Monitoring of Phenol in Wastewater Bioremediation by HPLC

Bioremediation emphasizes the detoxification and destruction of toxic substances by microorganisms. Wastewater obtained from an industrial concern was solvent extracted with methyl alcohol and dichloromethane and analysed by GC/MS. Besides phenol, a large variety of organic compounds were detected. Under controlled laboratory conditions, the wastewater was innoculated with a mixed culture of microorganisms specially selected for their abilities to degrade phenol. Samples were collected at regular intervals from the stirred tank bioreactor and analysed for phenol by reverse phase HPLC with a C18 column. Results shows that from an initial phenol concentration of 987 ppm, slightly more than 50% was destroyed within 163 hours. The dry weight of the microorganisms and the plate count (CFU/ml) shows a steady increase from 0.5238 gms to 0.5355 gms and from 1.1E+9 to 1.94E+13 respectively over the same period. This suggested that the phenol was consumed by the microorganisms as the sole carbon source.     

City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

Effects of different vermicompost extracts of palm oil mill effluent and palm-pressed fiber mixture on seed germination of mung bean and its relative toxicity

Several treatment technologies are available for the treatment of palm oil mill wastes. Vermicomposting is widely recognized as efficient, eco-friendly methods for converting organic waste materials to valuable products. This study evaluates the effect of different vermicompost extracts obtained from palm oil mill effluent (POME) and palm-pressed fiber (PPF) mixtures on the germination, growth, relative toxicity, and photosynthetic pigments of mung beans (Vigna radiata) plant. POME contains valuable nutrients and can be used as a liquid fertilizer for fertigation. Mung bean seeds were sown in petri dishes irrigated with different dilutions of vermicomposted POME-PPF extracts, namely 50, 60, and 70% at varying dilutions. Results showed that at lower dilutions, the vermicompost extracts showed favorable effects on seed germination, seedling growth, and total chlorophyll content in mung bean seedlings, but at higher dilutions, they showed inhibitory effects. The carotenoid contents also decreased with increased dilutions of POME-PPF. This study recommends that the extracts could serve as a good source of fertilizer for the germination and growth enhancement of mung bean seedlings at the recommended dilutions.     

Changes in polybrominated diphenyl ether (PBDE) levels in cooked food

Food surveys for levels of toxic chemicals frequently report the levels on an uncooked basis. It is known that cooking may in some conditions decrease the amount of dioxins and related chemicals in food. Surveys of polybrominated diphenyl ether (PBDE) levels in food to date show data from uncooked food only. In this article, it was shown that broiling, with fat dripped from the foods reported here, ground beef, ground lamb, catfish, trout, and salmon, reduces the amount of PBDEs in these foods. This suggests that calculations of food intake need to take into consideration levels in the cooked food rather than in the uncooked food.     

Designing a developed model for assessing the disaster induced vulnerability value in educational centers

To date, the models developed for assessing the vulnerability of societies have only taken account of the economic problems in the societies. Offering a model based on analytical hierarchy process and failure mode and effect analysis logic, the current study aims to determine the factors influencing the vulnerability of a higher education center and finally defines a vulnerability index. This model divides the factors influencing vulnerability into three categories: (1) the structure and layout of the buildings, (2) the occupants’ characteristics, (3) the controlling and warning systems. The academy community center of Science and Research Branch was assessed in terms of vulnerability. The findings indicated that the vulnerability value relating to various sections and university buildings was higher than the acceptable level which entailed the due attention of educational managers. The findings showed that if some parts of the educational and administrative buildings were used for laboratory as well as for the storage of hazardous and flammable materials, then the vulnerability value will be increased to 200. This highlights the impact that the type of buildings application has on the level of vulnerability. The study has been performed in the Science and Research Branch as an educational center in Tehran during 2009–2010.     

Simulating sulfadimidine transport in surface runoff and soil at the microplot and field scale

To prevent residues of veterinary medicinal products (VMPs) from contaminating surface waters and ground water, an environmental impact assessment is required before a new product is allowed on the market. Physically based simulation models are advocated for the calculation of predicted environmental concentrations at higher tiers of the assessment process. However, the validation status of potentially useful models is poor for VMP transport. The objective of this study was to evaluate the dual-permeability model MACRO for simulation of transport of sulfonamide antibiotics in surface runoff and soil. Special focus was on effects of solute application in liquid manure, which may alter the hydraulic properties at the soil surface. To this end we used data from a microplot runoff experiment and a field experiment, both conducted on the same clay loam soil prone to preferential flow. Results showed that the model could accurately simulate concentrations of sulfadimidine and the nonreactive tracer bromide in runoff and in soil from the microplot experiments. The use of posterior parameter distributions from calibrations using the microplot data resulted in poor simulations for the field data of total sulfadimidine losses. The poor results may be due to surface runoff being instantly transferred off the field in the model, whereas in reality re-infiltration may occur. The effects of the manure application were reflected in smaller total and micropore hydraulic conductivities compared with the application in aqueous solution. These effects could easily be accounted for in regulatory modeling.     

A contaminated site investigation: comparison of information gained from geophysical measurements and hydrogeological modeling

The investigation of contaminated sites is usually a long and expensive process. It is therefore desirable to use a combination of methodologies in an integrative approach that can reduce redundant information gathering. The objective of this study was to examine the usefulness of 2 non-intrusive exploration techniques in a contaminated site investigation. Borehole positioning based on geophysical measurements was compared to positioning based on the Bayesian expert system for flow-field modeling. The goal set at the field site was the assessment of the type and load of contaminants transported from the landfill site to the adjacent aquifer and the extent of leachate plumes within the groundwater. The two methods made different demands on information gathering and were found to be complementary. The geophysical approach focused attention on the waste compartments at the site and on mixing plumes in the adjacent aquifer but could not, without prior information, provided information on the flow field. The Bayesian approach to flow-field modeling determined areas of greatest model uncertainty at the model boundaries. The model highlighted areas of greatest uncertainty that might otherwise have been overlooked and provided information on the most likely mean direction of the leachate plumes. It was concluded that both methods contribute to a site investigation and should be used before additional drilling is carried out.     

Environmental Monitoring of Benzene and Alkylated Benzene from Vehicular Emissions

The volatile organic pollutants from direct vehicular exhaust were trapped with activated charcoal, desorbed with carbon disulphide and analysed by GC/MS with tert-butyl benzene as an internal standard. A comparative study was made from the exhaust of 1000 cc, 1300 cc, 1600 cc cars, pickup, lorry(diesel), 125 cc and 70 cc motorbikes. The level of pollutants emitted were in the following order, motorbike(petrol) car(petrol) pickup(petrol) lorry(diesel). The range of highest emission (125 cc motorbike) to the lowest emission (lorry(diesel)) was of the order of 102 for benzene, 6×102 for ethyl benzene, 5×102 for toluene and 3×102 for xylenes. Among cars, those fitted with catalytic convertors emitted a lower level of benzene (2 to 3 times) when compared with those without catalytic convertors. Similar studies on the air in air-conditioned buses, non air-conditioned buses and three metres from the edge of the road shows that they have the same pollutant level. The level of these pollutant as compared to those from direct car exhaust are of the order of 102 times less for benzene, xylene and toluene and 103 times less for ethylbenzene. The levels of benzene, toluene, ethylbenzene and xylenes by the road side and in the buses were found to be lower than the exposure limits of ACGIH, OSHA and EH40.