Monitoring of Phenol in Wastewater Bioremediation by HPLC

Bioremediation emphasizes the detoxification and destruction of toxic substances by microorganisms. Wastewater obtained from an industrial concern was solvent extracted with methyl alcohol and dichloromethane and analysed by GC/MS. Besides phenol, a large variety of organic compounds were detected. Under controlled laboratory conditions, the wastewater was innoculated with a mixed culture of microorganisms specially selected for their abilities to degrade phenol. Samples were collected at regular intervals from the stirred tank bioreactor and analysed for phenol by reverse phase HPLC with a C18 column. Results shows that from an initial phenol concentration of 987 ppm, slightly more than 50% was destroyed within 163 hours. The dry weight of the microorganisms and the plate count (CFU/ml) shows a steady increase from 0.5238 gms to 0.5355 gms and from 1.1E+9 to 1.94E+13 respectively over the same period. This suggested that the phenol was consumed by the microorganisms as the sole carbon source.     

Sediments as a sink for UV filters and benzotriazoles: the case study of Upper Iguaçu watershed,Curitiba (Brazil)

Ingredients in home and personal care products, including UV filters and benzotriazoles, are high production volume chemicals extensively used in our daily life, despite several studies revealed their potential eco-toxicity and endocrine-disrupting capacity. Due to some features, such as high lipophilicity, low degradability, and persistence of many of these compounds, sediments can be considered a sink for them in the aquatic environment. In the present study, nine organic UV filters and three benzotriazoles were investigated for the first time in sediments from four urban rivers in Brazil. The contaminants were analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The results revealed that octocrylene (OC), etylhexyl-methoxycinnamate (EHMC), benzophenone-3 (oxybenzone, BP3), and benzotriazole (BZT) were the predominant compounds adsorbed on the sediments, with concentrations ranging from 5.6 to 322.2 ng g⁻¹ dry weight. The results reported in this work constitute the first data on the accumulation of polar benzotriazoles and lipophilic organic UV filters in sediments from Brazil.

     

Changes in polybrominated diphenyl ether (PBDE) levels in cooked food

Food surveys for levels of toxic chemicals frequently report the levels on an uncooked basis. It is known that cooking may in some conditions decrease the amount of dioxins and related chemicals in food. Surveys of polybrominated diphenyl ether (PBDE) levels in food to date show data from uncooked food only. In this article, it was shown that broiling, with fat dripped from the foods reported here, ground beef, ground lamb, catfish, trout, and salmon, reduces the amount of PBDEs in these foods. This suggests that calculations of food intake need to take into consideration levels in the cooked food rather than in the uncooked food.     

Phycobiliproteins extract from Spirulina protects against single-dose cadmium-induced reproductive toxicity in male mice

Environmental Science and Pollution Research - Cadmium (Cd) is known for its many toxic effects on male population such as hypogonadism and fertility difficulties, which are oftenly associated with...     

Biomass from phytopathogens and culture conditions improve Penicillium chrysogenum antimicrobial activity and antifungal compounds production

The present study evaluated the effect of culture conditions and phytopathogenic strain co-culture on the production of antimicrobial metabolites and antifungal activity of Penicillium chrysogenum R1, which PCR identified. Antimicrobial activity was determined using the Hunter-Hunter experimental design with three factors (pH, incubation temperature, and inoculum, at two levels each). The antifungal metabolites, β 1-3 glucanase and chitinase, produced in the presence of live and inactivated Fusarium oxysporum Fsox C11 biomass, were evaluated using HPLC-MS and GC-MS. Results showed that P. chrysogenum inhibited the growth of five phytopathogenic fungal strains, and the most significant inhibition was observed for F. oxysporum Fsox C11. The best conditions to achieve the highest antifungal activity of the cell-free extract were pH 7, 28°C, 1 × 10⁶ spores/mL, and 144 h of fermentation, observing 86% inhibition of F. oxysporum Fsox C11 growth. Production of antifungal metabolites such as 1,4-benzoquinone imine, viridicatic acid, phenol-5-methyl-2-(1-methyl ethyl), and hydrolytic enzymes β 1-3 glucanase and chitinase was detected. The results define the perspective in designing new processes and products for biocontrol phytopathogens.     

Long-term studies on the effects of nonvolatile organic compounds on porous media surface areas

This paper investigates the long-term behavior of porous media contaminated by nonvolatile organic compounds (NVOC) in terms of specific interfacial surface area. Specifically, a natural sand, Moffett sand (MS), was contaminated with naphthalene and the surface area was measured repeatedly over time using nitrogen adsorption-desorption techniques. A field-contaminated sand affected by lamp-black material (LB) from former manufactured gas plant operations was also studied. Lampblack is a carbonaceous skeleton containing polycyclic aromatic hydrocarbons (PAHs) and other hydrocarbons. It is hypothesized that soils contaminated by these types of chemicals will exhibit significantly less surface area than their clean counterparts. The surface areas for the contaminated MS samples increased toward their clean-MS values during the 700-h aging period, but achieved the clean values only after pentane extraction or heating at 60 degrees C. Heating at 50 degrees C failed to achieve a similar recovery of the clean-MS surface area value. Nonspecific mass loss tracked the increase in surface area as indirect evidence that naphthalene loss was the cause of the surface area increase. For the LB samples, aging at 100 degrees C produced a slight decrease in surface area and mass while aging at 250 degrees C caused the surface area to increase roughly threefold while the mass decreased by approximately 1%. These results suggest that, under moderate heating and over the time scale of this investigation, there is a redistribution of the complex contaminant mixture on the solid matrix. Greater temperatures remove mass more efficiently and therefore exhibited the surface area increase expected in this experiment.     

Transport of coliphage PRD1 in a surface flow constructed wetland.

A tracer study was conducted in a 3-ha surface flow constructed wetland to analyze transport performance of PRD1, an enteric virus model. The convection-dispersion equation (CDE), including a first-order reaction model, adequately simulated transport performance of PRD1 in the wetland under an average hydraulic loading rate of 82 mm/d. Convective velocity (v) and longitudinal dispersion coefficient (D) were estimated by modeling a conservative tracer (bromide) pulse through the wetland. Both PRD1 and bromide were simultaneously added to the entering secondary treated wastewater effluent. The mass of bromide and PRD1 recovered was 76 and 16%, respectively. The PRD1 decay rate was calculated to be 0.3/day. The findings of this study suggest that the CDE model and analytical moment equations represent a suitable option to characterize virus transport performance in surface flow constructed wetlands.