Clove bud oil: an efficient, economical and widely available oil for the inhibition of wheat seed germination

Pre-harvest sprouting refers to the precocious germination of the grain in the spike prior to harvest as a result of moist weather conditions at harvest time. From the agricultural viewpoint, it is necessary to impose an exogenous dormancy to wheat seeds in order to improve the resistance of seed to pre-harvest sprouting. In this regard, we found that clove bud essential oil is a strong inhibitor for wheat seed germination. The extract obtained from clove bud by supercritical fluid extraction using CO₂ as solvent minimized the number of extracts to two compounds, eugenol and eugenyl acetate. Eugenol, as the main constituent of the oil, was responsible for its strong inhibitory activity in wheat seeds. The aqueous solution of clove bud oil was submitted to germination assay at various concentrations from 50 to 400 mg/L. Complete inhibition of seed germination was recorded when the concentration was 400 mg/L. Roots and sprouts have similar sensitivity to inhibitory effect. In an empirical study, the synergistic cooperation of eugenol and eugenyl acetate from clove bud oil in the inhibition of seed germination was found to be a 1:1 ratio. The clove bud essential oil is widely available and will broaden the horizon of applications for natural and safe inhibitors in the fields.     

Magnetic Cr(VI) Ion Imprinted Polymer for the Fast Selective Adsorption of Cr(VI) from Aqueous Solution

In this study, a novel magnetic Cr(VI) ion imprinted polymer (Cr(VI)-MIIP) was successfully synthesized and used as a selective sorbent for the adsorption of Cr(VI) ions from aqueous solution. It can be synthesized through the combination of an imprinting polymer and magnetic nanoparticles. The high selectivity achieved using MIIP is due to the specific recognition cavities for Cr(VI) ions created in Cr(VI)-MIIP. Also, the magnetic properties that could be obtained using magnetic nanoparticles, helps to separate adsorbent with an external magnetic field without either additional centrifugation or filtration procedures. The magnetic Fe₃O₄ nanoparticles (MNPs) were synthesized using an improved co-precipitation method and modified with tetraethylorthosilicate (TEOS) before imprinting. The magnetic Cr(VI) ion imprinted polymer was prepared through precipitation copolymerization of 4-vinylpyridine as the complexing monomer, 2-hydroxyethyl methacrylate as a co-monomer, the Cr⁶⁺ anion as a template, and ethylene glycol dimethacrylate (EGDMA) as a cross-linker in the presence of modified magnetite nanoparticles. This novel synthesized sorbent was characterized using different techniques. Batch adsorption experiments were performed to evaluate the adsorption conditions, selectivity, and reusability. The results showed that the maximum adsorption capacity was 39.3 mg g^?1, which was observed at pH 3 and at 25?°C. The equilibrium time was 20 min, and the amount of adsorbent which gave the maximum adsorption capacity was 1.7 g L^?1. Isotherm studies showed that the adsorption equilibrium data were fitted well with the Langmuir adsorption isotherm model and the theoretical maximum adsorption capacity was 44.86 mg g^?1. The selectivity studies indicated that the synthesized sorbent had a high single selectivity sorption for the Cr(VI) ions in the presence of competing ions. Thermodynamic studies revealed that the adsorption process was exothermic (\(\Delta H\)?<?0) and spontaneous (\(\Delta G\)?<?0). In addition, the spent MIIP can be regenerated up to five cycles without a significant decrease in adsorption capacity.     

The addition of organic carbon and nitrate affects reactive transport of heavy metals in sandy aquifers

Organic carbon introduction in the soil to initiate remedial measures, nitrate infiltration due to agricultural practices or sulphate intrusion owing to industrial usage can influence the redox conditions and pH, thus affecting the mobility of heavy metals in soil and groundwater. This study reports the fate of Zn and Cd in sandy aquifers under a variety of plausible in-situ redox conditions that were induced by introduction of carbon and various electron acceptors in column experiments. Up to 100% Zn and Cd removal (from the liquid phase) was observed in all the four columns, however the mechanisms were different. Metal removal in column K1 (containing sulphate), was attributed to biological sulphate reduction and subsequent metal precipitation (as sulphides). In the presence of both nitrate and sulphate (K2), the former dominated the process, precipitating the heavy metals as hydroxides and/or carbonates. In the presence of sulphate, nitrate and supplemental iron (Fe(OH)(3)) (K3), metal removal was also due to precipitation as hydroxides and/or carbonates. In abiotic column, K4, (with supplemental iron (Fe(OH)(3)), but no nitrate), cation exchange with soil led to metal removal. The results obtained were modeled using the reactive transport model PHREEQC-2 to elucidate governing processes and to evaluate scenarios of organic carbon, sulphate and nitrate inputs.     

Relationships between certain individual characteristics and occupational accidents

Background. Work accidents and injuries are an occupational health and safety problem. Methods. This cross-sectional study was conducted for 404 frontline workers who were randomly selected from the Arya Sasol Petrochemical Company in Bushehr, Iran, during 2016. A statistical analysis was performed using the χ² test and the logistic regression model with SPSS version 18. Results. The overall occupational accident rate among the participants was found to be 9.2%. Statistically significant differences were observed for body mass index, education, job experience, smoking habit, consumption of sedative pills and presence of sleep disorders. Three factors had significant adjusted odds ratios (ORs): body mass index (OR 2.41, 95% confidence interval [CI] [1.16, 5.04]), education (OR 0.25, 95% CI [0.07, 0.85]) and job experience (OR 0.29, 95% CI [0.15, 0.57]). Conclusions. Preventive programs should be implemented for industrial workers, especially young workers, workers who smoke, overweight workers and workers with psychosomatic disease.     

Hollow-fiber liquid-phase microextraction based on carrier-mediated transport for determination of urinary methyl hippuric acids

Hollow-fiber liquid-phase microextraction based on carrier-mediated transport for analysis of methyl hippuric acids in aqueous samples is described. Under optimized conditions, relative recoveries of 83%–98% and limits of detection of 2–3 µg L^?1 were obtained, with linear calibration curves for the three isomers in the range of 10–50,000 µg L^?1. The method was applied for the determination of urine samples of volunteers at various working environments.     

Recognizing animal personhood in compassionate conservation

Compassionate conservation is based on the ethical position that actions taken to protect biodiversity should be guided by compassion for all sentient beings. Critics argue that there are 3 core reasons harming animals is acceptable in conservation programs: the primary purpose of conservation is biodiversity protection; conservation is already compassionate to animals; and conservation should prioritize compassion to humans. We used argument analysis to clarify the values and logics underlying the debate around compassionate conservation. We found that objections to compassionate conservation are expressions of human exceptionalism, the view that humans are of a categorically separate and higher moral status than all other species. In contrast, compassionate conservationists believe that conservation should expand its moral community by recognizing all sentient beings as persons. Personhood, in an ethical sense, implies the individual is owed respect and should not be treated merely as a means to other ends. On scientific and ethical grounds, there are good reasons to extend personhood to sentient animals, particularly in conservation. The moral exclusion or subordination of members of other species legitimates the ongoing manipulation and exploitation of the living worlds, the very reason conservation was needed in the first place. Embracing compassion can help dismantle human exceptionalism, recognize nonhuman personhood, and navigate a more expansive moral space.     

Silica-supported antimony(III) chloride as a mild and reusable catalyst for the Paal–Knorr pyrrole synthesis

Heterogeneous catalysts are used for control of environmental pollution. Heterogeneous catalysts are easily separated from the reaction mixture, thus allowing their recovery and re-use. There is a need for catalysts that are efficient under mild conditions. Here, we show that silica-supported antimony(III) chloride (SbCl₃/SiO₂) acts as a highly efficient heterogeneous Lewis acid catalyst for the Paal–Knorr pyrrole synthesis at room temperature. We found that condensation of hexane-2,5-dione with aromatic and aliphatic primary amines in hexane using SbCl₃/SiO₂ with 7.6 wt% SbCl₃ was the best reaction condition. The silica support facilitated the workup of the reaction mixture and provided a reusable catalyst at least for 7 runs without significant loss in activity. Indeed, the yield was 98% for the first run and 84% for the 7th run. We conclude that low catalyst loading, operational simplicity, practicability and applicability to various substrates make this reaction an interesting alternative to previously applied procedures. From the environmental standpoint, this eco-friendly catalyst is stable, highly active, easy to prepare and handle.     

Catalytic evaluation of promoted CeO2-ZrO2 by transition, alkali, and alkaline-earth metal oxides for diesel soot oxidation

Series of mixed metal oxides were synthesized by gel-combustion method and their catalytic activities for soot oxidation were investigated. The catalysts were M-Ce-Zr （M = Mn, Cu, Fe, K, Ba, Sr）, and χK-20Mn-Ce-Zr （χ= 0, 5, 10, 20）, they were characterized by XRD, SEM, TPR and BET surface area techniques. The results of soot temperature programmed oxidation （TPO） in an O2 oxidizing atmosphere indicate that K-Ce-Zr has the highest catalytic activity for soot oxidation under loose contact condition, due to enhancement of the soot and catalyst contacts. On the other hand, under a tight contact condition, Mn-Ce-Zr and Cu-Ce-Zr nano-composites have high activities for soot oxidation and lower the soot TPO peak temperatures by about 280 and 270℃, respectively, as compared to non-catalytic soot oxidation. Furthermore, the addition of up to 10 wt.% potassium oxides into Mn-Ce-Zr increases its catalytic activity and further reduces the soot TPO peak temperature by about 40℃ under loose contact condition.     

Effect of carbon and nitrogen source amendment on synthetic dyes decolourizing efficiency of white-rot fungus, Phanerochaete chrysosporium

Decolourization activity of Phanerochaete chrysosporium for three synthetic dyes viz., congo red, malachite green and crystal violet and impact of additional carbon and nitrogen supply on decolourization capacity of fungus were investigated. Maximum decolourizing capacity was observed up to 15 ppm. Addition of urea as nitrogen source and glucose as carbon source significantly enhanced decolourizing capacity (up to 87%) of fungus. In all the cases, both colour and COD were reduced more in non-sterilized treatments as compared to sterilized ones. Significant reductions in COD content of dye solutions (79-84%) were recorded by fungus supplied with additional carbon and nitrogen. A highly significant correlation (r = 0.78, p < 0.001) between colour and COD of dye solutions was recorded. Thus, a readily available carbon and nitrogen source is imperative to enhance the bioremediation activity of this fungus which has been the most suitable for synthetic dyes and textile industry wastewater treatment.