Transport and retention of Cryptosporidium parvum oocysts in sandy soils

A series of miscible-displacement experiments was conducted to examine the retention and transport behavior of oocysts in natural porous media. Three soils and a model sand were used that differed in physical and geochemical properties. Transport behavior was examined under various treatment conditions to help evaluate retention mechanisms. Significant retention of oocysts was observed for all media despite the fact that conditions were unfavorable for physicochemical interactions with respect to DLVO theory. The magnitude of retention was not influenced significantly by alterations in solution chemistry (reduction in ionic strength) or soil surface properties (removal of soil organic matter and metal oxides). On the basis of the observed results, it appears that retention by secondary energy minima or geochemical microdomains was minimal for these systems. The porous media used for the experiments exhibited large magnitudes of surface roughness, and it is suggested that this surface roughness contributed significantly to oocyst retention.     

Nonideal transport of contaminants in heterogeneous porous media: 10. Impact of co-solutes on sorption by porous media with low organic-carbon contents

The impact of co-solutes on sorption of tetrachloroethene (PCE) by two porous media with low organic-carbon contents was examined by conducting batch experiments. The two media (Borden and Eustis) have similar physical properties, but significantly different organic-carbon (OC) contents. Sorption of PCE was nonlinear for both media, and well-described by the Freundlich equation. For the Borden aquifer material (OC = 0.03%), the isotherms measured with a suite of co-solutes present (1,2-dichlorobenzene, bromoform, carbon tetrachloride, and hexachloroethane) were identical to the isotherms measured for PCE alone. These results indicate that there was no measurable impact of the co-solutes on PCE sorption for this system. In contrast to the Borden results, there was a measurable reduction in sorption of PCE by the Eustis soil (OC = 0.38%) in the presence of the co-solutes. The organic-carbon fractions of both media contain hard-carbon components, which have been associated with the manifestation of nonideal sorption phenomena. The disparity in results observed for the two media may relate to relative differences in the magnitude and geochemical nature of these hard-carbon components.     

Nonequilibrium transport of organic chemicals: The impact of pore-water velocity

The impact of variations in pore-water velocity on the nonequilibrium sorption and transport of organic chemicals was investigated. Miscible displacement experiments were performed with four organic chemicals (dichlorobenzene, naphthalene, tetrachloroethene and p-xylene) and three aquifer materials having low organic-carbon contents (0.02–0.1%). The results of the experiments were analyzed by using a one-dimensional advective-dispersive transport model, wherein sorption is considered instantaneous for a fraction of the sorbent and rate-limited for the remainder. An inverse relationship between the reverse sorption rate constant and the equilibrium sorption constant was evident for each of two velocities. However, there was an order-of-magnitude difference between the rate constants obtained at the two velocities. This suggests the existence of a time-scale effect, which must be accounted for when modeling the transport of organic solutes.     

Influence of hydroxypropyl-beta-cyclodextrin (HPCD) on the bioavailability and biodegradation of pyrene

It is well known that the limited aqueous solubilities of polycyclic aromatic hydrocarbons (PAH) often reduce their bioavailability to bacterial populations. The objective of this study was to test the impact of a solubility-enhancement reagent, hydroxypropyl-beta-cyclodextrin (HPCD), on the bioavailability and biodegradation of pyrene. No measurable loss of pyrene occurred for the control vials throughout the first 22 weeks of the experiment, indicating the absence of mass loss via abiotic transformation and volatilization. The vials containing pyrene and the degrader isolate (Burkholderia CRE 7), but no HPCD, also exhibited no measurable loss of pyrene throughout the experiment. Conversely, biodegradation of pyrene appears to have been initiated after approximately 15 weeks for the vials containing 10(4) mg l(-1) HPCD. By the end of the experiment, approximately 14% (w/w) of the pyrene was biodegraded in the presence of HPCD. These results indicate that HPCD may be useful for enhancing the bioavailability and biodegradation of pyrene and other PAHs.     

Biodegradation during contaminant transport in porous media: 4. Impact of microbial lag and bacterial cell growth

Miscible-displacement experiments were conducted to examine the impact of microbial lag and bacterial cell growth on the transport of salicylate, a model hydrocarbon compound. The impacts of these processes were examined separately, as well as jointly, to determine their relative effects on biodegradation dynamics. For each experiment, a column was packed with porous medium that was first inoculated with bacteria that contained the NAH plasmid encoding genes for the degradation of naphthalene and salicylate, and then subjected to a step input of salicylate solution. The transport behavior of salicylate was non-steady for all cases examined, and was clearly influenced by a delay (lag) in the onset of biodegradation. This microbial lag, which was consistent with the results of batch experiments, is attributed to the induction and synthesis of the enzymes required for biodegradation of salicylate. The effect of microbial lag on salicylate transport was eliminated by exposing the column to two successive pulses of salicylate, thereby allowing the cells to acclimate to the carbon source during the first pulse. Elimination of microbial lag effects allowed the impact of bacterial growth on salicylate transport to be quantified, which was accomplished by determining a cell mass balance. Conversely, the impact of microbial lag was further investigated by performing a similar double-pulse experiment under no-growth conditions. Significant cell elution was observed and quantified for all conditions/systems. The results of these experiments allowed us to differentiate the effects associated with microbial lag and growth, two coupled processes whose impacts on the biodegradation and transport of contaminants can be difficult to distinguish.     

Biosurfactant-enhanced solubilization of NAPL mixtures

Remediation of nonaqueous phase liquids (NAPLs) by conventional pump-and-treat methods (i.e., water flushing) is generally considered to be ineffective due to low water solubilities of NAPLs and to mass-transfer constraints. Chemical flushing techniques, such as surfactant flushing, can greatly improve NAPL remediation primarily by increasing the apparent solubility of NAPL contaminants. NAPLs at hazardous waste sites are often complex mixtures. However, the equilibrium and nonequilibrium mass-transfer characteristics between NAPL mixtures and aqueous surfactant solutions are not well understood. This research investigates the equilibrium solubilization behavior of two- and three-component NAPL mixtures (containing akylbenzenes) in biosurfactant solutions. NAPL solubilization is found to be ideal in water (i.e., obeys Raoult's Law), while solubilization in biosurfactant solutions was observed to be nonideal. Specifically, the relatively hydrophobic compounds in the mixture experienced solubility enhancements that were greater than those predicted by ideal enhanced solubilization theory, while the solubility enhancements for the relatively hydrophilic compounds were less than predicted. The degree of nonideality is shown to be a nonlinear function of the NAPL-phase mole fraction. Empirical relationships based on the NAPL-phase mole fraction and/or micelle-aqueous partition coefficients measured in single-component NAPL systems are developed to estimate values for the multicomponent partition coefficients. Empirical relationships that incorporate both the NAPL-phase mole fraction and single-component partition coefficients yield much improved estimates for the multicomponent partition coefficient.     

Influence of cation type, ionic strength, and pH on solubilization and mobilization of residual hydrocarbon by a biosurfactant

This study investigated the effect of cation type, ionic strength, and pH on the performance of an anionic monorhamnolipid biosurfactant for solubilization and removal of residual hexadecane from sand. Three common soil cations, Na⁺, Mg²⁺, and Ca²⁺, were used in these experiments and hexadecane was chosen to represent a nonaqueous phase liquid (NAPL) less dense than water. Results showed that hexadecane solubility in rhamnolipid solution was significantly increased by the addition of Na⁺ and Mg²⁺. Addition of up to 0.2 mM Ca²⁺ also increased hexadecane solubility. For Ca²⁺ concentrations greater than 0.2 mM there was little effect on hexadecane solubility due to competing effects of calcium-induced rhamnolipid precipitation and enhanced hexadecane solubilization. Efficiency of NAPL solubilization can be expressed in terms of molar solubilization ratios (MSR). The results showed that MSR values for hexadecane in rhamnolipid solutions increased 7.5-fold in the presence of 500 mM Na⁺, and 25-fold in the presence of 1 mM Mg²⁺. The presence of cations also reduced the interfacial tension between rhamnolipid solutions and hexadecane. For example, an increase in Na⁺ from 0 to 800 mM caused a decrease in interfacial tension from 2.2 to 0.89 dyn cm⁻¹. Similarly, decreasing pH caused a reduction in interfacial tension. The lowest interfacial tension value observed in this study was 0.02 dyn cm⁻¹ at pH 6 in the presence of 320 mM Na⁺. These conditions were also found to be optimal for removal of hexadecane residual from sand columns, with 58% of residual removed within three pore volumes. The removal of residual NAPL from the packed columns was primarily by mobilization, even though solubilization was significantly increased in the presence of Na⁺.     

Use of tracer tests to evaluate the impact of enhanced-solubilization flushing on in-situ biodegradation

Tracer tests were conducted to evaluate the effect of a complexing sugar flush (CSF) on in-situ biodegradation potential at a site contaminated by jet fuel, solvents, and other organic compounds. Technical-grade hydroxypropyl-beta-cyclodextrin was used during the CSF study, which was conducted in a hydraulically isolated cell emplaced in a surficial aquifer. In-situ biodegradation potential was assessed with the use of tracer tests, which were conducted prior to and immediately following the CSF study. Ethanol, hexanol, and benzoate were used as the biodegradable tracers, while bromide was used as a nonreactive tracer. The results indicate that the biodegradation of benzoate was similar for both tracer tests. Conversely, the biodegradation of ethanol (23% increase) and hexanol (41% increase) was greater for the post-CSF tracer test. In addition, analysis of core samples collected from within the test cell indicates that the population density of aerobic jet-fuel degraders increased in the vicinity of the injection wells during the CSF. These results indicate that the cyclodextrin flush did not deleteriously affect the indigenous microbial community. This study illustrates that tracer tests can be used to evaluate the impact of remediation activities on in-situ biodegradation potential.     

Analysis of a gas-phase partitioning tracer test conducted in an unsaturated fractured-clay formation

The gas-phase partitioning tracer method was used to estimate non-aqueous phase liquid (NAPL), water, and air saturations in the vadose zone at a chlorinated-solvent contaminated field site in Tucson, AZ. The tracer test was conducted in a fractured-clay system that is the confining layer for the underlying regional aquifer. Three suites of three tracers were injected into wells located 14, 24, and 24 m from a single, central extraction well. The tracers comprised noble gases (traditionally thought to be nonsorbing), alkanes (primarily water partitioning), perfluorides (primarily NAPL partitioning), and halons (both NAPL and water partitioning). Observations of vacuum response were consistent with flow in a fractured system. The halon tracers exhibited the greatest amount of retardation, and helium and the perfluoride tracers the least. The alkane tracers were unexpectedly more retarded than the perfluoride tracers, indicating low NAPL saturations and high water saturations. An NAPL saturation of 0.01, water saturation of 0.215, and gas saturation of 0.775 was estimated based on analysis of the suite of tracers comprising helium, perfluoromethylcyclohexane and dibromodifluoromethane, which was considered to be the most robust set. The estimated saturations compare reasonably well to independently determined values.     

Biodegradation during contaminant transport in porous media: V. The influence of growth and cell elution on microbial distribution

This study investigated the interaction between microbial growth and cell elution, and their influence on resultant microbial distribution between the aqueous and solid phases during solute transport in a sandy, low-organic-carbon-content porous medium. Miscible displacement experiments were conducted with salicylate as the model compound, and with different initial conditions (e.g., substrate concentrations and cell densities) to attain various degrees of microbial growth. For each experiment, salicylate and dissolved oxygen concentrations as well as cell densities were monitored in the column effluent. Cell densities were also measured in the porous medium at the beginning and end of each experiment. Total microbial growth was determined in two ways, one based on a cell mass balance for the system and the other based on total amount of salicylate degraded. For conditions yielding a considerable amount of microbial growth, the majority of the biomass was associated with the aqueous phase (68-90%). Conversely, under minimal-growth conditions, most cells (approximately 60-70%) were attached to particle surfaces. Significant cell elution was observed for most conditions, the rate of which increased in the presence of the substrate. The results suggest that the increase in aqueous-phase cells observed for the experiments exhibiting the greatest growth is associated with the production of new cells, and that under appropriate conditions aqueous-phase biomass can contribute significantly to contaminant biodegradation.