Performance analysis of a biogas operated porous radiant burner for domestic cooking application

Environmental Science and Pollution Research - In this paper, the combustion characteristics of biogas in a Porous Radiant Burner (PRBBG) designed for domestic cooking appliances are presented....     

Physicochemical parameters aid microbial community? A case study from marine recreational beaches,Southern India

A total of 176 (water and sediment) samples from 22 stations belonging to four different (urban, semi-urban, rural, and holy places) human habitations of Tamil Nadu beaches were collected and analyzed for physiochemical and microbial parameters during 2008–2009. Bacterial counts were two- to tenfold higher in sediments than in water due to strong bacterial aggregations by dynamic flocculation and rich organic content. The elevated bacterial communities during the monsoon explain rainfalls and several other wastes from inlands. Coliform counts drastically increased at holy and urban places due to pilgrimage and other ritual activities. Higher values of the pollution index (PI) ratio (>1) reveals, human fecal pollutions affect the water quality. The averaged PI ratio shows a substantial higher microbial contamination in holy places than in urban areas and the order of decreasing PI ratios observed were: holy places?>?urban areas?>?semi-urban areas?>?rural areas. Correlation and factor analysis proves microbial communities were not related to physicochemical parameters. Principal component analysis indicates 55.32 % of the total variance resulted from human/animal fecal matters and sewage contaminants whereas 19.95 % were related to organic contents and waste materials from the rivers. More than 80 % of the samples showed a higher fecal coliform and Streptococci by crossing the World Health Organization's permissible limits.     

Treatment of phenol-containing wastewater by photoelectro-Fenton method using supported nanoscale zero-valent iron

This study presents the degradation of phenol by the photoelectro-Fenton method using nano zero-valent iron (nZVI) immobilized in polyvinyl alcohol–alginate beads. The effect of nZVI loading, H₂O₂ concentration, pH, and initial phenol concentration on phenol degradation and chemical oxygen demand reduction was studied. The scanning electron microscope images of the nZVI beads were used to analyze their morphology, and their diameters were in the range of 500–600 μm. The concentration of nZVI in the beads was varied from 0.1 to 0.6 g/L. Fe²⁺ leakage of 1 and 3 % was observed with 0.5 and 0.6 g/L of nZVI, respectively, and the observed beads' fracture frequency was 2 %, which confirmed the stability of the beads. The optimum operating conditions that arrived for better degradation were 0.5 g/L of nZVI, pH 6.2, and 400 mg H₂O₂/L. The treatment of effluent by this method increased the biodegradability index of the effluent, and the degradation data were found to follow pseudo first-order kinetics.     

Simultaneous Cr(VI) reduction and phenol degradation using Stenotrophomonas sp. isolated from tannery effluent contaminated soil

This study presents simultaneous hexavalent chromium (Cr(VI)) reduction and phenol degradation using Stenotrophomonas sp., isolated from tannery effluent contaminated soil. Phenol was used as the sole carbon and energy source for Cr(VI) reduction. The optimization of different operating parameters was done using Placket–Burman design (PBD) and Box–Behnken design (BBD). The significant operating variables identified by PBD were initial Cr(VI) and phenol concentration, pH, temperature, and reaction time. These variables were optimized by a three-level BBD and the optimum initial Cr(VI) concentration, initial phenol concentration, pH, temperature, and reaction time obtained were 16.59 mg/l, 200.05 mg/l, 7.38, 31.96 °C and 4.07 days, respectively. Under the optimum conditions, 81.27 % Cr(VI) reduction and 100 % phenol degradation were observed experimentally. The results concluded that the Stenotrophomonas sp. could be used to decontaminate the effluents containing Cr(VI) and phenol effectively.     

Comparative analysis for the production of fatty acid alkyl esterase using whole cell biocatalyst and purified enzyme from Rhizopus oryzae on waste cooking oil (sunflower oil)

The petroleum fuel is nearing the line of extinction. Recent research and technology have provided promising outcomes to rely on biodiesel as the alternative and conventional source of fuel. The use of renewable source - vegetable oil constitutes the main stream of research. In this preliminary study, Waste Cooking Oil (WCO) was used as the substrate for biodiesel production. Lipase enzyme producing fungi Rhizopus oryzae 262 and commercially available pure lipase enzyme were used for comparative study in the production of Fatty Acid Alkyl Esters (FAAE). The whole cell (RO 262) and pure lipase enzyme (PE) were immobilized using calcium alginate beads. Calcium alginate was prepared by optimizing with different molar ratios of calcium chloride and different per cent sodium alginate. Entrapment immobilization was done for whole cell biocatalyst (WCB). PE was also immobilized by entrapment for the transesterification reaction. Seven different solvents - methanol, ethanol, n-propanol, n-butanol, iso-propanol, iso-butanol and iso-amyl alcohol were used as the acyl acceptors. The reaction parameters like temperature (30°C), molar ratio (1:3 - oil:solvent), reaction time (24 h), and amount of enzyme (10% mass ratio to oil) were also optimized for methanol alone. The same parameters were adopted for the other acyl acceptors too. Among the different acyl acceptors - methanol, whose reaction parameters were optimized showed maximum conversion of triglycerides to FAAE-94% with PE and 84% with WCB. On the whole, PE showed better catalytic converting ability with all the acyl acceptor compared to WCB. Gas chromatography analysis (GC) was done to determine the fatty acid composition of WCO (sunflower oil) and FAAE production with different acyl acceptors.     

A review on the potential of citrus waste for D-Limonene,pectin, and bioethanol production

Citrus peel waste is a valuable lignocellulosic feedstock for bioethanol production due to its richness in fermentable sugars and low lignin content. Citrus peel contains two major value-added products: d-limonene and pectin. d-Limonene is widely used in food, cosmetics, and pharmaceutical industries. However, it acts as a microbial growth inhibitor for yeast during the fermentation process and hence it has to be removed prior to fermentation. Pectin is used as thickening agent, gelling agent, and stabilizer in the food industry. Since pectin increases the viscosity of the fermentation medium and makes fermentation troublesome, it has to be either extracted or degraded into galacturonic acid using pectinase enzyme. Thus, the removal and recovery of both D-limonene and pectin from citrus peel are essential for better fermentation. For bioethanol production, pretreatment plays a crucial role in the utilization of citrus peels since the reduction of d-limonene concentration to less than 0.05% is necessary. This review solely describes the potential of citrus waste for value added products such as d-limonene and pectin and the production of bioethanol from citrus peel waste is discussed in detail.     

Experimental investigation on CO2 absorption and physicochemical characteristics of different carbon-loaded aqueous solvents

Environmental Science and Pollution Research - The anthropogenic carbon dioxide (CO2) denseness in the earth’s atmosphere is increasing day-to-day by combusting fossil fuels for power...     

Improving petroleum contaminated land remediation decision-making through the MCA weighting process

Internationally petroleum contamination is widespread, posing serious environmental risks including surface and groundwater contamination, thus remediation is essential. The implementation of remediation options is becoming more complex with the increasing influence of stakeholders on the outcome of decision-making processes. Acceptance of remediation schemes during implementation can be increased by involving stakeholders and the public in the decision-making stage. In petroleum remediation involving multiple stakeholders, Multicriteria Analysis has been employed due to its ability to incorporate the preferences of each stakeholder through weighting. The research focused on investigating ways to improve the weighting process. The study demonstrated the utility of SWING, and determined which type of participant and how many participants to include in the decision process, through the application of ELECTRE III and Weighted Summation. It was recommended that a mixture of stakeholders, the public and experts be involved. The total number of participants will be limited by the choice of participatory and weighting methods. The careful selection of participants, as well as the choice of participatory and weighting methods, can minimize the subjectivity involved in MCA weighting, thereby lending decisions in petroleum remediation greater legitimacy.