Microwave-Assisted Solvent Extraction of Air Particulates for the Determination of PAHs

A method for the determination of polycyclic aromatic hydrocarbons (PAHs) in air particulates using microwave-assisted solvent extraction (MASE) coupled to a microwave extraction system (MES) is proposed. During the period of August to October, 1994, Singapore was enveloped by haze caused by forest fires in Sumatra, Indonesia. Air sampling were carried out during September and October; the determination of ambient air PAH levels in Singapore was undertaken. PAH analysis by GC-MS provided excellent sensitivity, linearity of quantitation, peak identification. This technique was evaluated using certified reference materials (CRMs) HS-4 and HS-6. Good recoveries of PAHs (>73.3%) were obtained for both CRMs. The MASE technique using MES is suitable for the determination of PAH levels in ambient air with no clean-up step required.     

Anthropogenic impacts on heavy metal concentrations in the coastal sediments of Dumai, Indonesia

Concentrations of Cd, Cu, Pb, Zn, Ni and Fe were determined in the surface sediments to investigate the distributions, concentrations and the pollution status of heavy metals in Dumai coastal waters. Sediment samples from 23 stations, representing 5 different site groups of eastern, central and western Dumai and southern and northern Rupat Island, were collected in May 2005. The results showed that heavy metal concentrations (in microg/g dry weight; Fe in %) were 0.88 (0.46-1.89); 6.08 (1.61-13.84); 32.34 (14.63-84.90); 53.89 (31.49-87.11); 11.48 (7.26-19.97) and 3.01 (2.10-3.92) for Cd, Cu, Pb, Zn, Ni and Fe, respectively. Generally, metal concentrations in the coastal sediments near Dumai city center (eastern and central Dumai) which have more anthropogenic activities were higher than those at other stations. Average concentration of Cd in the eastern Dumai was slightly higher than effective range low (ERL) but still below effective range medium (ERM) value established by Long et al. (Environmental Management 19(1):81-97, 1995; Environmental Toxicology Chemistry 17(4):714-727, 1997). All other metals were still below ERL and ERM. Calculated enrichment factor (EF), especially for Cd and Pb, and the Pollution load index (PLI) value in the eastern Dumai were also higher than other sites. Cd showed higher EF when compared to other metals. Geo-accumulation indices (I(geo)) in most of the stations (all site groups) were categorized as class 1 (unpolluted to moderately polluted environment) and only Cd in Cargo Port was in class 2 (moderately polluted). Heavy metal concentrations found in the present study were comparable to other regions of the world and based on the calculated indices it can be classified as unpolluted to moderately polluted coastal environment.     

Seveso Women's Health Study: does zone of residence predict individual TCDD exposure?

The compound, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), is produced as an unwanted by-product of various chemical reactions and combustion processes, including the manufacture of chlorinated phenols and derivatives. In animals, TCDD exposure is associated with toxic, carcinogenic, developmental, and reproductive effects. In 1976, a chemical plant explosion in Seveso, Italy, exposed the residents in the surrounding community to the highest exposure to TCDD known in humans. Materials from an aerosol cloud of sodium hydroxide, sodium trichlorophenate and TCDD were deposited over an 18.1 km2 area. As evidence of the significant level of TCDD exposure, numerous animals died and 193 cases of chloracne were reported among residents of the area. Initially, the contaminated area was divided into three major exposure Zones (A, B, R) based on the concentration of TCDD in surface soils. To date, the majority of epidemiologic studies conducted in Seveso have used Zone of residence as a proxy measure of exposure. The purpose of the present study is to validate the use of Zone of residence in Seveso as a proxy measure of exposure against individual serum TCDD measurement, and to determine whether questionnaire information can improve the accuracy of the exposure classification. Using data collected from the Seveso Women's Health Study (SWHS), the first comprehensive epidemiologic study of the reproductive health of women in Seveso, we determined that Zone of residence is a good predictor of individual serum TCDD level, explaining 24% of the variance. Using questionnaire information could have improved prediction of individual exposure levels in Seveso, increasing the percent of the variation in serum TCDD levels explained to 42%.     

Use of different soft tissues of Perna viridis a s biomonitors of bioavailability and contamination by heavy metals (Cd,Cu, Fe,Pb, Ni,and Zn) in a semi-enclosed intertidal water,the Johore Straits

Green-lipped mussels, Perna viridis, were collected from the eastern and western parts of the Johore Straits in September 2004 and January 2005. Based on the heavy metal concentrations in the different soft tissues (gonad, foot, mantle, gills, muscle, and remaining soft tissues) of these mussel samples, the eastern part of the Johore Straits (which is divided into two portions by a causeway), recorded higher levels of bioavailability and contamination by Cd, Cu, Fe, Ni, and Zn when compared to the western part, while Kg. Pasir Puteh in the eastern part was found to record the highest bioavailability and contamination by heavy metals. The use of different soft tissues of P. viridis as biomonitors of bioavailability and contamination by Cd, Cu, Fe, Pb, Ni, and Zn in the semi-enclosed Johore Straits is proposed, since erroneous results due to spawning and the problem of defecation before dissection could be overcome. Hence, a more accurate interpretation of the bioavailability and contamination by heavy metals in coastal waters could be obtained. To our knowledge, this is the most detailed study on the bioavailability and contamination of heavy metals in the Johore Straits on the Malaysian side of the waterway carried out by using the different soft tissues and metal distribution based on the Mussel Watch approach.     

Trichoderma atroviride as a bioremediator of Cu pollution: An in vitro study

Isolated Trichoderma atroviride from Cu-polluted river sediment at the Serdang Industrial Area was studied under in vitro conditions to understand the mechanisms that allowed the fungi to thrive in the Cu-polluted freshwater ecosystem. From this study, adsorption was recognized as the main mechanism of Cu tolerance with 50–85% adsorption during the in vitro experiment. The uptake capacity of the isolate in liquid medium ranged from 0.8 to 11.2 mg g^?1 in the potato dextrose broth medium with increasing Cu concentrations from 25 to 300 mg L^?1. It was found that 2.7–5.0% of Cu was lost due to washing. The high percentage of Cu adsorption and the high uptake capacity of Cu by T. atroviride suggest that it is a potential bioremediator of Cu. However, further studies are needed to confirm its practical use as a bioremediating agent for Cu under field conditions.     

Development of a Local-Scale Spatially Refined Multimedia Fate Model (LSRMFM) for Urban-Scale Risk Assessment: Model Formulation, GIS-Based Preprocessing, and Case Study

A local-scale spatially refined multimedia fate model (LSRMFM) was developed to evaluate in detail the multimedia transport of organic compounds at a spatial level. The model was derived using a combination of an advection?Cdispersion?Creaction partial differential equation, a steady-state multimedia fugacity model, and a geographical information system. The model was applied to predicting four major volatile organic compounds that are produced as emissions (benzene, toluene, xylene, and styrene) in an urban and industrial area (the 50?×?50-km area was divided into 0.5?×?0.5-km segments) in Korea. To test the accuracy of the model, the LSRMFM was used to predict the extent of dispersion and the data compared with actual measured concentrations and the results of a generic multimedia fate model (GMFM). The results indicated that the method developed herein is appropriate for predicting long-term multimedia pollution. However, the comparison study also illustrated that the developed model has some limitations (e.g., steady-state assumption) in terms of explaining all the observed concentrations, and additional verification and study (e.g., validation using a large observed data set, integration with a more accurate runoff model) would be desirable. In comparing LSRMFM and GMFM, discrepancies between the LSRMFM and GMFM outputs were found, as the result of geographical effects, even though the environmental parameters were identical. The geographical variation for LSRMFM output indicated the existence of considerable local human and ecological risks, whereas the GMFM output indicated less average risk. These results demonstrate that the model has the potential for improving the management of pollutant levels under these refined spatial conditions.     

A review of antibiotic removal from domestic wastewater using the activated sludge process: removal routes,kinetics and operational parameters

Environmental Science and Pollution Research - Many advanced technologies have shown encouraging results in removing antibiotics from domestic wastewater. However, as activated sludge treatment is...     

Similarities and differences of metal distributions in the tissues of molluscs by using multivariate analyses

Multivariate analysis including correlation, multiple stepwise linear regression, and cluster analyses were applied to investigate the heavy metal concentrations (Cd, Cu, Fe, Ni, Pb, and Zn) in the different parts of bivalves and gastropods. It was also aimed to distinguish statistically the differences between the marine bivalves and the gastropods with regards to the accumulation of heavy metals in the different tissues. The different parts of four species of bivalves and four species of gastropods were obtained and analyzed for heavy metals. The multivariate analyses were then applied on the data. From the multivariate analyses conducted, there were correlations found between the soft tissues of bivalves and gastropods, but none was found between the shells and the soft tissues of most of the molluscs (except for Cerithidea obtusa and Puglina cochlidium). The significant correlations (P < 0.05) found between the soft tissues were further complemented by the multiple stepwise linear regressions where heavy metals in the total soft tissues were influenced by the accumulation in the different types of soft tissues. The present study found that the distributions of heavy metals in the different parts of molluscs were related to their feeding habits and living habitats. The statistical approaches proposed in this study are recommended for use in biomonitoring studies, since multivariate analyses can reduce the cost and time involved in identifying an effective tissue to monitor the heavy metal(s) bioavailability and contamination in tropical coastal waters.     

STABLE PROFILES OF PLUNGE BASINS1

The characteristics of scour holes were discussed including the problems created by them in relation to the hydraulic structures associated with their formation. The philosophy on the design and use of deflector buckets together with the need for plunge basins to dissipate the energy of the high velocity jets were reviewed. Laboratory observations were made to study the erosion of beds of gravel caused by water jets projected from spillway buckets. Flip buckets with 15, 30, 45 and 60 degrees exit angles were utilized. One-quarter inch and %-inch nominal size bed materials were used in the investigation. The gravel was placed in a large comprehensive scour basin to observe their behavior when subjected to the water jets. Besides the formula derived for the maximum depth of scour, a set of dimensionless equations were developed to describe the three-dimensional configuration of scour holes. The dimensions of stable plunge basins could be obtained from these profiles.     

Optimization of the Microwave-Assisted Solvent Extraction of Petroleum Hydrocarbons in Marine Sediment and Soil

A microwave-assisted solvent extraction (MASE) technique was developed for the quantitative extraction of gasoline- and diesel-range petroleum hydrocarbons (PHs) from soil and marine sediment samples. The influence of different extracting solvents, extraction temperature and duration of extraction on the recoveries of PHs was evaluated using a two-level orthogonal array design (OAD) with a OA8(27) matrix. Gas chromatographic-mass spectrometry (GC-MS) in multiple selective ion monitoring (MSIM) mode was used for the analysis of the PHs in environmental samples. The spiking range of the PHs in the environmental samples was between 1 to 1000 g/g. Good recoveries (>80%) could be obtained for most of the PHs using the optimum MASE conditions. The limit of detection (LOD) achieved by the GC-MS-MSIM was 0.02 g/g. A preliminary survey for the levels of PHs in marine sediment and soil samples from different parts of Singapore was carried out using the method.