Imidacloprid induced alterations in oxidative stress,biochemical, genotoxic,and immunotoxic biomarkers in non-mammalian model organism Galleria mellonella L. (Lepidoptera: Pyralidae)

Imidacloprid (IMI), a neonicotinoid insecticide, is widely used to control pests in agriculture. We investigated the changes in antioxidant enzyme activities, lipid peroxidation levels, biochemical effects, genotoxic effect, and immunotoxic effect of sublethal doses (0.25, 0.50, 0.75, and 1.00?µg) of IMI at different time periods (24, 48, 72, and 96?h) on a model organism, Galleria mellonella L. The results indicated that there were dose-dependent increases in both antioxidant enzyme activities (SOD and CAT) and MDA levels. Protein content was not affected by IMI at 24th and 48th, whereas it was decreased by the highest dose of IMI (1.00?µg) at 72nd and 96th h. Lipid and carbohydrate contents were reduced with increasing doses of IMI. Micronucleus frequency significantly increased in all IMI doses. All IMI doses caused a significant decrease in THC at 24th, 48th, and 72nd h. Our results can help to illustrate the effects of IMI in target organisms and indirectly may aid to discover potential risk of it on nontarget organisms. Future studies, at molecular levels, will be helpful in understanding the mechanism of action of IMI on these biomarkers.     

Mitigation of odor causing emissions—Bench-scale investigation

Emissions of malodors are considered to be the greatest threat to the compost industry. In work presented here, several simple odor mitigation alternatives were investigated for their effectiveness in preventing the release of common odorants, such as terpenes, ammonia, and reduced sulfur compounds. The mitigation methods studied included the use of a blanket of finished compost, compost amendment mixed within the feedstock, odor neutralizing agents (ONAs), and oxygen release compounds (ORCs). Among the mitigation alternatives investigated in this study, the use of finished compost as a blanket and finished compost as an amendment yielded the most conclusive and significant results. Both of these alternatives yielded a substantial emission reduction for terpenes, ammonia, and reduced sulfur compounds. The application of finished compost blanket resulted in up to 95% reduction of terpene and 25% reduction of ammonia emissions. Blending the feedstock with finished compost also provided substantial reduction of terpene emissions ranging from 73.6 to 93.1% at the 24% blending ratio, and up to 85% ammonia reduction a the 35% blending ratio. Use of finished compost also provided 75% lower reduced sulfur compound emissions at the 12% blending ratio. Misting and application of odor neutralizing agents did not result in any consistent reduction in emissions for any of the odorous compounds tested.

Implications The odor emissions from composting are often considered to be the biggest threat to composting facilities. Because most facilities cannot afford enclosures and contained composting vessels, there is a need to inexpensively and effectively control the odor emissions from composting facilities. The findings of this research can lead the way for efforts to control odor easily and cost effectively. In fact, the application of a compost blanket for odor control is already gaining acceptance by the composting industry.     

Biohythane production from pineapple peel using Methanosarcina mazei enhanced with palm oil mill effluent (POME) sludge in single-stage anaerobic digestion

Biohythane production via single-stage anaerobic digestion (AD) is an effective way for sustainable energy recovery from lignocellulosic biomass. In this paper, biohythane was produced through the AD process from pineapple peel waste substrate using purely cultured Methanosarcina mazei with the enhancement of palm oil mill effluent (POME) sludge as the inoculum. This study focuses on the effects of the lignocellulosic pre-treatment method, the addition of POME sludge into M. mazei culture medium as inoculum, and various operational conditions (food to microorganisms (F/M) ratios, temperature, pH) on gas production performances. The experimental results indicate that these parameters influenced the efficiency of biohythane production by producing the peak maximum biohythane production rate values (HPR_max) and (MPR_max), H₂:CH₄ = 1.93:0.67 L/L-d, and biohythane yield (HY) and (MY), H₂:CH₄ = 1.18:0.55 mL/L-substrate. This study demonstrates that biohythane gas (H₂ + CH₄ + CO₂) production from pineapple waste can be accelerated by M. mazei only with the enhancement of POME sludge through single-stage AD system under mesophilic batch process conditions.     

Utilization of sepiolite materials as a bottom liner material in solid waste landfills

Landfill bottom liners are generally constructed with natural clay soils due to their high strength and low hydraulic conductivity characteristics. However, in recent years it is increasingly difficult to find locally available clay soils that satisfy the required engineering properties. Fine grained soils such as sepiolite and zeolite may be used as alternative materials in the constructions of landfill bottom liners. A study was conducted to investigate the feasibility of using natural clay rich in kaolinite, sepiolite, zeolite, and their mixtures as a bottom liner material. Unconfined compression tests, swell tests, hydraulic conductivity tests, batch and column adsorption tests were performed on each type of soil and sepiolite–zeolite mixtures. The results of the current study indicate that sepiolite is the dominant material that affects both the geomechanical and geoenvironmental properties of these alternative liners. An increase in sepiolite content in the sepiolite–zeolite mixtures increased the strength, swelling potential and metal adsorption capacities of the soil mixtures. Moreover, hydraulic conductivity of the mixtures decreased significantly with the addition of sepiolite. The utilization of sepiolite–zeolite materials as a bottom liner material allowed for thinner liners with some reduction in construction costs compared to use of a kaolinite-rich clay.     

Comparison of fecal coliform bacteria before and after wastewater treatment plant in the Izmir Bay (Eastern Aegean Sea)

The distribution of fecal coliforms was investigated and determined in Izmir Bay from 1996 to 2005. Izmir Bay severely was polluted from industrial and domestic discharges during decades. In early 2000, a wastewater treatment plant began to treat domestic and industrial wastes. This plant treats the wastes about 80% capacity after 2001. The sampling periods cover before and after treatment plant. Assessment method for determining the number of fecal coliform has evolved membrane filtrations. Maximum surface fecal coliform concentration was 4.9 × 10⁵ cfu 100 ml^???1 in 1996–2000 period. Following the opening treatment system, fecal coliform density decreased 2.1 × 10⁴ cfu 100 ml^???1 during 2001–2005. A continuous improvement can be sustained in the water quality if direct inflow of untreated wastewater is prevented.     

Solid-phase extraction of Mn(II) and slurry analysis of the sorbent by electrothermal atomic absorption spectrometry

In this study, a challenging preconcentration/separation method based on the sorption of manganese on ethylene glycol dimethacrylatemethacrylic acid copolymer (EGDMA-MA) treated with ammonium pyrrolidine dithiocarbamate (APDC) and its slurry analysis by electrothermal atomic absorption spectrometry was described. Optimum conditions for quantitative sorption, as well as for preparing a homogeneous and stable slurry were investigated. A 100-fold enrichment factor could be reached. The analyte element in certified sea-water and bovine-liver samples were determined in the range of 95% confidence level. The proposed technique is fast, simple, and the risk of contamination is low. The limit of detection of the method for manganese in the slurry of the blank subjected to the proposed procedure was 0.07 μg L^?1 (3δ, N:10) corresponding to 0.56 μg kg^?1 slurry.     

Twin–twin transfusion syndrome: mathematical modelling

Twin–twin transfusion syndrome (TTTS) represents a pregnancy complication with a high risk for perinatal mortality and postnatal morbidity. Mathematical models have been utilized to examine the mechanisms of disease and potential treatment modalities. We developed four consecutive models based on pathophysiology mechanisms. Conceptually, these models remained simple, but with increased complexity in details. We present our models tutorially with the necessary equations expressed in words. The aetiology of TTTS was related to AV anastomoses from donor to recipient and their growth commensurate with placental growth. We assessed that natural growth of placenta and foetuses causes the diameter and length of the AV, as well as the AV's pressure gradient, to increase proportional to gestational age. The AV transfusion then increases faster than natural foetal growth. A progressively increasing discordance subsequently develops, not compensated for by foetal growth. A simulation is performed to show how this discordance in blood volumetric development causes successive discordances in other functions, particularly renal, circulatory, and cardio-vascular, resulting in disease progression to the various stages of TTTS. In conclusion, mathematical modelling of TTTS has provided an understanding of the sequence of events that leads to the various presentations of TTTS stages as well as the efficacy of therapies. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of zinc oxide nanoparticles on the trace element contents of soils

In the last few decades, metal oxide nanoparticles have shown impact in various areas, and such an impact causes an increased release in a different environment like soil, water, or air. A limited number of studies on soils showed that the biochemical parameters were affected by the metal oxide nanoparticles. However, the influence of metal oxide nanoparticles on soil elements has not been investigated. For this aim, zinc oxide nanoparticles were applied to two different soils; also, the effect of planting on soil elements was investigated via the cultivation of various plants roots (taproots, fibrous, bulb). Soils were treated with zinc oxide nanoparticles at 0, 1.0 and 20.0?mg during 4 weeks. Then, surface soil samples were collected and digested using an acid digestion procedure. Some biochemically important elements (Ca, Zn, Mg, Fe, Al, Cu, Co, Ni) were determined using a microwave plasma atomic emission spectrometer. The effect of time and dose-dependent zinc oxide nanoparticles on the element contents of different soils was investigated during planting, and the results were statistically evaluated.