Will polycentric cities cause more CO2 emissions? A case study of 232 Chinese cities

From 2000 to 2010 China experienced rapid economic development and urbanization. Many cities in economically developed areas have developed from a single-center status to polycentricity. In this study, we used exploratory spatial data analysis (ESDA) to identify the population centers, which identified 232 cities in China as having urban centers. COMP was used to represent urban agglomeration, and POLYD (representing how far is the city's sub-centers to the main center), POLYC (representing the number of a city's centers), and POLYP (representing the population distributed between the main center and the sub-centers) were used to indicate urban polycentricity. Night light data were used to determine the CO₂ emissions from various cities in China. A mixed model was used to study the impact of urban aggregation and polycentric data on the CO₂ emission efficiency in 2000 and 2010. The study found that cities with higher compactness were distributed in coastal areas, and the cities with higher multicentricity were distributed in the Yangtze River Delta and Shandong Province. The more compact the city was, the less conducive it was to improving CO₂ emission efficiency. Polycentric development of the city was conducive to improving the CO₂ emission efficiency, but the number of urban centers had no significant relationship with the CO₂ emission efficiency. Our research showed that the compactness and multicentricity of the city had an impact on the CO₂ emission efficiency and provided some planning suggestions for the low carbon development of the city.     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]     

煤热解过程中无机有害元素的变迁规律

在自行设计的加压密闭快速热解反应器中研究了神华和义马煤中Na、K、Pb和Mn等无机有害元素在氮气条件下随温度（300℃-700℃)的变化规律,进一步考察了热解气氛（氮气、氢气和二氧化碳）、压力对神华煤中这4种元素逸出规律的影响。结果表明：Na、K、Pb和Mn等元素在半焦中的残留量随温度的升高而减少,减少量随煤种而异,如在700℃时,神华煤中Na、K、Pb和Mn的析出率分别是义马煤的3、4．2、1．4和2．4倍;低压快速加氢热解有利于这4种元素的逸出。Pb是挥发性最强的元素,与热力学计算结果一致。     

An improved method used for evaluating potential environmental pollution risk based on spatial distribution and density of farms

Environmental Science and Pollution Research - The livestock manure nitrogen load on farmland (LMNLF) is often used to assess the potential environmental pollution risk of livestock manure nitrogen...     

生活垃圾中废塑料分选回收技术概述

近年来,废塑料在城市生活垃圾中占有相当大的比例,其含量正呈逐年上涨的趋势,因此对塑料进行分选和资源化利用势在必行。塑料分选技术是摆在我们中间的一项难题,目前生活垃圾废塑料的分选技术五花八门．由于在全国各地废塑料在垃圾中的还水量等因素的影响,现实中能实现废塑料的分选还不成熟。因此,研究一套适合废塑料的分选技术迫在眉睫。     

城市工业区环境系统中的Cd污染循环及其健康风险——以杭州市半山工业区为例

为揭示重金属元素Cd在城市环境系统多种介质中的迁移途径及其潜在危害性,系统分析了杭州市半山工业区主要环境介质（土壤-尘埃-水-底泥-生物）样品中Cd的指标含量,并用连续提取法分析了土壤、尘埃、底泥中Cd的化学形态特征.结果表明,Cd的迁移途径主要有两种,一是以尘埃为媒介在地表环境中迁移,二是通过水介质进入水体环境（水和...     

农村生活污水处理技术的应用效果及其经济性分析研究——以重庆地区为例

为了解农村生活污水处理技术在应用过程中的效果.以重庆地区为例,对重庆市63个村庄的生活污水处理设施进行了调查.根据出水水质和建设成本,对村庄常用的污水处理技术进行经济技术综合比较分析.结果表明,无动力人工湿地较为经济,应用效果并不理想,在经济条件比较薄弱的地区可作为过渡型处理技术加以应用;渠道式生态沟投资较昂贵,不推荐使用;一体化设备投资昂贵,运行管理简单,在经济条件较好的地区可以考虑使用.     

基于本地污染源调查的杭州市大气污染物排放清单研究

基于实地调查数据并辅以统计数据,采用物料衡算法和排放因子法,估算了杭州市2015年大气污染物排放清单,并选取经纬度坐标、路网、航道、土地类型和人口等数据作为权重因子,研究了该地区各类排放源污染物排放空间分布特征.结果表明,杭州市2015年SO_2、NO_x、CO、VOCs、PM_(10)、PM_(2.5)和NH_3年排放总量分别为22.20×10~3、108.17×10~3、192.10×10~3、134.94×10~3、78.12×10~3、27.65×10~3和59.75×10~3t.工业源是杭州市SO_2排放的主要来源,移动源对NO_x和CO的排放贡献最为显著,扬尘源是杭州市PM_(10)和PM_(2.5)排放的最主要来源,其次为工业源;VOCs排放的主要来源依次为工业源、天然源和移动源;NH_3排放主要来自农业源.从空间分布来看,排放主要集中在中心城区及其周边的萧山、下沙、大江东、余杭和富阳等工业企业相对密集的区域.本研究建立的排放清单在污染源覆盖范围和排放因子方面仍然存在一定的不确定性,建议在后续研究中重点开展低、小、散企业及本地化排放因子调查研究工作,进一步提升大气污染物排放清单的准确度.     

序批式反应器生物强化处理苯酚废水的研究

将4株高效苯酚分解菌湿菌体分3批投加于序批式反应器(SBR),对活性污泥进行生物强化试验,分析活性污泥状态与性能变化,测定生物强化后对苯酚的降解能力.结果表明,随着生物强化过程的进行,沉降性能改善,污泥颗粒化趋势明显;生物强化后,活性污泥对苯酚降解能力、降解速率及对苯酚的耐受性明显提高:苯酚质量浓度为730～960mg/L时,苯酚完全降解时间可由正常的6h缩短至2h;6h内可完全降解苯酚的质量浓度由原来的880mg/L提高到2080mg/L,处理能力提高了1.36倍;当进水苯酚质量浓度增加到2400mg/L时,6h内污泥对苯酚的降解率仍达到60.1%.     

冷却-高压静电一体化技术在高温定型机油烟废气净化中的应用

采用冷却-高压静电一体化技术处理印染企业的高温定型机油烟废气,将蒸发冷却、间接水冷、高压静电法集成一体.弥补了传统水喷淋技术与湿法静电技术存在二次污染的不足.通过优化参数,提高了污染物去除率和废油,余热的回收率,白坯布高温定型机每天每台可回收废油188 kg.