Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review

Environmental Chemistry Letters - The demand for lithium is growing rapidly with the increase in electric vehicles, batteries and electronic equipments. Lithium can be extracted from brines, yet...     

Adsorption of 17β-estradiol from aqueous solution by raw and direct/pre/post-KOH treated lotus seedpod biochar

Five biochars derived from lotus seedpod(LSP) were applied to examine and compare the adsorption capacity of 17β-estradiol(E2) from aqueous solution.The effect of KOH activation and the order of activation steps on material properties were discussed.The effect of contact time,initial concentration,p H,ionic strength and humic acid on E2 adsorption were investigated in a batch adsorption process.Experimental results demonstrated that the pseudo second-order model fitted the experimental data best and that adsorption equilibrium was reached within 20 hr.The efficiency of E2 removal increased with increasing E2 concentration and decreased with the increase of ionic strength.E2 adsorption on LSP-derived biochar(BCs) was influenced little by humic acid,and slightly affected by the solution p H when its value ranged from 4.0 to 9.0,but considerably affected at p H 10.0.Low environmental temperature is favorable for E2 adsorption.Chemisorption,π–π interactions,monolayer adsorption and electrostatic interaction are the possible adsorption mechanisms.Comparative studies indicated that KOH activation and the order of activation steps had significant impacts on the material.Post-treated biochar exhibited better adsorption capacity for E2 than direct treated,pretreated,and raw LSP biochar.Pyrolyzed biochar at higher temperature improved E2 removal.The excellent performance of BCs in removing E2 suggested that BCs have potential in E2 treatment and that the biochar directly treated by KOH would be a good choice for the treatment of E2 in aqueous solution,with its advantages of good efficiency and simple technology.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Chemical characteristics of road dust PM2.5 fraction in oasis cities at the margin of Tarim Basin

In order to understand the compositions characteristics of particulate matter with aerodynamic diameter less than 2.5 μm (PM_2.5) fraction in road dust (RD_2.5) of oasis cities on the edge of Tarim Basin, 30 road dust (RD) samples were collected in Kashi, Cele, and Yutian in the spring, 2018, and RD_2.5 was collected using the resuspension approach. Eight water-soluble ions, 39 trace elements and 8 fractions of carbon-containing species in PM_2.5 were analyzed. Ca²⁺ and Ca were the most abundant ions and elements in RD_2.5 (7.1% and 9.5%). Cl^- in RD_2.5 was affected not only by attributed to saline-alkali soils in oasis cities of the Tarim Basin and dust from Taklimakan Desert but also by human activities. Moreover, the organic carbon/elemental carbon (OC/EC) ratio indicated that carbon components in RD_2.5 in Cele town mainly come from fossil fuel combustion, while those in Yutian and Kashi mainly come from biomass combustion. It is noteworthy that high Ca in RD_2.5 was seriously affected by anthropogenic emissions, and high Na and K contents in RD_2.5 could be derived from soil and desert dust. It was estimated that Cd, Tl, Sn and Cr were emitted from anthropogenic emissions using the enrichment factor. The coefficients of divergence (COD) result indicated that the influence of local emission on road dust emission is greater than that of long-distance transmission. This study is the first time to comprehensively analyze the chemical characteristics of road dust in oasis cities, and the results provides the sources of road dust at the margin of Tarim Basin.     

Relationship between physicochemical properties and dewaterability of hydrothermal sludge derived from different source

Sewage sludge (SS) and deinking sludge (DS) were used to comparatively study the hydrothermal dewatering of sludge with different components. For a better overview, an insight into the relationship between physicochemical properties and dewaterability of hydrothermal sludge was provided. Results found that not all kinds of sludge were suitably conditioned by hydrothermal treatment (HT) in term of the elevation of dewaterability. Higher hydrothermal temperature tended to enhance the dewaterability of SS rather than DS, which was supported by the variation of their physicochemical properties (including water distribution, bonding energy, extracellular polymeric substance (EPS), particles size, acid functional groups and zeta potential in this study). In addition, the changes in surface morphology suggested that the reverse effect of HT on sludge dewaterability was mainly due to their dewatering behavior. For SS, the destruction of EPS structure leaded to the release of bound water, thereby strengthening sludge dewatering. Conversely, “Bridging effect” generated by lignocellulose in DS was beneficial for sludge dewatering; however, the increasing hydrothermal temperature degraded part of lignocellulose and weakened “bridging effect”, finally resulting in worse dewaterability of DS.     

复合型道路抑尘剂在城市道路中的应用及经济分析研究

采用由多种可降解高分子材料组成的新型复合型道路抑尘剂喷洒酒泉市肃州区道路,研究喷洒前后城市道路扬尘中PM_(10)、PM_(2.5)和氮氧化物的变化及抑尘剂所带来的经济效益。结果表明,PM_(10)平均去除率为20%,喷洒后能迅速捕捉并吸附微粒粉尘,加速粉尘颗粒凝聚,最好去除效果高达40%;对PM_(2.5)和氮氧化物的去除效果约15%,没有PM_(10)显著;相对于传统洒水方式,喷洒道路抑尘剂可以节省30%经济用水,且对人体和环境无毒害。     

大豆过敏原P34蛋白基因检测技术与环境污染的关系研究

环境污染易引起大豆种植区域出现过敏原P34蛋白基因变异情况,当前蛋白基因检测方法不能满足检测需求,提出基于探针引物的大豆过敏原P34蛋白基因荧光PCR定量检测技术,针对大豆过敏原特异性基因P34蛋白基因序列进行设计;通过DNA提取、浓度测定,荧光定量PCR检测,实现大豆过敏原P34蛋白基因检测。实验结果表明,所提方法能够准确检测出包括环境污染区域在内的大豆食品过敏原P34蛋白基因成分,具有很好的应用前景,满足市场监督检测的需要。     

环保新形势下的经济增长方式改革研究

为了均衡环保和经济增长间的关系,对环保压力下的经济增长方式进行改革。分析了资源与经济增长的关系、经济增长方式的内涵和经济增长方式的类型,介绍了国内外相关文献综述。对传统粗放型经济增长方式进行分析,发现其具有高投入、高消耗、低效益的特性,且中国单位产值所需的生产要素较其他发达国家和部分发展中国家高,但生产率与资金、资源利用率却比其他发达国家低。在面临环保压力时,中国因传统粗放型经济增长方式造成资源利用效率降低,影响经济增长,需对经济增长方式做出以下改革:转变生产函数,增加要素生产率,改变要素间相对地位;扩展价值链,使产业升级,提高附加值;改善产业结构,发展服务业。     

如何促进旅游业与生态环境耦合协调发展研究

对于正处于发展中状态的中国来说,旅游行业是国民经济发展主导性力量之一,并且越来越多旅游资源得到了极大开发利用,为提高当地经济水平起到了奠定性作用。然而基于调查却发现在此期间也存在着一些问题,如部分地区在进行旅游规划设计时过于强调经济效益,明确缺乏生态环境保护意识,再加上资源具有不可再生特点,极容易为生态环境发展带来不利影响,因而这就需要相关人员能够充分引起自身对该方面内容重视程度,促使旅游业与生态环境实现耦合协调发展。