Book reviews

ANALYTICAL PLANNING: THE ORGANISATION OF SYSTEMS

Thomas L. Saaty and Kevin P. Kearns

Pergamon Press, 1985. Price: U.S. $40.00, U.K. £29.50.

THE GEOGRAPHER AT WORK

Peter Gould

Routledge and Kegan Paul, London 1985’ Price: £8.95.

UTOPIA ON TRIAL

Alice Colman

Hilary Shipman Ltd., 19 Framfield Road, Highbury, London. May 1985 (reprinted August, 1985). Price: £7.95.

SIR RAYMOND UNWIN: ARCHITECT, PLANNER AND VISIONARY

Frank Jackson

A. Zwemmer Ltd., London 1985. 187 pp. with maps and illustrations.

STRATEGIC PLANNING IN ACTION: THE IMPACT OF THE CLYDE VALLEY REGIONAL PLAN 1946–1982

R. Smith and U. Wannop (eds)

Gower, 1985, 272 pp. Price: £16.50.

LOCALITIES, CLASS AND GENDER

The Lancaster Regionalism Group (Linda Murgatroyd, Mike Savage, Dan Shapiro, John Urry, Sylvia Walby, Alan Warde, with Jane Mark‐Lawson)

Pion Ltd., 1985. Price: £12.00.     

Aerially guided leak detection and repair: A pilot field study for evaluating the potential of methane emission detection and cost-effectiveness

Novel aerial methane (CH₄) detection technologies were used in this study to identify anomalously high-emitting oil and gas (O&G) facilities and to guide ground-based “leak detection and repair” (LDAR) teams. This approach has the potential to enable a rapid and effective inspection of O&G facilities under voluntary or regulatory LDAR programs to identify and mitigate anomalously large CH₄ emissions from a disproportionately small number of facilities. This is the first study of which the authors are aware to deploy, evaluate, and compare the CH₄ detection volumes and cost-effectiveness of aerially guided and purely ground-based LDAR techniques. Two aerial methods, the Kairos Aerospace infrared CH₄ column imaging and the Scientific Aviation in situ aircraft CH₄ mole fraction measurements, were tested during a 2-week period in the Fayetteville Shale region contemporaneously with conventional ground-based LDAR. We show that aerially guided LDAR can be at least as cost-effective as ground-based LDAR, but several variable parameters were identified that strongly affect cost-effectiveness and which require field research and improvements beyond this pilot study. These parameters include (i) CH₄ minimum dectectable limit of aerial technologies, (ii) emission rate size distributions of sources, (iii) remote distinction of fixable versus nonfixable CH₄ sources (“leaks” vs. CH₄ emissions occurring by design), and (iv) the fraction of fixable sources to total CH₄ emissions. Suggestions for future study design are provided.

Implications: Mitigation of methane leaks from existing oil and gas operations currently relies on on-site inspections of all applicable facilities at a prescribed frequency. This approach is labor- and cost-intensive, especially because a majority of oil and gas–related methane emissions originate from a disproportionately small number of facilities and components. We show for the first time in real-world conditions how aerial methane measurements can identify anomalously high-emitting facilities to enable a rapid, focused, and directed ground inspection of these facilities. The aerially guided approach can be more cost-effective than current practices, especially when implementing the aircraft deployment improvements discussed here.     

Pesticide decontamination from fabric by laundering and simulated weathering1

Abstract

This laboratory study investigated the effectiveness of selected detergents and the phenomenon of simulated environmental conditions (weathering) on the removal of a commercial‐grade mixture of parathion and methyl parathion from a three‐layer laminated fabric. The weathering treatment consisted of exposure and non‐exposure to simulated environmental conditions of heat, light, and humidity. Contaminated fabric samples were laundered in one of three detergents containing an anionic, a nonionic, and a combined anionic and nonionic surfactant. The test fabric, a three‐layer fabric containing an impermeable microporous film laminated between two layers of nylon, was pipette‐contaminated with 400 microliters of field strength pesticide solution and allowed to dry. Half of the contaminated samples were weathered in an Atlas Fade‐Ometer. All of the contaminated samples were subsequently laundered in a Launder‐Ometer. Percent of pesticide residue was determined by gas chromatography. Weathering did significantly reduce both parathion and methyl parathion residues remaining in the test fabric. No statistically significant difference was found among the three detergents. High amounts of both parathion and methyl parathion remained in the test fabric after weathering and laundry treatments. Before the test fabric can be recommended for use in protective garments further research is needed to develop more effective decontamination procedures.     

The penetration of formulated guthion® spray through selected fabrics

Abstract

A technique for comparing pesticide penetration through fabric was devised. It involved passing fabric swatches through a controlled spray system and measuring the pesticide residue transferring on and through the tested fabric. Six variations in fabric were selected for testing: 100% cotton woven chambray,

Scotch‐guard^® treated chambray, Tyvek^® , Crowntex^® , and two variations of Gore Tex^®. Guthion^® (azinphos‐methyl) was chosen as the insecticide for controlled use in this experiment because of its widespread use and relatively high toxicity.

Gas Chromatographie analysis of the amount of Guthion^® transferred through the outer fabric was made by the use of analysis of variance (ANOVA) and Duncan's multiple range test. The ANOVA for experiment replication showed no significant difference among the replications of each fabric. The treatment ANOVA was highly significant at the 0.01 level.

Duncan's multiple range test further analyzed the differences in the treatment, and three groups were found to be significantly different from each other. The two types of Gore Tex^®, Tyvek^® and Crowntex^® comprised the group permitting the least penetration. Scotch‐guard^® treated chambray followed, and untreated chambray allowed the greatest penetration.     

Pesticide decontamination from fabric by laundering and simulated weathering

This laboratory study investigated the effectiveness of selected detergents and the phenomenon of simulated environmental conditions (weathering) on the removal of a commercial-grade mixture of parathion and methyl parathion from a three-layer laminated fabric. The weathering treatment consisted of exposure and non-exposure to simulated environmental conditions of heat, light, and humidity. Contaminated fabric samples were laundered in one of three detergents containing an anionic, a nonionic, and a combined anionic and nonionic surfactant. The test fabric, a three-layer fabric containing an impermeable microporous film laminated between two layers of nylon, was pipette-contaminated with 400 microliters of field strength pesticide solution and allowed to dry. Half of the contaminated samples were weathered in an Atlas Fade-Ometer. All of the contaminated samples were subsequently laundered in a Launder-Ometer. Percent of pesticide residue was determined by gas chromatography. Weathering did significantly reduce both parathion and methyl parathion residues remaining in the test fabric. No statistically significant difference was found among the three detergents. High amounts of both parathion and methyl parathion remained in the test fabric after weathering and laundry treatments. Before the test fabric can be recommended for use in protective garments further research is needed to develop more effective decontamination procedures.     

Atmospheric Emissions from Oxidation Ponds

The electrodes in industrial precipitators collect many tons of dust daily, and the efficient transfer of this dust burden to the hoppers is a challenging problem in mechanical engineering. Many varieties of devices have been tried; hammers, vibrators, scrapers, water flushing, gas blasting, etc. Impact devices for this purpose are usually called “rappers.” Laboratory experiments described in this paper show that normal (perpendicular) rapping is more effective than shear rapping; that thick dust layers are more easily removed by rapping than thin ones; that rapping becomes easier with increasing temperature, within limits; and that the electrostatic forces acting upon the precipitated dust layer play an important role. Quantitative data are shown graphically. The relation of these results to previous studies by other investigators is discussed.     

SOIL-MOISTURE EFFECTS OF CONVERSION OF SAGEBRUSH COVER TO BUNCHGRASS COVER1

Precipitation, soil moisture, runoff, and vegetation were measured on two, 5- to 10-acre, big sagebrush (Artemisia tridentata) watersheds and two, equally small, beardless bluebunch wheatgrass (Agrophron inerme) watersheds that were converted from big sagebrush in 1967. The watersheds are located near Wolcott, Colorado, at an elevation of 7,200 feet, and are mantled with 2 to 3 feet of silty clay soils. Annual precipitation was about 13.5 inches; about 9 inches occurred as rain or snow from April through October and about 4.5 inches accumulated as a snowpack from November through March. Evapotranspiration was about 2 inches greater in 1968 and 1 inch greater in 1969 from the sagebrush watersheds than from the grass watersheds. With a mature stand of grass in 1970 and 1971 the differences in evapotranspiration were within the range of differences measured during the 3-year calibration period when all four watersheds were sagebrush. Water use was similar in the top 1 foot of soil but slightly more water was used by the grass in the 1- to 2-foot zone and more water being used by the sagebrush below 2 feet. Soil-water potential data indicated that only the big sagebrush used a small amount of water from the fractured shale at depths below 40 inches. Sagebrush used more water in August and September than the grass.     

Bisphenol A concentrations in receiving waters near US manufacturing and processing facilities

Bisphenol A (BPA) (CAS 80-05-7) was analyzed in receiving waters upstream and downstream of US manufacturers (1996 and 1997) and processors (1997) during seasonal low flow periods. BPA was not detected (< 1 microgram/l) in any surface water sample in 1996 or at six of seven sites in 1997. Concentrations near the seventh site ranged from 2 to 8 micrograms/l; however, its receiving stream had no measurable flow and concentrations represent undiluted effluent. All surface water concentrations from this and other studies were less than the freshwater predicted no effect concentration (PNEC) of 64 micrograms/l, suggesting that BPA discharges from manufacturing and processing facilities to surface water do not pose an environmental concern.