Cyclodextrins: a new efficient absorbent to treat waste gas streams

Volatile Organic Compounds (VOCs) in the air provoke health and environmental concerns. This paper focuses on the absorption method to treat industrial polluted air loaded with VOCs. The key variable of this treatment being the choice of a suitable liquid absorbent, the aim of this research work is to investigate the effectiveness and the regeneration of a new potential family of absorbent: cyclodextrins (CDs). All CDs derivatives tested are able to decrease the Henry's law constant of toluene: a reduction of volatility up to 95% may be obtained, depending on CD nature and concentration. Moreover, absorption experiments show that beta-CD, which presents the highest absorption ability, is 250 time more efficient than water. The absorption efficiency is not totally correlated with static experiments, suggesting that, in addition to Henry's law constants and inclusion compounds stability, toluene diffusion into such solutions has to be taken into account. It is also to be noted that salt and pH variations seem to have little influence on the absorption capacity of CDs, which may be of great interest for industrial applications. Finally, since production of solid compounds was not observed during these experiments and since temperature decreases the capture ability in a drastic way, regeneration of the washing solution can be achieved by heating the solution in combination with air stripping.     

Level of contamination and impact of pesticides in cupped oyster, Crassostrea gigas, reared in a shellfish production area in Normandy (France)

Over the last decade, oysters in the Bay of Veys (Northwest France) have sporadically experienced significant summer mortality events which appear to be due to a combination of extrinsic and intrinsic factors. In the present work, the involvement of pesticides (as additional stressors) was investigated using both artificial exposure and field studies (at two sites). Six herbicides were detected in seawater following tests for a total of 15 herbicides. The most estuarine site was the most contaminated, showing relatively high values compared with those recorded in a neighboring river. No pesticides were detected in the flesh of oysters in the field but exposure experiments led to an accumulation of two substituted ureas (diuron and isoproturon, from 0.5 micro g/L and 1 micro gL(- 1) respectively). Some physiological effects were observed in terms of reproduction (partial spawning) and histopathology (atrophy of the digestive tubule epithelium) but results related to other tissue alterations and to neutral red retention (NRR) assays were not conclusive and require further investigation.     

Deficit analysis: service capacity assessment and planning in developing countries – case study in the Philippines

Current demand analysis methods do not formally cover the case of chronic deficits in quantity or quality of water and sanitation services. These services include drinking water supply (DWS), wastewater and sewage treatment (WST), and municipal solid waste management (MSW). Formal analysis of this case would, at minimum, define the deficit state and evaluate appropriate options for reducing it. This paper proposes for a formal analytical model for municipal sanitation systems (MSS) that operate with deficits in at least one of the constituent services of DWS, WST, or MSW. The model introduces definitions and notation for describing the deficit state for conducting demand analysis on municipal sanitation systems. This model of demand analysis for systems with chronic deficits will hereinafter be referred to as deficit analysis. A case study for Bacoor, Philippines is presented as an example.     

Bedload transport and bedforms migration under sand supply limitation

Environmental Fluid Mechanics - Most studies on sediment transport and bedforms migration consider unlimited sediment supply conditions. However, areas where the sediment supply is limited are...     

Soil C and N models that integrate microbial diversity

Industrial agriculture is yearly responsible for the loss of 55–100 Pg of historical soil carbon and 9.9 Tg of reactive nitrogen worldwide. Therefore, management practices should be adapted to preserve ecological processes and reduce inputs and environmental impacts. In particular, the management of soil organic matter (SOM) is a key factor influencing C and N cycles. Soil microorganisms play a central role in SOM dynamics. For instance, microbial diversity may explain up to 77 % of carbon mineralisation activities. However, soil microbial diversity is actually rarely taken into account in models of C and N dynamics. Here, we review the influence of microbial diversity on C and N dynamics, and the integration of microbial diversity in soil C and N models. We found that a gain of microbial richness and evenness enhances soil C and N dynamics on the average, though the improvement of C and N dynamics depends on the composition of microbial community. We reviewed 50 models integrating soil microbial diversity. More than 90 % of models integrate microbial diversity with discrete compartments representing conceptual functional groups (64 %) or identified taxonomic groups interacting in a food web (28 %). Half of the models have not been tested against an empirical dataset while the other half mainly consider fixed parameters. This is due to the difficulty to link taxonomic and functional diversity.     

Impact of municipal solid waste dumpsites on trace metal contamination levels in the surrounding area: a case study in West Africa,Abidjan, Cote d’Ivoire

Environmental Science and Pollution Research - The impact of uncontrolled municipal dumping sites on metal contamination in the surrounding waters, sediments, and soils are of great concern in many...     

A direct observation study of nighttime safety belt use in Indiana

INTRODUCTION: Nearly all direct observation studies of safety belt use are conducted exclusively during daylight hours. Recent work has suggested that safety belt use at night may differ from daytime belt use. METHODS: An observational study of nighttime safety belt use, utilizing specialized night vision equipment, was conducted in Indiana surrounding the Click It or Ticket 2006 safety belt mobilization activities. A pre- and a post-mobilization statewide direct observation survey was conducted at night coinciding with daytime safety belt use data collection conducted by the state of Indiana. Daytime and nighttime belt use rates were compared. RESULTS: The comparisons across the mobilization period revealed a significant increase during the day, but a significant decrease at night. Comparisons between daytime and nighttime belt use revealed no overall difference during the pre wave, but a significant difference during the post wave. Finally, many common daytime trends in belt use were also found at night, with the exception of the typical age and seating position effects. DISCUSSION: The mobilization activities had a positive effect on daytime belt use, but no effect on nighttime belt use, likely resulting in the differences between daytime and nighttime belt use observed during the post wave. IMPACT ON INDUSTRY: The findings of this study suggest that safety belt mobilizations implemented only during the day do not influence nighttime safety belt use. Changes to how these programs are implemented or additional programs specifically targeting belt use at night should be considered, along with continued monitoring of nighttime belt use.     

Assessment of eco-labelling criteria development from a strategic sustainability perspective

To turn current patterns of consumption and production in a sustainable direction, solid and understandable market information on the socio-ecological performance of products is needed. Eco-labelling programmes have an important role in this communication. The aim of this study is to investigate what gaps there may be in the current criteria development processes in relation to a strategic sustainability perspective and develop recommendations on how such presumptive gaps could be bridged. First a previously published generic framework for strategic sustainable development is described and applied for the assessment of two eco-labelling programmes. Data for the assessment is collected from literature and in semi-structured interviews and discussions with eco-labelling experts.The assessment revealed that the programmes lack both an operational definition of sustainability, and a statement of objectives to direct and drive the criteria development processes. Consequently they also lack guidelines for how product category criteria might gradually develop in any direction. The selected criteria mainly reflect the current reality based on a selection of negative impacts in ecosystems, but how this selection, or prioritization, is made is not clearly presented. Finally, there are no guidelines to ensure that the criteria developers represent a broad enough competence to embrace all essential sustainability aspects.In conclusion the results point at deficiencies in theory, process and practice of eco-labelling, which hampers cohesiveness, transparency and comprehension. And it hampers predictability, as producers get no support in foreseeing how coming revisions of criteria will develop. This represents a lost opportunity for strategic sustainable development. It is suggested that these problems could be avoided by informing the criteria development process by a framework for strategic sustainable development, based on backcasting from basic sustainability principles.     

Airborne foliar transfer of particular metals in Lactuca sativa L.: translocation,phytotoxicity, and bioaccessibility

The uptake, translocation, and human bioaccessibility of metals originating from atmospheric fine particulate matters (PM) after foliar exposure is not well understood. Lettuce (Lactuca sativa L.) plants were exposed to micronic PbO, CuO, and CdO particulate matters (PMs) by the foliar pathway and mature plants (6 weeks old) were analyzed in terms of: (1) metal accumulation and localization on plant leaf surface, and metal translocation factor (TF) and global enrichment factor (GEF) in the plants; (2) shoot growth, plant dry weight (DW), net photosynthesis (Pn), stomatal conductance (Gs), and fatty acid ratio; (3) metal bioaccessibility in the plants and soil; and (4) the hazard quotient (HQ) associated with consumption of contaminated plants. Substantial levels of metals were observed in the directly exposed edible leaves and newly formed leaves of lettuce, highlighting both the possible metal transfers throughout the plant and the potential for human exposure after plant ingestion. No significant changes were observed in plant biomass after exposure to PbO, CuO, and CdO-PMs. The Gs and fatty acid ratio were increased in leaves after metal exposure. A dilution effect after foliar uptake was suggested which could alleviate metal phytotoxicity to some degree. However, plant shoot growth and Pn were inhibited when the plants are exposed to PbO, and necrosis enriched with Cd was observed on the leaf surface. Gastric bioaccessibility of plant leaves is ranked: Cd?>?Cu?>?Pb. Our results highlight a serious health risk of PbO, CuO, and CdO-PMs associated with consumption of vegetables exposed to these metals, even in newly formed leaves in the case of PbO and CdO exposure. Finally, the study highlights the fate and toxicity of metal rich-PMs, especially in the highly populated urban areas which are increasingly cultivated to promote local food.

     

The role of epicuticular waxes on foliar metal transfer and phytotoxicity in edible vegetables: case of Brassica oleracea species exposed to manufactured particles

Environmental Science and Pollution Research - The rapid industrialization and urbanization of intra- and peri-urban areas at the world scale are responsible for the degradation of the quality of...