苯并三唑在土壤中的吸附特性

为了解苯并三唑(BTA)在水-土系统中的迁移转化,通过批实验方法研究了BTA在华北平原土样(GSS13)中的吸附,考察了平衡时间、土壤投加量、溶液初始pH以及共存阳离子对吸附的影响。结果表明,在初始阶段,土壤对BTA的吸附速率较快,之后随着吸附点位的减少,吸附逐渐变慢;吸附过程符合准二级反应动力学方程。土壤对BTA的平衡吸附为非线性吸附,吸附等温线为Freundlich型;随着土壤投加量的增大,单位质量土壤吸附BTA的量减少,可能原因是所选土壤对BTA的吸附存在"固体浓度效应"。溶液的pH通过改变BTA的存在形式和土壤表面的带电性而影响吸附,当溶液pH在BTA的pKa2(8.6)附近时,土壤对BTA的吸附效果最好。此外,溶液中共存阳离子对土壤吸附BTA有不同的影响, Na+对吸附影响不明显,而不同浓度Ca2+对BTA的吸附有不同程度的促进作用。     

竹炭-微生物联合法对沼液中氨氮的去除

采用竹炭-微生物联合法,考察了竹炭用量、菌液用量、进水氨氮浓度、pH、DO、HRT等因素对氨氮废水处理效果的影响;同时采用对比实验,初步探讨了竹炭-微生物联合法处理沼液的作用机理。结果表明,竹炭-微生物法去除沼液氨氮的最优条件推荐为:竹炭用量30 g/L,微生物活性液用量3%,pH 7.0～8.0,DO为2 mg/L,HRT为48 h。竹炭-微生物法对沼液氨氮的去除过程可用一级反应动力学模型C=272.56e-0.0148描述,其去除效果来源于竹炭吸附和生物降解的协同作用,协同程度为48.45%。     

冬季人工湿地工程对三氯生的去除效果

为了明确北方大规模人工湿地在冬季对TCS(三氯生)的去除效果,在山东省境内4个典型的大规模人工湿地(即武河人工湿地、大沙河人工湿地、新薛河人工湿地和洸府河人工湿地)内于冬季(2013年12月—2014年1月)进行取样,以超高效液相色谱串联质谱法测定人工湿地进出水中ρ(TCS),并分析不同湿地对TCS的去除效果. 结果表明:TCS在4个人工湿地系统进出水中均有检出,由于各人工湿地系统均承接当地污水处理厂尾水,冬季进水中ρ(TCS)偏高,为(800.81±83.37)~(1 151.00±47.13) ng/L,并以武河人工湿地为最高. 虽然人工湿地对TCS的去除率达22.44%~78.82%,但经由人工湿地处理后出水中仍含有较高浓度的TCS残留,经由人工湿地出水进入下游水体的TCS日释放量仍较高,其中洸府河人工湿地出水中高达92.60 g. 因此,冬季各人工湿地对TCS的去除效果在低温影响下有所降低,并且对下游水体和人类健康的威胁不容忽视.      

缅怀中国环境科学研究院环境基准与风险评估国家重点实验室学术委员会副主任傅家谟院士

正2015年6月11日,中国地球化学学科奠基人、中国科学院院士、中国环境科学研究院环境基准与风险评估国家重点实验室学术委员会副主任傅家谟先生因病医治无效在广州逝世。一位中国环境保护的学术泰斗、有机石油地球化学的奠基人与开拓者,温和可亲的谦谦长者离我们而去。听到这个悲痛的消息,不敢也不愿意相信。我与傅先生相识多年,这位亦师亦友的前辈像父亲一样给予我很多指导、关怀和帮助,回想与傅先生相识的点点滴滴,他满头白发、精神矍铄的音容笑貌仿佛又出现在我的眼前,永远无法忘怀。     

净化SO2的生物膜填料塔中微生物类群分析

对净化废气中SO2的生物膜填料塔内的微生物进行了分离纯化并做鉴定,得到一株嗜酸性氧化硫硫杆菌（Acidithiobacillus thiooxidans IEL001）和一株分类地位非常接近链二孢属（Bispora sp.）的极端嗜酸真菌IEL002,生物膜填料塔内的极端酸性环境和有机营养的缺乏导致生物膜上的微生物种类较为单一,多样性程度不高。本研究还发现IEL002自身并不能氧化单质硫,但它能促进Acidithiobacillus thiooxidans IEL001对单质硫的氧化。     

Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu²⁺ and Cd²⁺, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.     

Effects of Natural and Artificial Weathering on the Physical Properties of Recycled Poly(ethylene terephthalate)

In accelerated weathering tests, specimens are exposed to higher radiation intensity, temperature and humidity than is likely under natural weathering in order to achieve rapid degradation of the polymer in a convenient short time. In the current work, a correlation between the two environments is attempted so that a prediction of lifetimes in the natural environment can be achieved. During aging, surface flaws are created due to the chain scission process. This is initiated by the absorption of ultra-violet light and directly affects visual appearance and impact strength. After natural weathering, the material shows only plastic deformation in an impact test. However, after artificial weathering to 5000 h of UV exposure, there is a decrease of 85% in impact strength. Colour change occurs at a high rate in the early stages of UV exposure. Beyond 2000 h of exposure, the colour change approaches a steady state and a correlation between the changes under natural and artificial weathering becomes apparent for a potential prediction of lifetimes. From the analysis including the specular component (SCI), taking surface roughening into account, 1 year under natural weathering was found to be equivalent to 25 days under accelerated weathering.