Evaluation of a fast wastewater odour characterisation procedure using a chemical sensor array

Sewage treatment works are one of the major sources that cause atmospheric odour pollution. The increase in the number of complaints about odour nuisance is due to the increase in environmental concerns. Unfortunately, the legislation on odour nuisance from sewage treatment works is very limited. In order to determine suitable thresholds on which to base legal standards, reliable and efficient odour measurement methods need to be defined. A chemical sensor array was developed for the purpose of measuring wastewater odour. This paper describes the development of the chemical sensor system which is specifically tuned to odours of wastewater origin and which can give an electronic measure of the wastewater odours. Odour emissions from a wastewater treatment facility were detected by using a quartz crystal microbalance (QCM) sensor array. The array consists of nine sensor elements, which were coated with different materials. In this paper, the usage of these novel instruments in the water industry was shown.     

Simultaneous biological removal of endosulfan (alpha+beta) and nitrates from drinking waters using wheat straw as substrate

Nitrate and endosulfan (alpha+beta) removal was studied in an upflow biological denitrification reactor packed with wheat straw as carbon source and support particles for microorganisms. While almost complete nitrate elimination and between 65% and 70% endosulfan (alpha+beta) elimination occurred when the temperature was higher than 20 degrees C; below that value, nitrate removal efficiency decreased to about 10%. Nitrate, dissolved organic carbon (DOC), and endosulfan (alpha+beta) removal efficiencies decreased considerably at 1500 microg/l endosulfan concentration in the batch experiments. Although a high removal efficiency was observed for endosulfan (alpha+beta) and nitrate in the biological denitrification continuous reactor, the effluent water could not be used for drinking purpose because of the unacceptable levels of endosulfan (alpha+beta), colour and dissolved organic content. During the continuous study, 23.4% of the initial weight of wheat straw was lost and 24 g was consumed per gram of nitrogen removed. The results of the continuous study showed that 21.3% of the endosulfan removal was achieved by adsorption onto the wheat straw and 68.2% of the endosulfan removal occurred by biological activity and the remaining portion was detected in the effluent water.     

Synthesis of Polylactide-b-Poly (Dimethyl Siloxane) Block Copolymers and Their Blends with Pure Polylactide

The synthesis of polylactide (PLA)-b-poly (dimethyl siloxane) (PDMS) linear block copolymers and their use in blends with pure-PLA are described. PLA-b-PDMS linear block copolymers were obtained by the transesterification reaction in chloroform solution between poly(dimethyl siloxane) bis (2-aminopropyl ether) (molecular weight 2,000?Da) with PLA in the presence of stannous octoate. Molecular weights (Mw) of the block copolymers were varied from 53,800 to 63,600?Da while that of pristine PLA was 73,600?Da. The copolymers obtained were purified by fractional precipitation and then characterized by ¹H NMR, FTIR, GPC, viscometry and DSC techniques. Blends of pure PLA with PLA-b-PDMS block copolymers displayed improved elastic properties (elongation up to 140%) compared to pure PLA (elongation ~9%). Thermal, mechanical and morphological characterization of the blends were also conducted.     

The seasonal distribution of heavy metals in Mussel sample from Yalova in the Marmara Sea, 2008�C2009

Concentration of the some heavy metals (Co, Cu, Fe, Ni, Pb and Zn) Mediterranean mussel Mytilus galloprovincialis from Yalova (Marmara Sea) were investigated seasonally. The mean concentrations of Co, Cu, Fe, Ni, Pb and Zn in the soft tissues were 4.08 ± 0.67, 5.54 ± 0.59, 156.72 ± 20.18, 3.71 ± 1.14, 2.92 ± 0.51 and 106.23 ± 5.66 mg kg(?-1) dry weights, respectively. There were no significant differences between the metal concentrations among the seasons (P > 0.05). The mean Pb and Zn concentrations were higher than the acceptable limit proposed by International Turkish standards.     

Debriefing with teachers after the Marmara earthquake: an evaluation study1

The aim of this study was to evaluate the effectiveness of the debriefing meetings conducted after the 1999 earthquakes in Marmara, Turkey. The sample consisted of 265 teachers, 223 of whom attended the debriefing meetings. The personal satisfaction ratings of the teachers who attended the meetings revealed that they found the sessions satisfactory. The results of the comparison between those who reported that they benefited from the meetings and those who felt they did not indicated that the first group had lower scores on all of the psychopathology measures. A comparison between 42 teachers who did not attend the meetings and a randomly chosen group of 45 teachers who did attend revealed that the two groups differed significantly in terms of their post‐traumatic stress symptom scores. The findings of the study suggest that, in general, the teachers' debriefing sessions were satisfactory.     

Influence of different processing techniques on the mechanical properties of used tires in embankment construction

Use of the processed used tires in embankment construction is becoming an accepted way of beneficially recycling scrap tires due to shortages of natural mineral resources and increasing waste disposal costs. Using these used tires in construction requires an awareness of the properties and the limitations associated with their use. The main objective of this paper is to assess the different processing techniques on the mechanical properties of used tires–sand mixtures to improve the engineering properties of the available soil. In the first part, a literature study on the mechanical properties of the processed used tires such as tire shreds, tire chips, tire buffings and their mixtures with sand are summarized. In the second part, large-scale direct shear tests are performed to evaluate shear strength of tire crumb–sand mixtures where information is not readily available in the literature. The test results with tire crumb were compared with the other processed used tire–sand mixtures. Sand–used tire mixtures have higher shear strength than that of the sand alone and the shear strength parameters depend on the processing conditions of used tires. Three factors are found to significantly affect the mechanical properties: normal stress, processing techniques, and the used tire content.     

Heavy metals in water and in tissues of himri (Carasobarbus luteus) from Orontes (Asi) River, Turkey

Concentrations of heavy metals (Ag, Cd, Cr, Cu, Fe, Ni, Pb ve Zn) were measured in running water and in tissues (muscle, liver, gill, skin and gonads) of one commercially valuable fish species (Carasobarbus luteus) from the Orontes (Asi) River (Güzelburç region) in Hatay (Southeastern Turkey). Results for levels in water compared with national and international water quality guidelines were found at the highest concentrations in international criteria’s WHO, EC and EPA, but Cd, Cu, Ni and Pb were found to exceed permissible level of drinking water in national criteria TSE-266 whereas Fe, Zn and Cr concentrations were within the permissible levels for drinking. The present study showed a significant seasonal variation (p?p?>?0.05), which showed seasonal variation of only Zn (p?C. luteus were below the permissible limit for human consumption, level of Cu being very close to the permissible limit. Consequently, continuous monitoring of heavy metal concentration in edible freshwater fish will be needed in Orontes River.     

Kinetic of carbonaceous substrate in an upflow anaerobic sludge sludge blanket (UASB) reactor treating 2,4 dichlorophenol (2,4 DCP)

The performance of an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 dichlorophenol (2,4 DCP) was evaluated at different hydraulic retention times (HRTs) using synthetic wastewater in order to obtain the growth substrate (glucose-COD) and 2,4 DCP removal kinetics. Treatment efficiencies of the UASB reactor were investigated at different hydraulic retention times (2-20 h) corresponding to a food to mass (F/M) ratio of 1.2-1.92 g-COD g(-1) VSS day(-1). A total of 65-83% COD removal efficiencies were obtained at HRTs of 2-20 h. In all, 83% and 99% 2,4 DCP removals were achieved at the same HRTs in the UASB reactor. Conventional Monod, Grau Second-order and Modified Stover-Kincannon models were applied to determine the substrate removal kinetics of the UASB reactor. The experimental data obtained from the kinetic models showed that the Monod kinetic model is more appropriate for correlating the substrate removals compared to the other models for the UASB reactor. The maximum specific substrate utilization rate (k) (mg-COD mg(-1) SS day(-1)), half-velocity concentration (K(s)) (mg COD l(-1)), growth yield coefficient (Y) (mg mg(-1)) and bacterial decay coefficient (b) (day(-1)) were 0.954 mg-COD mg(-1) SS day(-1), 560.29 mg-COD l(-1), 0.78 mg-SS g(-1)-COD, 0.093 day(-1) in the Conventional Monod kinetic model. The second-order kinetic coefficient (k(2)) was calculated as 0.26 day(-1) in the Grau reaction kinetic model. The maximum COD removal rate constant (U(max)) and saturation value (K(B)) were calculated as 7.502 mg CODl(-1)day(-1) and 34.56 mg l(-1)day(-1) in the Modified Stover-Kincannon Model. The (k)(mg-2,4 DCP mg(-1) SS day(-1)), (K(s)) (mg 2,4 DCPl(-1)), (Y) (mg SS mg(-1) 2,4 DCP) and (k(d)) (day(-1)) were 0.0041 mg-2,4 DCP mg(-1) SS day(-1), 2.06 mg-COD l(-1), 0.0017 mg-SS mg(-1) 2,4 DCP and 3.1 x 10(-5) day(-1) in the Conventional Monod kinetic model for 2,4 DCP degradation. The second-order kinetic coefficient (k(2)) was calculated as 0.30 day(-1) in the Grau reaction kinetic model. The maximum 2,4 DCP removal rate constant (U(max)) and saturation value (K(B)) were calculated as 0.01 mg COD l(-1) day(-1) and 9.8 x 10(-3) mg l(-1) day(-1) in the Modified Stover-Kincannon model.     

Real-Time PCR Detection of Norovirus in Mussels Collected from the Bosphorus in Istanbul,Turkey

Norovirus (NoV) is recognised as one of the most common causes of foodborne infections, and shellfish are a well-documented source of this virus. The presence of NoV in shellfish has not previously been investigated in Turkey, and hence the aim of this study was to determine the frequency of human NoV genogroups I and II in mussels collected from the Bosphorus, Istanbul, Turkey. A total of 320 mussels representing 110 samples originating along the Bosphorus coast were collected from fish distributors. RNA was extracted using the RNeasy Mini Kit and real-time RT–PCR performed using primers specific for NoV genogroup I and II. Amongst the 110 samples, 5 (4.5%) were found to be positive for NoV genogroup II by SYBR Green assay; no genogroup I was detected. A positive signal was obtained by SYBR Green for NoV Genogroup II in mussels collected in October, November and December 2008, and February and July 2009. Only four out of five SYBR Green positive samples could be confirmed by the use of a NoV GII probe-based real-time RT–PCR. The average count and SD of Enterobactericaeae, E. coli and sulphide reductase anaerobic bacteria in PCR positive mussels were 3.56 log ± 0.96 log, 2.32 log ± 0.77 log and 1.70 log ± 0.56 log, respectively. This study shows that NoV Genogroup II is present in mussels collected from the Bosphorus, Istanbul, and may constitute a risk to human health.