Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – II. Mass size distributions and gas-particle partitioning

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study gas-particle partitioning, aerosol mass size distributions and to explore the potential of a higher time resolution (4 h-sampling).In the particulate phase the mass median diameters of the PAHs were found almost exclusively in the accumulation mode (0.1–1.0 μm of size). These were larger for semivolatile PAHs than for non-volatile PAHs. Gas-particle partitioning of semivolatile PAHs was strongly influenced by temperature. The results suggest that the Junge–Pankow model is inadequate to explain the inter-species variation and another process must be significant for phase partitioning which is less temperature sensitive than adsorption. Care should be taken when interpreting slopes m of plots of the type log K_p = m log p_L⁰ + b based on 24 h means, as these are found sensitive to the time averaging, i.e. tend to be higher than when based on 12 h-mean samples.     

Electrochemical inactivation of cyanobacteria and microcystin degradation using a boron-doped diamond anode——A potential tool for cyanobacterial bloom control

Cyanobacterial blooms are global phenomena that can occur in calm and nutrient-rich(eutrophic) fresh and marine waters. Human exposure to cyanobacteria and their biologically active products is possible during water sports and various water activities, or by ingestion of contaminated water. Although the vast majority of harmful cyanobacterial products are confined to the interior of the cells, these are eventually released into the surrounding water following natural or artificially induced cell death. Electrochemical oxidation has been used here to damage cyanobacteria to halt their proliferation, and for microcystin degradation under in-vitro conditions. Partially spent Jaworski growth medium with no addition of supporting electrolytes was used. Electrochemical treatment resulted in the cyanobacterial loss of cell-buoyancy regulation, cell proliferation arrest, and eventual cell death. Microcystin degradation was studied separately in two basic modes of treatment: batch-wise flow, and constant flow, for electrolytic-cell exposure. Batch-wise exposure simulates treatment under environmental conditions, while constant flow is more appropriate for the study of boron-doped diamond electrode efficacy under laboratory conditions. The effectiveness of microcystin degradation was established using high-performance liquid chromatography–photodiode array detector analysis, while the biological activities of the products were estimated using a colorimetric protein phosphatase-1 inhibition assay. The results indicate potential for the application of electro-oxidation methods for the control of bloom events by taking advantage of specific intrinsic ecological characteristics of bloom-forming cyanobacteria. The applicability of the use of boron-doped diamond electrodes in remediation of water exposed to cyanobacteria bloom events is discussed.     

The toxicity of composted sediments from Mediterranean ports evaluated by several bioassays

This work investigates the ecotoxicological evaluation of contaminated dredged sediments from French Mediterranean navy harbour (A), commercial port (B) and two composite specimens (C) and (D) coming from the mixture of A and B with other port sediments. The toxicity of elutriates from these sediments is estimated using embryo-toxicity test, Microtox® solid phase test, LuminoTox, phytotoxicity tests and genotoxicity test. Bioassay responses are not clearly correlated with chemical contamination in the whole sediment and vary as a function of tested organisms. The highest contaminated samples (A and C) are almost always more toxic than the less contaminated samples (B and D). Among composite sediments, the mixture effect with other sediments is not efficient to decrease toxicity in sample C, suggesting that other parameters influence toxicity level such as particle size or organic matter content. These parameters should be taken into consideration in order to improve the efficiency of the mixture process and produce composite sediments with low toxicity.     

Accumulation of organochlorine contaminants in loggerhead sea turtles, Caretta caretta, from the eastern Adriatic Sea

We analyzed 15 polychlorinated biphenyls (PCBs) and five organochlorine pesticides (OCPs) in fat tissue of 27 loggerhead sea turtles (Caretta caretta) from eastern Adriatic Sea with the curved carapace length ranging from 25.0 to 84.5 cm. The PCB profile was dominated by hexa- and hepta-chlorinated congeners, with PCB-153 (median: 114.9 ng g⁻¹ wet mass), PCB-138 (80.0 ng g⁻¹ w.m.), and PCB-180 (26.7 ng g⁻¹ w.m.) detected with the highest levels. Toxic mono-ortho congeners PCB-118, PCB-105 and PCB-180 with dioxin-like toxicity were found in >70% samples. 4,4′-DDE (81.0 ng g⁻¹ w.m.) prevailed the OCP signature, accounting for 80% of the total DDTs. A significant increasing trend in accumulation with size was found for PCB-52 (r_s = 0.512, p < 0.01) and PCB-114 (r_s = 0.421, p < 0.05). Comparison of our results with organochlorine contaminant (OC) pattern in some prey taxa suggest that contamination occurs primarily through the food web, with biomagnification factors of 0.14-6.99 which were positively correlated with the octanol-water partition coefficient (log K_ow; p < 0.05). This study, based upon a fairly large sample size collected mostly from incidentally captured animals over a short time period (June 2001-November 2002), present a temporal snapshot of OC contamination in wild, free-ranging loggerheads from Adriatic feeding grounds and provide a baseline for monitoring the regional OC trends in this endangered species.     

An Linear Programming Model for Batch Optimization in the Ecological Zinc Production

This paper presents a mathematical model for solving the blending composition problem used in the zinc smelting process. The model proposes an objective function maximizing profit in terms of the total income from the sale of zinc on the market and the cost of producing zinc. In addition to the constraints contained in the basic mathematical model, the constraints, which are in accordance with the specific production process of zinc and environmental requirements, are developed. This paper proposes a model that can align three contradictory demands (technological, economic, and environmental) present in zinc production. The results, obtained by numerical experiments, confirm the assumption that it is possible to assemble such an optimal batch that will “reconcile” all contradictory demands. This model can be applied to other similar processes of production with minor changes.     

Selenium deficiency in Yugoslavia and possible effects on health

New data on Se-deficiency in Yugoslavia are presented. The results include Se contents of soils, cereal crops and garlic grown in the investigated soils, and human serum and scalp hair from several towns and regions in this country. All data indicate a serious Se-deficiency. Analyses of human tissues show a very low Se-status of the Yugoslav population. In some regions, Se contents of garlic, grains and human serum and hair are approaching those in the low-selenium zone in China. It is assumed that the very low Se-status of the human population could be a risk factor for the endemic nephropathy and the urinary tract tumours in endemic areas.Originally presented at the 8th Meeting of the Society for Environmental Geochemistry and Health, University of Reading, England (April 1990) (Volume 13, No.2 (1991) of this journal) and subsequently submitted as a volunteered paper.     

Impact of a native Streptomyces flavovirens from mushroom compost on green mold control and yield of Agaricus bisporus

ABSTRACT

Thirty-five actinobacterial isolates, obtained from button mushroom (Agaricus bisporus) substrates (i.e., compost in different phases of composting, black peat or casing layer) in Serbia in 2014–2016 were tested in vitro against the causal agents of green mold in cultivated mushroom. Out of six most promising isolates, A06 induced 42.4% in vitro growth inhibition of Trichoderma harzianum T54, and 27.6% inhibition of T. aggressivum f. europaeum T77. The novel strain A06 was identified as Streptomyces flavovirens based on macroscopic and cultural characteristics and 16S rDNA sequence and used in mushroom growing room experiments. Actinobacteria had no negative influence on mycelial growth of the cultivated mushroom in compost in situ. Isolate S. flavovirens A06 enhanced mushroom yield significantly, up to 31.5%. The A06 isolate was more efficient in enhancing yield after inoculation with the compost mold T. aggressivum (26.1%), compared to casing mold T. harzianum (8%). Considering disease incidence, actinobacteria significantly prevented green mold in compost caused by T. aggressivum (6.8%). However, fungicide prochloraz-Mn had a more significant role in reducing symptoms of casing mold, T. harzianum, in comparison with actinobacteria (24.2 and 11.8%, respectively). No significant differences between efficacies of S. flavovirens A06 and the fungicide prochloraz-Mn against T. aggressivum were revealed. These results imply that S. flavovirens A06 can be used to increase mushroom yield and contribute to disease control against the aggressive compost green mold disease caused by Trichoderma aggressivum.     

Compassion fatigue and compassion satisfaction among family physicians in the Republic of Srpska,Bosnia and Herzegovina

Aims. The aim of this study was to examine self-perceived compassion fatigue and compassion satisfaction among family physicians in Bosnia and Herzegovina and describe potential contributing factors. Methods. The cross-sectional study enrolled 120 family physicians. Professional quality of life compassion satisfaction and fatigue version 5 (ProQOL5) was used to assess compassion satisfaction and two components of compassion fatigue, secondary traumatic stress and burnout. The symptoms of chronic fatigue were evaluated using the Chalder fatigue scale. Results. The majority of family physicians had moderate levels of compassion satisfaction (70%), burnout (75%) and secondary traumatic stress (55.8%). Family physicians with higher levels of secondary traumatic stress reported chronic fatigue (p?=?0.001), longer length of service (p?=?0.024) and residency training (p?=?0.041). Chronic fatigue (p?=?0.001), living in a rural environment (p?=?0.033), larger size of practice (p?=?0.006) and high number of patients with chronic disease (p?=?0.001) were associated with a higher risk of burnout. Conclusion. Family physicians with large practices, long years of experience, a high number of chronically ill patients and experiencing chronic fatigue are at risk of developing compassion fatigue. A systematic exploration of compassion fatigue in relation to working conditions might provide an appropriate starting point for the development of preventive interventions.