The distribution of molybdenum in the tissues of wild ducks

The Mo contents and the relations between Mo and Cu or Crcontents were investigated in the organs of Japanese wild ducks(spotbill duck, pintail, wigeon, scaup and tufted duck). Thehighest Mo content in kidney and liver of the dabbling duckswere more than 30 g g^-1 dry weight (g g^-1 d.wt.), though that of diving ducks were less than 11 gg^-1 d. wt. The contents were lower in the ducks migratingwithin Japan, Eurasia and North America than those in the birdsmigrating between Japan and Eurasia. The contents of liver inall species were more than 50 and less than 5 g g^-1 d.wt. for Cu and Cr, respectively. Significant correlations werefound between Mo and both elements in pintail and scaup, and Moand Cr in tufted duck. These results suggest that thecontamination of wild ducks reflects the reproductive area, andnot the collected area. Mo contents closely correlated with theCu and/or Cr contaminations.     

Protein that makes sense in the Argentine ant

With a protein-based approach, we have identified and cloned the cDNA encoding a chemosensory protein (LhumCSP) in the Argentine ant, Linepithema humile. The open reading frame of the cloned cDNA encoded a signal peptide (20 residues), and a mature protein (pI 4.62) of 106 amino acid residues. The calculated molecular mass (12,453 Da) was in agreement with the molecular mass measured by on-line chromatography-electrospray ionization mass spectrometry (12,448 Da), given the formation of two disulfide bridges. LhumCSP shared sequence similarity with various CSPs, particularly those identified and/or cloned from moth species. Also, LhumCSP showed the hallmark of the chemosensory proteins, i.e., four well conserved cysteine residues. The antennal protein was not detected in non-olfactory tissues (leg and thorax) contrary to a putative pheromone-binding protein isolated from the thorax of the red imported fire ant, Solenopsis invicta. In addition, these findings suggest that, as in Orthopterans and Phasmids, the protein that makes sense in the Argentine ant is not an odorant-binding protein, but rather a chemosensory protein.     

Synthesis of Short-chain-length/Medium-chain-length Polyhydroxyalkanoate (PHA) Copolymers in Peroxisome of the Transgenic Arabidopsis Thaliana Harboring the PHA Synthase Gene from Pseudomonas sp. 61-3

In this paper, the photosynthetic production of short-chain-length/medium-chain-length polyhydroxyalkanoate (PHA) copolymers is reported. The wild-type and highly active doubly mutated PHA synthase 1 (S325T/Q481K, abbreviated ST/QK) genes from Pseudomonas sp. 61-3 were introduced into Arabidopsis thaliana. Peroxisome targeting signal 1 (PTS1) was used to target PHA synthases into the peroxisome to synthesize PHA from the intermediates of the β-oxidation pathway. The transgenic Arabidopsis produced PHA copolymers consisting of 40–57 mol% 3-hydroxybutyrate, 21–49 mol% 3-hydroxyvalerate, 8–18 mol% 3-hydroxyhexanoate, and 2–8 mol% 3-hydroxyoctanoate. The maximum PHA contents were 220μ g/g cell dry weight (cdw) in leaves, and 36μ g/g cdw in stems, respectively. The expression of the ST/QK mutated PHA synthase in leaves gene did not lead to significant difference in PHA content and monomer composition of PHAs, compared to the wild-type PHA synthase gene, suggesting that the supply of monomers may be a rate-determining step of PHA biosynthesis in the peroxisome. However, in stems, there were significant differences dependent on whether the wild-type or ST/QK mutated PHA synthase was expressed. These results suggest that tissue-specific monomer availability is important in determining the final mol% composition of PHA copolymers produced by the peroxisome in plants.     

Resource Use Dynamics and Land-Cover Change in Ang Nhai Village and Phou Phanang National Reserve Forest, Lao PDR

This study integrated aerial photographs from 1952, 1981, and 1998, and a satellite image from 2000 with oral histories and socioeconomic surveys to assess changes in forest and land cover in Ang Nhai village, Laos. The study documents the history of resource use and changes in household access to resources in the village. Three distinctive trends were observed in terms of forest and land cover—forest degradation, deforestation, and regeneration. Project results suggest that land and forest cover change dynamically under different circumstances. The case study also points out that integration into the market economy can induce intensification of unused lowland areas, while removing pressures from upland areas previously used for supplementing agricultural production. In addition, the creation of a national reserve forest to restrict local access and forest use was an ineffective tool for regulating encroachment and logging activities.     

Evaluation of a recycling process for printed circuit board by physical separation and heat treatment

Printed circuit boards (PCBs) from discarded personal computer (PC) and hard disk drive were crushed by explosion in water or mechanical comminution in order to disintegrate the attached parts. More parts were stripped from PCB of PC, composed of epoxy resin; than from PCB of household appliance, composed of phenol resin.In an attempt to raise the copper grade of PCB by removing other components, a carbonization treatment was investigated. The crushed PCB without surface-mounted parts was carbonized under a nitrogen atmosphere at 873–1073 K. After screening, the char was classified by size into oversized pieces, undersized pieces and powder. The copper foil and glass fiber pieces were liberated and collected in undersized fraction. The copper foil was liberated easily from glass fiber by stamping treatment.As one of the mounted parts, the multi-layered ceramic capacitors (MLCCs), which contain nickel, were carbonized at 873 K. The magnetic separation is carried out at a lower magnetic field strength of 0.1 T and then at 0.8 T. In the +0.5 mm size fraction the nickel grade in magnetic product was increased from 0.16% to 6.7% and the nickel recovery is 74%.The other useful mounted parts are tantalum capacitors. The tantalum capacitors were collected from mounted parts. The tantalum-sintered bodies were separated from molded resins by heat treatment at 723–773 K in air atmosphere and screening of 0.5 mm. Silica was removed and 70% of tantalum grade was obtained after more than 823 K heating and separation.Next, the evaluation of Cu recycling in PCB is estimated. Energy consumption of new process increased and the treatment cost becomes 3 times higher comparing the conventional process, while the environmental burden of new process decreased comparing conventional process.The nickel recovery process in fine ground particles increased energy and energy cost comparing those of the conventional process. However, the environmental burden decreased than the conventional one.The process for recovering tantalum used more heat for the treatment and therefore the energy consumption increased by 50%, when comparing with conventional process. However, the market price for tantalum is very large; the profit for tantalum recovery is added. Also the environmental burden decreased by the recycling of tantalum recovery. Therefore, the tantalum recovery is very important step in the PCB recycling. If there is no tantalum, the consumed energy and treatment cost increase in the new process, though the environmental burden decreases.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

A quantitative water resource planning and management model for an industrial park level

This paper introduces an integrated water management model at the industrial park level. It suggests four approaches to water management: first, direct water reuse among users; second, water reuse among users by blending with freshwater; third, water reuse between users and a wastewater treatment plant; and fourth, groundwater recharge by reclaimed wastewater or other feasible applications in order to optimize the overall water efficiency. The model results in a comprehensive management methodology for optimizing water resources within an industrial park, seeking potential water reuse among industries, and incorporating the size and cost of reclaimed wastewater delivery systems. A case study is employed to test the model’s feasibility. An economic analysis of the optimized water use network is also carried out, showing the potential water and cost savings.     

Industrial and urban symbiosis in Japan: Analysis of the Eco-Town program 1997–2006

Japan's Eco-Town Program spearheaded in Japan the integration of Industrial Symbiosis and Urban Symbiosis, seeking to maximise the economic and environmental benefit from close geographic proximity of industrial and urban areas, through the use of previously discarded commercial, municipal and industrial waste materials in industrial applications. The program established 26 Eco-Towns around Japan. Approximately 1.65 billion USD was invested in 61 innovative recycling projects, with an average government subsidy of 36%. In addition at least 107 other recycling facilities have been constructed without government subsidy. 14 Eco-Towns primarily contributed to improving industry's productivity, whilst 10 Eco-Towns primarily contributed to improving environmental amenity. In 16 Eco-Towns the private sector was the most important actor supporting local government in the realisation of the Eco-Town, whilst in 9 Eco-Towns this was civil society. The availability of investment subsidies, the coming into force of ambitious recycling legislation with quantified, product-specific targets, access to the significant technological resources of the private sector, and widespread recognition of the urgency to act on environmental issues, all contributed to the success of the Eco-Town Program.     

Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA

A study was carried out in order to compare the environmental performance of two different types of adsorbents in removing arsenic (As) from wastewater. A FeCl₃-based adsorbent and a poly-Fe-based adsorbent were first synthesized and their abilities in adsorbing As from wastewater were investigated in terms of the adsorption density and the rate of adsorption. Here, it should be noted that the main material being used in the synthesis of the poly-Fe-based adsorbent was a waste product, known as polyferric sulfate or poly-Fe in short, which exits the manufacturing process of titanium dioxide.Both adsorbents were then compared in the context of life-cycle assessment (LCA). In other words, the experimental results (i.e. the value of the adsorption density and the rate of adsorption) were input into the LCA model in order to assess the environmental performance of each adsorbent in removing arsenic. An estimate for the environmental burden of each option was finally calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). The main finding of this study was that the adsorption of arsenic by using the poly-Fe-based adsorbent is more attractive treatment option in the environmental protection point of view than the adsorption by using the FeCl₃-based adsorbent, which generates a relatively larger environmental burden.