Microbial pullulan for food,biomedicine, cosmetic,and water treatment: a review

Environmental Chemistry Letters - Most fossil fuel-derived polymers used for food packaging are non-biodegradable and induce pollution by microplastic, calling for safer material. Here we review...     

Biocatalytic polymeric membranes to decrease biofilm fouling and remove organic contaminants in wastewater: a review

The presence of recalcitrant contaminants in wastewater is major challenge to decrease pollution and associated health issues. As a consequence, membrane technologies have recently attracted industrial attention, yet a major setback of membrane employment is membrane fouling which leads to frequent discarding of membrane modules. More than 45% of all membrane fouling cases are caused by biofilms that are resistant to antimicrobial agents. Here we review polymeric membranes with antifouling properties, with focus on surface properties, fabrication, characterization, biocatalysis using enzymes and application towards the removal of dyes, phenol, pesticides and fertilizers. Nano-engineered fabrication of polymeric membranes allow to decrease fouling by 80–90%. Immobilized oxidoreductases in polymeric membranes allow 65–98% removal contaminants in wastewater.

     

Three-phase partitioning for the separation of proteins,enzymes, biopolymers,oils and pigments: a review

Environmental Chemistry Letters - Modern biomass and organic waste are becoming major, carbon-neutral sources of fine chemicals, biomolecules and fuels to replace fossil fuel products. As a...     

Synergetic integration of laccase and versatile peroxidase with magnetic silica microspheres towards remediation of biorefinery wastewater

In this study, a tailor-made biocatalyst consisting of a co-immobilized lignolytic enzyme cascade on multi-functionalized magnetic silica microspheres (MSMS) was developed. Physical adsorption was the most promising strategy for the synthesis of individual immobilized laccase (IL), immobilized versatile peroxidase (IP), as well as co-immobilized laccase (Lac) and versatile peroxidase (VP) with an enzyme activity recovery of about 79, 93, 27, and 27.5%, respectively. Similarly, the biocatalytic load of 116, 183, 23.6, and 31 U/g was obtained for IL, IP, and co-immobilized Lac and VP, respectively. The co-immobilized enzyme system exhibited better pH stability than the free and individual immobilized system by retaining more than 100% residual activity at pH 7.0 after a 150-h incubation; whereas, the thermal stability and kinetics of the co-immobilized biocatalyst were not much improved. IL and IP could be recycled for 10 cycles after which they retained 31 and 44% of their initial activities. Co-immobilized Lac and VP were reused for ten consecutive cycles at the end of which Lac activity was depleted, and 37% of VP activity was left. Free enzymes, IL, IP, co-immobilized Lac, and VP were applied to biorefinery wastewater (BRW) in a batch study to investigate the transformation of phenolic contaminants over a period of 5 days. The major classes of phenolic constituents in terms of their order of removal in a Lac-VP system was phenol >2-chlorophenol > trichlorophenol > dichlorophenol > cresols > dimethylphenol >2 methyl- 4, 6-dinitrophenol > 4-nitrophenol > tetrachlorophenols > pentachlorophenol. The free enzymes and individually immobilized enzymes resulted in 80% dephenolization in 5 days. By contrast, the co-immobilized biocatalyst provided rapid dephenolization yielding the same 80% removal within 24 h and 96% removal of phenols in 60 h after which the system stabilized, which is the major advantage of the co-immobilized biocatalyst.

Open image in new window

? Graphical abstract

     

Characterization of fuel gas products from the treatment of solid waste streams with a plasma arc torch

This work addresses the plasma treatment of two solid waste streams and production of fuel gases from the process. In this study, carpet waste and simulated solid wastes generated by a United States Air Force Basic Expeditionary Airfield Resources Base deployment were used. Waste was treated in a furnace fitted with a 100kW plasma arc torch. The off gas was analyzed to determine its composition. The product gas was composed primarily of carbon monoxide and hydrogen, with small amounts of methane, benzene and toluene also detected. These experiments demonstrate the feasibility of producing fuel gases by plasma treatment of the solid waste streams. While the thermal energy value of the fuel gas produced in these experiments was less than the energy input, a higher waste-to-fuel gas conversion efficiency is expected in full-scale application.     

Inventory compilation and distribution of heavy metals in wastewater from small-scale industrial areas of Delhi, India

Delhi has the highest cluster of small-scale industries (SSI) in India. There are generally less stringent rules for the treatment of waste in SSI due to less waste generation within each individual industry. This results in SSI disposing of their wastewater untreated into drains and subsequently into the river Yamuna, which is a major source of potable water in Delhi, thus posing a potential health and environmental risk to the people living in Delhi and downstream. To study the quantity, quality and distribution of heavy metals in liquid waste from industrial areas, wastewater, suspended materials and bed sediments were collected from industrial areas and from the river Yamuna in Delhi. This study has also focused on the efficiency of production processes in small-scale industries in India. Heavy metals such as Fe, Mn, Cu, Zn, Ni, Cr, Cd, Co and Pb were detected using a GBC 902 atomic absorption spectrometer. The concentration of heavy metals observed was as follows: Fe 2-212, Mn 0.3-39, Cu 0.2-20, Zn 0.2-5, Ni 0.6-6, Cr 0.2-53, Cd 0.08-0.2, Co 0.013-0.55, Pb 0.3-0.7 mg L(-1) in wastewater; Fe 5842-78 000, Mn 585-10 889, Cu 206-7201, Zn 406-9000, Ni 22-3621, Cr 178-10 533, Co 17-114, Cd 13-141, Pb 67-50 171 mg kg(-1) in suspended material; and Fe 3000-84000, Mn 479-1230, Cu 378-8127, Zn 647-4010, Ni 164-1582, Cr 139-3281, Co 20-54, Cd 37-65, Pb 228-293 mg kg(-1) in bed residues. This indicates that SSI could be one of the point sources of metals pollution in the river system.     

Validation of an Automated Multiunit Composting System

Biodegradable packaging has high potential to help solve the crisis of non-biodegradable plastic waste causing an increase in the footprint of landfills. However, more research needs to be executed to develop a larger assortment of biodegradable plastics for numerous applications and to make them more economical to manufacture. This paper discusses the design and validation of an automated composting system (AMUCS) that fits the requirements of the American Society for Testing and Materials (ASTM) 5338-11 standard. The results of the experiments show that the AMUCS was able to create and maintain the conditions for biodegradation of biodegradable polymers in compost using microcrystalline cellulose. The biodegradation caused by the composting environment was observed visually with the naked eye and on the micro scale with an environmental scanning electron microscope. The magnitude of biodegradation was measured by calculating the carbon metabolized from the samples. The carbon metabolized from the three compost replicates was consistent and linear, and there was only an 8 % difference between the non-biodegradable low density polyethylene and the compost. For the biodegradation study according to ASTM D 5338-11, the experiment was validated with the use of cellulose as a reference material. Under controlled composting conditions, the mineralization of microcrystalline cellulose yielded 72.05 %, which is slightly higher than the 70 % mineralization requirement.