RESEARCH: Shrub Propagation Techniques for Biological Control of Invading Tree Species

Cornus stolonifera, Salix petiolaris, and Spiraea alba clones already located within the corridor of an electrical power line. To establish the efficiency of treatments, we examined the statistical differences of growth traits between species and treatments. An analysis of the effects of layering shows, after the first growth season, differences for all growth traits in only one species, Spiraea alba. After the second growth season, we observed the development of new aerial stems. Layering favors horizontal expansion of shrubs over height development. The third year after treatment, the effect of layering is reduced except for Cornus stolonifera, which continuously increases, as shown by the significant progression of the clone issued from the layer even five years after treatments. With the cutting back technique, we expected a distinct vertical growth of the shrubs at the expense of increasing the crown diameter. This technique would be best associated with the rejuvenation of clones, followed by a layering of new shoots to allow a horizontal expansion of the shrubs. Therefore, the formation of a dense shrub community by layering should be considered a valuable approach for the biological control of undesirable trees in powerline rights-of-way.     

Using penalty functions to evaluate aggregation models for environmental indices

The purpose of indices is to summarize a large volume of information into a single number that is easy to understand and interpret. Environmental indices provide a composite picture of an environmental condition derived from a series of observed measurements and parameters. They are used as communication tools by regulatory agencies to characterize the state of a specific environmental system (air, water, and sediments) and to study the impact of regulatory policies on various environmental management practices. In the development of environmental indices, a few issues and problems have been encountered arising as a result of the abstraction of information and data. These problems are referred to as characteristic properties that include ambiguity, eclipsing, compensation and rigidity. These characteristic properties have long been identified and interpreted in Boolean (e.g., Yes/No) or qualitative (e.g., low, medium, high) terms. In this paper, we propose a new approach to describe the above stated characteristic properties on a continuous scale to evaluate and compare the behavior of various aggregation models. Our approach is based on developing penalty functions for each characteristic property. A water quality index example by Swamee and Tyagi (2000) is used to explain our approach. A detailed case study for a developing microbial risk index is also provided to show how the proposed approach can be extended to complex hierarchical systems. Results show that it is possible to improve aggregation models for index development. Future research directions to improve index development are also discussed.     

Carbon dioxide capture and recovery by means of TSA and/or VSA

Experimental work is performed with a 5A zeolite on a small laboratory column with heating from the wall. Carbon dioxide adsorption occurs at atmospheric pressure and different CO₂ concentrations in nitrogen. Comparisons of different methods of desorption by heating, purge and/or vacuum are studied. Desorption by heating only leads to almost pure CO₂ (around 99% purity) and a recovery nearly linear to the heating temperature, ranging from 45% at 130 °C to 79% at 210 °C. Recovery can be subsequently increased with a nitrogen purge to more than 98% but the recovered carbon dioxide is diluted due to the dispersive character of the desorption wave and the operation time is long. Increasing the flow rate decreases the desorption time but has no effect on the purity because the total purge volume remains about the same. Substitution of the purge step with a vacuum step leads to pure CO₂ and almost total recovery. Desorption under vacuum only without heating leads to pure CO₂ (around 99% purity) but limited recovery (85% in the present work).Desorption under vacuum seems to be more simple for large-scale applications. When using a water liquid ring pump, the temperature of the ring must be kept as low as possible to provide a high operating capacity.     

Immobilization of iodide on copper(I) sulfide minerals

In the goal of finding efficient scavengers for radioiodide in conditions (pH, pE) close to those encountered in deep geological sites, sorption of iodide ions on cuprous sulfide minerals (especially roxbyite, Cu(1.75)S) has been studied. Surface analysis by X-ray photoelectron spectroscopy has shown that commercial cuprous sulfides are covered by an oxidized overlayer (mainly in the form of CuSO(4)). Therefore, a synthetic procedure to get roxbyite (typically by mixing Na(2)S with an aqueous suspension of commercial Cu(2)O) was applied to produce pure samples with clean surfaces. Batch equilibration of cuprous sulfide particles suspended in aqueous solutions containing iodide species has revealed significant consumption of iodide. The sorption mechanism involves the formation of a surface complex via the exchange of surface hydroxyl groups by iodide anions, as highlighted by a transient pH increase during the immobilization process. Other copper and mixed copper-iron sulfides (e.g. CuS, CuFeS(2)), which are stable over wide pH and potential ranges are also likely to accumulate iodide species. Because of the specific interaction between iodide and copper(I) centers on the minerals, high distribution coefficients (>1000 ml/g) were observed.     

An analysis of the environmental mobility of radiostrontium from weapons testing and Chernobyl in Finnish river catchments

The mobility of radiostrontium within the Arctic environment and surrounding area has been studied by analysing the mobility of 90Sr in river catchments that are within Finland. The environmental mobility of 90Sr deposited by both nuclear weapons testing and the Chernobyl accident has been investigated in five Finnish river catchments. Different models assessing the time-dependent mobility of 90Sr have been evaluated. No significant differences were found between the mobility of 90Sr from nuclear weapons tests and from the Chernobyl accident. Model parameters obtained by fitting to the measurements of the deposition and runoff rates of the nuclear weapons test fallout gave predictions which were consistent with the mid- and long-term contamination by the Chernobyl fallout. A comparison of 90Sr with 137Cs showed that they had similar mobility on deposition but, as time passed, the relative mobility of 90Sr increased with respect to 137Cs over a period of 5-8 years. Once the relative migration of 90Sr with respect to 137Cs reached equilibrium, its runoff rate was, on average, approximately an order of magnitude greater than 137Cs.     

Quantifying summed fullerene nC60 and related transformation products in water using LC LTQ Orbitrap MS and application to environmental samples

The application of engineered nanomaterials increases strongly. Development of analytical techniques and their application to environmental samples is essential for human and environmental risk assessment of the nanoparticles. The objective of this study was to develop a sensitive analytical method to quantify nC(60) in water, using accurate mass screening liquid chromatography-hybrid linear ion trap Orbitrap mass spectrometry. nC(60) can be transformed by oxidation, reduction and photochemical reaction. Therefore, the formation of some transformation products of nC(60) was studied as well. Finally, the developed analytical method was applied to surface water samples from several locations in the Netherlands. The developed method enabled to detect and quantify aqueous concentrations of the summed nC(60) and its transformation products as low as 5 ng/L. It was observed that nC(60) transformation products exceed quantities of the parent C(60). Despite the high sensitivity of the developed method, no nC(60) or transformation products were detected in an array of Dutch surface waters. This might be due to low emissions, losses in the aqueous phase by sedimentation, sorption or further transformation processes.     

The impact of coal utilization in Texas under the National energy plan

The paper describes the results of a study of the impact of the National Energy on the trend towards increased utilization of coal and lignite in Texas with forecasts of increased coal and lignite utilization for the electric utility and industrial sectors. Environmental impacts of this increased coal and lignite use are projected in terms of increased air pollutant emissions and air quality impacts. Economic costs of compliance with alternative source emission regulations are also projected for the electric utility industry.Lignite consumption in Texas under the National Energy Plan is projected to increase from the present 13 million metric tons in 1976 to 57 million metric tons annually by 1985. Sub-bituminous coal consumption in Texas is projected to increase from 1 million metric per year in 1976 to 49 million metric tons per year in 1985. Bituminous coal consumption in Texas is expected to increase from less than one million metric tons per year in 1976 to about 3 million metric tons per year in 1985.Major increases in sulfur oxides emissions from coal and lignite combustion in Texas can be expected by 1985 of up to 1.5 × 10⁹ kg per year without controls and 0.2 × 10⁹ kg per year with controls. Increases in acid precipitation formation will result in north-east Texas from extensive lignite usage for electric power generation as a detriment to agriculture. The photochemical air pollution problem in the Houston area will probably worsen primarily because of increased nitrogen oxides and sulfur oxides emissions because of industrial coal combustion. Capital costs of air pollution controls in Texas for coal-fired utility boilers are estimated as up to U.S. $3.9 billion by 1985, with total operating costs of up to U.S. $1.2 billion per year.     

Effects of atmospheric mercury pollution on terrestrial ecosystem in Chongqing, China

1　ＩｎｔｒｏｄｕｃｔｉｏｎＭｅｒｃｕｒｙ(Ｈｇ)ａｓａｇｌｏｂａｌｐｏｌｌｕｔａｎｔｈａｓｃａｕｓｅｄｃｏｎｃｅｒｎｗｏｒｌｄｗｉｄｅｓｉｎｃｅｔｈｅｅｎｄｏｆ 1980ｓ.Ｉｔｉｓｅｍｉｔｔｅｄｔｏｔｈｅａｔｍｏｓｐｈｅｒｅｆｒｏｍｂｏｔｈａｎｔｈｒｏｐｏｇｅｎｉｃａｎｄｎａｔｕｒａｌｓｏｕｒｃｅｓ.Ｉｍｐｏｒｔａｎｔｓｏｕｒｃｅｏｆｔｈｅｆｏｒｍｅｒｉｓｔｈｅｄｉｓｃｈａｒｇｅｆｒｏｍ ｐｒｏｄｕｃｔｉｏｎａｎｄｕｓｅｏｆＨｇａｓｗｅｌｌａｓｔｈｅｃｏｍｂｕｓｔｉｏｎｏｆｆｏｓｓｉｌｆｕｅｌｓ(Ｎｒｉ…