Differences and similarities of gas and dust explosions: A critical evaluation of the European ‘ATEX’ directives in relation to dusts

Explosive gas mixtures and explosive dust clouds, once existing, exhibit similar ignition and combustion features. However, there are two basic differences between dusts and gases which are of substantially greater significance in design of safety standards than these similarities. Firstly, the physics of generation and up-keeping of dust clouds and premixed gas/vapour clouds are substantially different. This means that in most situations where accidental explosive gas clouds may be produced quite readily, generation of explosive dust clouds would be highly unlikely. Secondly, contrary to premixed gas flame propagation, the propagation of flames in dust/air mixtures is not limited only to the flammable dust concentration range of dynamic clouds. The state of stagnant layers/deposits offers an additional discrete possibility of flame propagation.

The two European Directives 94/9/EC (1994) and 1999/92/EC (1999) primarily address gases/vapours, whereas the particular properties of dusts are not addressed adequately. Some recent IEC and European dust standards resulting from this deficiency are discussed, and the need for revising the two directives accordingly is emphasized.     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

BACKGROUND, AIMS AND SCOPE: Chromium enters into the aquatic environment as a result of effluent discharge from steel works, electroplating, leather tanning industries and chemical industries. As the Cr(VI) is very harmful to living organisms, it should be quickly removed from the environment when it happens to be contaminated. Therefore, the aim of this laboratory research was to develop a rapid, simple and adaptable solvent extraction system to quantitatively remove Cr(VI) from polluted waters. METHODS: Aqueous salt-solutions containing Cr(VI) as CrO4(2-) at ppm level (4-6 ppm) were prepared. Equal volumes (5 ml) of aqueous and organic (2-PrOH) phases were mixed in a 10 ml centrifuge tube for 15 min, centrifuged and separated. Concentrations of Cr(VI), in both the aqueous and organic phases, were determined by atomic absorption spectrometry. The effects of salt and acid concentrations, and phase-contact time on the extraction of Cr(VI) were investigated. In addition, the extraction of Cr(VI) was assessed in the presence of tetramethylammonium chloride (TMAC) in 2-PrOH phase. Effects of some other metals, (Cd(II), Co(II), Cu(II), Ni(II) and Zn(II)), on the extraction of Cr(VI) were also investigated. RESULTS AND DISCUSSION: The Cr(VI) at ppm level was extracted quantitatively by salting-out the homogeneous system of water and 2-propanol(2-PrOH) using chloride salts, namely CaCl2 or NaCl, under acidic chloride media. The extracted chemical species of Cr(VI) was confirmed to be the CrO3Cl-. The ion-pair complex extracted into the organic phase was rationalized as the solvated ion-pair complex of [2-PrOH2+, CrO3Cl-]. The complex was no longer stable. It implied the reaction between extracted species. Studies revealed that salts and acid directly participated in the formation of the above complex. Use of extracting agents (TMAC) didn't show any significant effect on the extraction of Cr(VI) under high salting-out conditions. There is no significant interference effect on the extraction of Cr(VI) by the presence of other metals. The Cr(VI) in the organic phase was back-extracted using an aqueous ammonia solution (1.6 mol dm(-3)) containing 3 mol dm(-3) NaCl. The extraction mechanism of Cr(VI) is also discussed. CONCLUSIONS: Salting-out of homogeneous mixed solvent of 2-propanol can be employed to extract Cr(VI) quantitatively, as an ion-pair of [2-PrOH2+ * CrO3Cl-] solvated by 2-PrOH molecules. Then, the complex becomes 'solvent-like' and is readily separated into the organic phase. The increase of Cl- ion concentration in the aqueous phase favors the extraction. The 2-PrOH, salts and acid play important roles in the extraction process. There is no need to use an extracting agent at a high salting-out condition. RECOMMENDATIONS AND PERSPECTIVES: Chromium(VI) must be quickly removed before it enters into the natural cycle. As the 2-PrOH is water-miscible in any proportion, ion-pairing between 2-PrOH2+ and CrO3Cl- becomes very fast. As a result, Cr(VI) can easily be extracted. Therefore, the method is recommended as a simple, rapid and adaptable method to quickly separate Cr(VI) from aqueous samples.     

Land Cover Changes as a Result of Environmental Restrictions on Nitrate Leaching in Dairy Farming

Nitrate leaching forms an important environmental problem because it causes pollution of groundwater and surface water, and adds to already problematic eutrophication. This study analyses the impact of reductions in nitrate leaching on land cover decisions of dairy farms, of which the activities make an important contribution to nitrate leaching. As the level of nitrate leaching depends on groundwater depth as well as on the supply of nitrogen, spatial variation in groundwater levels will cause a spatial variation in land cover under restrictions on nitrate leaching. A non-linear partial optimisation model for the economic and ecological aspects of the problem were used to show how land cover and dairy farms' financial balances change when nitrate losses are reduced. The model is spatially explicit, and describes nitrate leakage and yields of maize and grass as a function of groundwater depth, including the effects of various grazing systems. The model analyses the decisions of a risk neutral agent who minimises costs under the following constraints: (i) production, feed requirements and mass balances for fodder; (ii) constraints for nitrate leaching. Economic costs are attributed to increased costs of fodder and processing of manure when nitrate restrictions are tightened. An important result of the study is the variation in compliance costs and land cover for maize and grass production brought about by spatial variation in groundwater depth. While the effects are negligible for some shallow groundwater classes, it is extremely difficult in other classes – if not impossible – to obtain the EU standard of maximum admissible losses of 34 kg N ha^–1 at low costs. The study shows an important reduction in land cover by maize.     

Suborganismic and organismic effects of aldicarb and its metabolite aldicarb-sulfoxide to the zebrafish embryo (Danio rerio)

The new European chemical regulation (REACH) requires a short-term fish test for chemicals where the level of production exceeds 10tons per year. For ethical reasons (3R-concept), an alternative to the acute fish test should be introduced to decrease the number of animal testing with fish. The zebrafish embryo (Danio rerio) test became a valuable tool in ecotoxicology and already replaces the acute fish test for the evaluation of wastewater in Germany. Recent efforts are targeted to use this and other fish embryo tests for the effect assessment of chemicals. The toxic effects of the carbamate insecticide aldicarb and its metabolite aldicarb-sulfoxide to zebrafish embryos were analysed using two approaches with different endpoints. Organismic tests were conducted with zebrafish embryos exposed to the pesticides for 48h. In addition, suborganismic effects were examined analysing the enzyme inhibition of cholinesterases and carboxylesterases. On the organismic level, the only sublethal effect seen was the increase of heart rate at low and decrease at higher concentration with the use of aldicarb-sulfoxide but not with aldicarb (concentration range 0.2-300microM). In contrast, analysis of enzyme inhibitions showed high to very high effects caused by the two carbamates. The enzyme inhibition analysis of whole homogenates of exposed embryos may be advantageous for toxicant screening (biomarker of exposure) and might be used to bridge the gap of sensitivity of the (48h old) zebrafish embryos to adult fish when exposed to anti-cholinesterase substances (biomarker of prospective effect).     

Morphological and functional responses of a metal-tolerant sunflower mutant line to a copper-contaminated soil series

Environmental Science and Pollution Research - The potential use of a metal-tolerant sunflower mutant line for biomonitoring Cu phytoavailability, Cu-induced soil phytotoxicity, and Cu...     

Calcite-seeded crystallization of calcium phosphate for phosphorus recovery

For phosphorus recovery from wastewater, the present paper aims at understanding the crystallization of calcium phosphate by using calcites (Juraperle and Coccolith) as seeds from hard water. Synthetic hard water with 60 mgCl(-1) carbonate and 10 mgPl(-1) phosphate was prepared and used in the batch experiments of calcite-seeded crystallization. The solution composition was measured throughout the batch crystallization process, and the corresponding saturation indices with respect to the minerals were calculated with PHREEQC Program. The surface of the calcite seeds was observed and measured with environmental scanning electron microscopy (ESEM), Fourier transform infrared (FTIR) and BET method. The studies show that both calcites are effective seeds for the crystallization of calcium phosphate from hard water; the used calcites are more efficient than the original ones because newly formed crystals with calcium phosphate have covered their surfaces. The studies show that the calcite seeds can be used for phosphorus recovery from hard waters.     

Physicochemical substance properties as indicators for unreliable exposure in microplate-based bioassays

In the last years many efforts were made to transform standardized algal test protocols into low-cost microplate assays. While advantages were pointed out frequently, limitations are not systematically addressed, thus hindering a widespread utilisation. In this study a group of organic substances with a wide distribution of volatility (log K_AW from −6.53 to −2.13) and lipophilicity (log K_OW from 1.26 to 4.92) was investigated with respect to the influence of these physicochemical properties on their algal toxicity in different assays. Therefore the EC₅₀ values were determined with a microplate assay based on ISO 8692 protocol and the results were compared with those of an established algal growth inhibition test conducted in air tight glass vessels. Using the ratio of the EC₅₀ values, a clear connection between biological response and volatility as well as lipophilicity of test substances could be detected. Chemicals with a log K_OW higher than 3 or a Henry coefficient log K_AW higher than −4 were identified as less effective in the microplate assay than in the comparative assay. The loss in nominal concentration due to physicochemical properties could be shown to contribute to this using HPLC analysis. Consequently, when using microplate assay’s one should be aware that lipophilic and volatile chemicals might be underestimated in their toxicity, which could be indicated from evaluating related physicochemical properties modelled from structural information prior to an experimental investigation.