The evolving trends of landfill leachate treatment research over the past 45 years

Environmental Science and Pollution Research - Landfilling is one of the most prevalent waste management strategies on a global scale. However, one major drawback of landfills is the production of...     

Effects of long-term exposure to PM2.5 on years of life lost and expected life remaining in Ahvaz city,Iran (2008–2017)

Ambient air pollution is one of the most significant environmental problems, and many individuals around the world die each year prematurely from diseases caused by this type of pollution. PM_2.5 can transpire deep to the lungs and induce some dangerous health effects in humans. In this study, the health effects of long-term PM_2.5 were estimated on expected life remaining (ELR) and years of life lost (YLL) indices in Ahvaz city during the years 2008–2017 using the AirQ+ software developed by WHO. Values obtained from the PM_2.5 averaging, ELR, and YLL data were processed for the whole population in the age range of 0–64 and over 64. These values were entered into AirQ+ software. The mean annual concentration of PM_2.5 was highly variable, with the highest concentration being 70.72 μg/m³ in 2010 and the lowest 41.97 μg/m³ in 2014. In all studied years, the concentration of PM_2.5 with the variations between 4.2 to 7.07 times was higher than the WHO standard (10 μg/m³). Ahvaz city also did not experience any clean day during the 10-year period, and in 2010, there were 47 very unhealthy days and 27 dangerous days, i.e., the highest number of very unhealthy and dangerous days during the period. The results estimated that the highest and lowest YLL in the next 10 years for all ages groups would be 137,760.49 (2010) and 5035.52 (2014), respectively. Also, the ELR index was lower than the Iranian standard and EPA which was significantly correlated with the concentration of PM_2.5.

     

Wood Plastic Composite Panels: Influence of the Species,Formulation Variables and Blending Process on the Density and Withdrawal Strength of Fasteners

In this work, the influence of four variable parameters including fiber types (poplar and rice straw), fiber contents (45, 60, and 75 wt%), fiber sizes (20–40 and 40–60 mesh), and blending methods (hot-pressing and extrusion) on the physico-mechanical properties of wood plastic composite panels were studied. Generally, the results showed that each of the above-mentioned parameters had significant effect on the nail and screw withdrawal strength (pull-out load) and density, whereas their interactions did not have highly impressive effects on the properties. All tested properties vary significantly with fiber origin. Composites filled with larger fiber size, produced panels with higher withdrawal strength and density. The effect of blending method on density was maximal. Withdrawal strength values of each sample decreased with increase in fiber loading. The lowest withdrawal strength values of nail and screw were obtained from the samples filled with rice straw. It was found that strength properties of the composites can be improved moderately by adding 45 wt% fiber, 20–40 mesh particle and poplar flour. According to the results, the blending method is a significant variable in the determination of withdrawal strength. Therefore, the blending method can be recommended based on the end product applications.     

The evaluation of electrical energy per order (E(Eo)) for photooxidative decolorization of four textile dye solutions by the kinetic model

Photooxidative decolorization of four textile dyestuffs, C.I. Acid Orange 7 (AO7), C.I. Acid Orange 8 (AO8), C.I. Acid Orange 52 (AO52) and C.I. Acid Blue 74 (AB74), by UV/H2O2 was investigated in a laboratory scale photoreactor equipped with a 15 W low pressure mercury vapour lamp. The decolorization of the dyes was found to follow pseudo-first-order kinetics, and hence the figure-of-merit electrical energy per order (E(Eo)) is appropriate for estimating the electrical energy efficiency. The E(Eo) values were found to depend on the concentration of H2O2, concentration and basic structure of the dye. This study shows that these textile dyes can be treated easily and effectively with the UV/H2O2 process with E(Eo) values between 0.4 and 5 kW h m-3 order-1, depending on the initial concentrations of dyes and H2O2. The kinetic model, based on the initial rates of degradation, provided good prediction of the E(Eo) values for a variety of conditions.     

Effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria: Soot-ceria contact and interfacial oxygen evolution

Ceria is widely used as a catalyst for soot combustion, but effects of Zr substitution on the reaction mechanism is ambiguous. The present work elucidates effects of Zr substitution on soot combustion over cubic fluorite-structured nanoceria. The nanostructured CeO₂, Ce_0.92Zr_0.08O₂, and Ce_0.84Zr_0.16O₂ composed of 5–6 nm crystallites display T_m-CO2 (the temperature at maximum CO₂ yield) at 383, 355, and 375°C under 10 vol.% O₂/N₂, respectively. The size of agglomerate decreases from 165.5 to 51.9–57.3 nm, which is beneficial for the soot-ceria contact. Moreover, Zr increases the amount of surface oxygen vacancies, generating more active oxygen (O₂^? and O^?) for soot oxidation. Thus, the activities of Ce_0.92Zr_0.08O₂ and Ce_0.84Zr_0.16O₂ in soot combustion are better than that of CeO₂. Although oxygen vacancies promote the migration of lattice O^2?, the enriched surface Zr also inhibits the mobility of lattice O^2?. Therefore, the T_m-CO2 of Ce_0.84Zr_0.16O₂ is higher than that of Ce_0.92Zr_0.08O₂. Based on reaction kinetic study, soot in direct contact with ceria preferentially decomposes with low activation energy, while the oxidation of isolated soot occurs through diffusion with high activation energy. The obtained findings provide new understanding on the soot combustion over nanoceria.     

The influence of association of plant growth-promoting rhizobacteria and zero-valent iron nanoparticles on removal of antimony from soil by Trifolium repens

Using association of plants, nanomaterials, and plant growth-promoting bacteria (PGPR) is a novel approach in remediation of heavy metal-contaminated soils. Co-application of nanoscale zerovalent iron (nZVI) and PGPR to promote phytoremediation of Sb-contaminated soil was investigated in this study. Seedlings of Trifolium repens were exposed to different regimes of nZVI (0, 150, 300, 500, and 1000 mg/kg) and the PGPR, separately and in combination, to investigate the effects on plant growth, Sb uptake, and accumulation and physiological response of the plant in contaminated soil. Co-application of nZVI and PGPR had positive effects on plant establishment and growth in contaminated soil. Greater accumulation of Sb in the shoots compared to the roots of T. repens was observed in all treatments. Using nZVI significantly increased accumulation capacity of T. repens for Sb with the greatest accumulation capacity of 3896.4 μg per pot gained in the “PGPR+500 mg/kg nZVI” treatment. Adverse impacts of using 1000 mg/kg nZVI were found on plant growth and phytoremediation performance. Significant beneficial effect of integrated use of nZVI and PGPR on plant photosynthesis was detected. Co-application of nZVI and PGPR could reduce the required amounts of nZVI for successful phytoremediation of metalloid polluted soils. Intelligent uses of plants in accompany with nanomaterials and PGPR have great application prospects in removal of antimony from soil.

     

The interactions of Cr (VI) concentrations and amendments (biochar and manure) on growth and metal accumulation of two species of Salicornia in contaminated soil

Environmental Science and Pollution Research - Heavy metals are among the most dangerous contaminants in the environment. Organic components and plant species that can accumulate and stabilize...     

Multiple dimensions of work-related risk factors and their relationship to work ability among industrial workers in Iran

Objectives. The present study was designed to investigate the simultaneous effects of physical, psychosocial and other work-related risk factors on the work ability index (WAI) score among industrial workers. Methods. This study used a cross-sectional design with a questionnaire survey. A total of 280 workers were included in the study. Data were collected using three questionnaires including the Persian version of the WAI, the Persian version of the job content questionnaire and an author-developed measure (to assess work-related factors, health-related factors and socio-demographic characteristics). Results. The majority of the participants were young, but they had poor WAI scores (mean 37.3?±?6.4) and 44.3% of them had poor or moderate work ability. Occupational accidents and injuries were found to be the strongest predictors of WAI scores. Additionally, there was a strong association between WAI scores and supervisor support, skill discretion, occupational training, sleep quality, work nature and educational level. Conclusions. Intervention programs should focus on improving supervisor support, sleep quality, job skills and knowledge and on decreasing physical and mental work demands. Additionally, implementing a comprehensive occupational health and ergonomics program for controlling and reducing hazardous working environments and occupational injury rates should be considered.