of DDT (26 900 ng g^?1, lipid wt), chlordanes (6350 ng g^?1, lipid wt), and HCB (260 ng g^?1, lipid wt) were found in bats from New York. Concentrations of hexabromobiphenyl congener 153 (PBB 153) in bats from New York ranged from 8.6 ng g^?1 to 12 4000 ng g^?1, lipid wt. Concentrations of PFCs were on the order of a few tens to a few hundreds of nanograms per gram liver, on a wet weight basis. Overall, high concentrations of PCBs, PBDEs, DDT, and chlordanes were found in fat tissues of diseased bats from New York, although the concentrations in bats from non-diseased, reference population, from Kentucky were also high.     

Distribution of mono- through hexa-chlorobenzenes in floodplain soils and sediments of the Tittabawassee and Saginaw Rivers,Michigan

Introduction  

Chlorobenzenes are used as solvents or as feedstocks in the production of pesticide formulations, dyes, room deodorizers, moth-proofing agents, and de-inking solvents. Chlorobenzenes were produced by the Dow Chemical Company in Midland, Michigan, for several decades. In this study, concentrations of 12 chlorobenzene (CBz) congeners, from mono- to hexachlorobenzenes, were measured in more than 150 floodplain soil (FPS), surface sediment, and sediment core (SC) samples collected during 2002–2004 from the Pine River, Tittabawassee River, Shiawassee River, Saginaw River, and Saginaw Bay, Michigan.     

Effects of excited-state structures and properties on photochemical degradation of polybrominated diphenyl ethers: a TDDFT study

This study presents new insight into the photochemical degradation of polybrominated diphenyl ethers (PBDEs), and it provides details about the structures and properties of 27 PBDE congeners in the electronically excited state using the time-dependent density functional theory method. Each PBDE congener exhibited remarkably different geometries in the ground state and the excited state. The significant lengthening of C-Br bond in each PBDE congener was observed in the excited state for the first time by theoretical calculation, which is directly involved in the photochemistry reductive debromination of n-BDE to (n−1)-BDE. Generally, the lengthening of C-Br bonds cannot occur at the para position. Furthermore, the calculated results demonstrated that the photoreactivity of PBDEs increased with an increase of bromination degree. It was also found that the pattern of Br substituents had an effect upon the photoreactivity of PBDEs. These findings suggest that the information obtained in the excited state is crucial to the mechanism explanation of the photochemical degradation of PBDEs.     

Characterization of Urea Encapsulated by Biodegradable Starch-PVA-Glycerol

The influence of the blending ratio of biodegradable starch/polyvinyl alcohol (PVA)/glycerol in encapsulating urea has been investigated. It is found that water absorption capacity increased approximately 135 % as the amounts of starch, PVA and glycerol in the composite film increase. Therefore, the swell ability of the composite film is increased and the urea is released from the composite film in the wet environment. The FTIR shows that the urea had been encapsulated successfully in the composite films. Moreover, the soil burial biodegradation results indicated that the biodegradability of the starch/PVA/glycerol/urea composite film strongly depended on the PVA proportion in the composite film matrix. The DSC results show that the higher the amount of PVA in the composite film, the less change of the melting enthalpy value. The crystalline region of PVA remains after biodegradation.     

Methodology for Developing Flood Rule Curves Conditioned on El Niño‐Southern Oscillation Classification1

Lee, Se‐Yeun, Alan F. Hamlet, Carolyn J. Fitzgerald, and Stephen J. Burges, 2011. Methodology for Developing Flood Rule Curves Conditioned on El Niño‐Southern Oscillation Classification. Journal of the American Water Resources Association (JAWRA) 47(1):81‐92. DOI: 10.1111/j.1752‐1688.2010.00490.x Abstract: Regional climate varies on interannual and decadal time scales that in turn affect annual streamflows, flood risks, and reservoir storage deficits in mid‐summer. However, these variable elements of the climate system are generally not included in water resources operating policies that attempt to preserve a balance between flood risk and other water resources system objectives. A methodology for incorporating El Niño‐Southern Oscillation (ENSO) information in designing flood control curves is investigated. An optimization‐simulation procedure is used to develop a set of ENSO‐conditioned flood control rule curves that relate streamflow forecasts to flood control evacuation requirements. ENSO‐conditioned simulated flood risk and storage deficits under current operating policy are used to calibrate a unique objective function for each ENSO classification. Using a case study for the Columbia River Basin, we demonstrate that ENSO‐conditioned flood control curves constructed using the optimization‐simulation procedure consistently reduce storage deficits at a number of interrelated projects without increasing flood risk. For the Columbia Basin, the overall improvements in reservoir operations are relatively modest, and (in isolation) might not motivate a restructuring of flood control operations. However, the technique is widely applicable to a wide range of water resources systems and/or different climate indices.