RESEARCH: Shrub Propagation Techniques for Biological Control of Invading Tree Species

Cornus stolonifera, Salix petiolaris, and Spiraea alba clones already located within the corridor of an electrical power line. To establish the efficiency of treatments, we examined the statistical differences of growth traits between species and treatments. An analysis of the effects of layering shows, after the first growth season, differences for all growth traits in only one species, Spiraea alba. After the second growth season, we observed the development of new aerial stems. Layering favors horizontal expansion of shrubs over height development. The third year after treatment, the effect of layering is reduced except for Cornus stolonifera, which continuously increases, as shown by the significant progression of the clone issued from the layer even five years after treatments. With the cutting back technique, we expected a distinct vertical growth of the shrubs at the expense of increasing the crown diameter. This technique would be best associated with the rejuvenation of clones, followed by a layering of new shoots to allow a horizontal expansion of the shrubs. Therefore, the formation of a dense shrub community by layering should be considered a valuable approach for the biological control of undesirable trees in powerline rights-of-way.     

Towards the improvement of UN N.5 test method for the characterization of substances which in contact with water emit flammable gases

This paper deals with a sensitivity analysis of main parameters affecting the measurement of the gas flowrate emitted during testing substances for their potential to emit flammables gases in dangerous quantities where in contact with water, according to the UN N.5 test procedure. UN N.5 is described in the Manual of Tests and Criteria of United Nations (part of the Orange Book) (ONU Manual of Test and Criteria, 2008), serving both applications of international transport regulations as well as classifications of dangerous substances according to Globally the Harmonized System (GHS) and the derived regulation applying in the EU known as “CLP” Regulation (Regulation (EC) No 1271/2008). The main reason that justifies the present research is that the measurement of emitted gases is highly critical in the final classification resulting from the interpretation of the test results. Moreover, that idea has been raised to adapt the UN N.5 test protocol for classifying, in the future, substances that by contact with water would emit dangerous quantities of toxic gases.Experiments have been carried out to cover the analysis of the influence of ambient temperature, overall volume of glassware, nature of aqueous media, mass sample and sample-to-liquid mass ratio, since such parameters are not fixed within any defined range in the UN N.5 test procedure. The influence of the flow rate measuring device was also considered. Results confirm that the above mentioned parameters may play a significant role to such an extent as to finally alter the final classification resulting from the testing. Guiding principles have also been derived from our measurements and observations towards an improved and more robust UN test protocol in the future.     

Bioremediation of Chromate by Sulfate-Reducing Bacteria, Cytochromes c3 and hydrogenases

The treatment of soils and ground waters polluted by heavy metals is of economical and environmental interest. Reduction of Cr(VI) to the less toxic Cr(III) associated to its precipitation is a potentially useful process for bioremediation. In order to develop ecological processes using micro-organisms, we have compared various sulfate-reducing bacteria for enzymatic reduction of chromate. The best Cr(VI) reductase activity was obtained with Desulfomicrobium norvegicum. Despite morphological changes induced by the presence of chromate, this strain can grow in the presence of up to 500 M Cr(VI) and can decontaminate waters polluted by Cr(VI) when seeded in bioreactors. We have demonstrated the ability of several metalloenzymes (cytochromes c ₃ and hydrogenases) to reduce chromate. Biophysical investigations of the chromate/protein interaction in order to get further informations on the mechanism of metal reduction by cytochromes c ₃ are under the way.     

Advisory Committee: A Powerful Tool for Helping Decision Makers in Environmental Issues

/ It has been suggested that the general public should be moreinvolved in environmental policy and decision making. It is important forthem to realize that they will have to live with the consequences ofenvironmental policies and decisions. Consequently, policy makers shouldconsider the concerns and opinions of the general public before makingdecisions on environmental issues. This raises questions such as: How can weintegrate the perceptions and reactions of the general population inenvironmental decisions? What kind of public participation should weconsider? In the present study, using a new regional ecosystem model, weattempted to integrate these aspects in its decision making model byincluding the formation of an advisory committee to resolve problems relatedto waste management. The advisory committee requested the activeparticipation of representatives from all levels of the community: economic,municipal, and governmental intervenors; environmental groups; and citizens.Their mandates were to examine different management strategies available inthe region, considering all the interdisciplinary aspects of each strategy,elaborate recommendations concerning the management strategies that are mostsuitable for all, and collaborate in communication of the information to thegeneral population. The results showed that at least in small municipalitiessuch an advisory committee can be a powerful tool in environmental decisionmaking. Conditions required for a successful consultation process, such aseveryday lay language and the presence of a facilitator other than ascientific expert, are discussed.KEY WORDS: Public consultation; Environmental policies;Interdisciplinary aspects; Municipal sewage sludge management; Generalpopulation; Decision-making process     

Soil and tree-ring chemistry response to liming in a sugar maple stand

An evaluation of the impact of dolomitic lime [CaMg(CO3)2] on soils (five years after treatment) and sapwood chemistry (after four growing seasons) was realized for a Ca-deficient sugar maple stand at the lake Clair watershed. The effect on humus chemistry was significant: exchangeable Mg and Ca, effective acidity (EA), base saturation (BSe), pH, and effective cation exchange capacity (CECe) significantly increased, while exchangeable Fe significantly decreased. In the B horizon, liming increased exchangeable Ca, Mg, and Mn concentrations while decreasing other acid cations. No significant temporal trends in element concentrations in tree rings could be detected, although the lime treatment significantly changed the average xylem Mg and Mn concentrations as well as the average Mg/Mn and Ca/Mn ratios of the sapwood. The absence of temporal trends in rings from the last 20 yr implied a significant re-equilibration of elements through the sapwood. Significant relationships were found between averaged xylem Ca/Mn and Mg/Mn ratios and exchangeable humus Ca, Mg, Mn, Al, Fe, and H+ concentration, EA, CECe, and BSe, suggesting that the average xylem Ca/Mn and Mg/Mn ratios are strong indicators of the soil acid-base status.     

How does economic complexity influence environmental degradation? New insights from African countries

This paper seeks to investigate the effect of economic complexity on environmental degradation in 20 selected African countries over the period 1991–2014. The Feasible Generalized Least Square (FGLS), and Driscoll-Kraay estimators (DK) are used to capture the objectives of the study. The results suggest that economic complexity and economic growth enhance environmental degradation. Also, natural resources rents and globalization improve environmental quality. Furthermore, the findings reject the U-shaped relationship between economic complexity and environmental degradation. In addition, the Dumitrescu-Hurlin panel causality test shows a bidirectional causal relation between economic complexity and environmental degradation. Taking into account the ecological deficit or ecological reserve status of country, it is shown that while the natural resource rents reduce environmental degradation in ecological reserve countries, they increase environmental degradation in ecological deficit countries. The results are robust when an alternative measure of economic complexity is used. Based on these findings, the paper suggests that the governments of African countries should take into account economic complexity when designing their environmental protection policies.     

Carbon dioxide capture and recovery by means of TSA and/or VSA

Experimental work is performed with a 5A zeolite on a small laboratory column with heating from the wall. Carbon dioxide adsorption occurs at atmospheric pressure and different CO₂ concentrations in nitrogen. Comparisons of different methods of desorption by heating, purge and/or vacuum are studied. Desorption by heating only leads to almost pure CO₂ (around 99% purity) and a recovery nearly linear to the heating temperature, ranging from 45% at 130 °C to 79% at 210 °C. Recovery can be subsequently increased with a nitrogen purge to more than 98% but the recovered carbon dioxide is diluted due to the dispersive character of the desorption wave and the operation time is long. Increasing the flow rate decreases the desorption time but has no effect on the purity because the total purge volume remains about the same. Substitution of the purge step with a vacuum step leads to pure CO₂ and almost total recovery. Desorption under vacuum only without heating leads to pure CO₂ (around 99% purity) but limited recovery (85% in the present work).Desorption under vacuum seems to be more simple for large-scale applications. When using a water liquid ring pump, the temperature of the ring must be kept as low as possible to provide a high operating capacity.     

Using penalty functions to evaluate aggregation models for environmental indices

The purpose of indices is to summarize a large volume of information into a single number that is easy to understand and interpret. Environmental indices provide a composite picture of an environmental condition derived from a series of observed measurements and parameters. They are used as communication tools by regulatory agencies to characterize the state of a specific environmental system (air, water, and sediments) and to study the impact of regulatory policies on various environmental management practices. In the development of environmental indices, a few issues and problems have been encountered arising as a result of the abstraction of information and data. These problems are referred to as characteristic properties that include ambiguity, eclipsing, compensation and rigidity. These characteristic properties have long been identified and interpreted in Boolean (e.g., Yes/No) or qualitative (e.g., low, medium, high) terms. In this paper, we propose a new approach to describe the above stated characteristic properties on a continuous scale to evaluate and compare the behavior of various aggregation models. Our approach is based on developing penalty functions for each characteristic property. A water quality index example by Swamee and Tyagi (2000) is used to explain our approach. A detailed case study for a developing microbial risk index is also provided to show how the proposed approach can be extended to complex hierarchical systems. Results show that it is possible to improve aggregation models for index development. Future research directions to improve index development are also discussed.