Polymeric Complexes from Casein and Starch Phosphate: Characteristics and Enzyme Susceptibility

Novel biodegradable materials were prepared from potato starch enriched in phosphato moieties (DS 0.018 and 0.033) and casein in defatted milk. The components were blended in proportions providing starch: casein ratios of 2:1, 1:1, and 1:2 and were then precipitated with hydrochloric acid. Aqueous solubility, water-binding capacity, infrared spectra, and thermal analysis (thermogravimetry[7] and differential thermogravimetry of the precipitates revealed that they were not simple physical mixtures of the components. The components interacted with one another electrostatically with involvement of the phosphate groups of starch and the peptide bond of casein, as documented by infrared spectra. Because of insolubility in 7 M aqueous urea solution, they might also be considered as complexes in which the components were chemically bound.     

Empirical Estimation of Virtual Point Source Height Over a Bank of Coke Ovens

This paper addresses an empirical method of assessment of the height of a virtual point source. In order to achieve such assessment, three planes defining the location of a virtual point source in a space are created and formulas describing the geometry of observer’s sight and plume orientation are used. Data for calculations are obtained on a basis of plume photographs. The final position of a virtual emission point is described by a set of its coordinates in the Cartesian coordinate system. Presented method may be applied as a means to verify and validate the existing formulas describing the rise of plume above the stack exit or as a tool enabling acquisition of information for the sake of creating new formulas of this type. The calculation of the location of a virtual point source ascribed to the point emission from the roof of the bank of coke oven is presented and illustrated with photographs which reveal position of plume, adequate planes, axes and characteristic objects.     

Potential ecological risk assessment and predicting zinc accumulation in soils

Environmental Geochemistry and Health - The aims of this study were to investigate zinc content in the studied soils; evaluate the efficiency of geostatistics in presenting spatial variability of...     

Uncertainty aspects in process safety analysis

Uncertainties of input data as well as of simulation models used in process safety analysis (PSA) are key issues in the application of risk analysis results. Mostly, it is connected with an incomplete and uncertain identification of representative accident scenario (RAS) and other vague and ambiguous information required for the assessment of particular elements of risk, especially for determination of frequency as well as severity of the consequences of RAS. The authors discuss and present the sources and types of uncertainties encountered in PSA and also methods to deal with them. There are different approaches to improve such analysis including sensitivity analysis, expert method, statistics and fuzzy logic. Statistical approach uses probability distribution of the input data and fuzzy logic approach uses fuzzy sets. This paper undertakes the fuzzy approach and presents a proposal for fuzzy risk assessment. It consists of a combination of traditional part, where methods within the process hazard analysis (PHA) are used, and “fuzzy part”, applied quantitatively, where fuzzy logic system (FLS) is involved. It concerns frequency, severity of the consequences of RAS and risk evaluation. In addition, a new element called risk correction index (RCI) is introduced to take into account uncertainty concerned with the identification of RAS. The preliminary tests confirmed that the final results on risk index are more precisely and realistically determined.     

Polymer resins for recovery of valuable metals

Vinylbenzyl chloride/divinylbenzene gel copolymer beads have been modified using piperidine, hexamethyleneimine, piperazine, 1-(2-aminoethyl)piperazine, and N-cyclohexyl-1,3-propanediamine. These resins were then tested for the sorption of noble metal ions, namely, Re(VII), Pd(II), Pt(IV), and Au(III), from a 0.1 M HCl solution. The effect of these resins on the sorption of other coexisting ions, such as Cu, Ni and Fe, was also studied. Of the resins tested, resin 4 [1-(2-aminoethyl)piperazine groups] showed the highest sorption capacity for Pt(IV) and Re(VII) from single and multicomponent solutions, with the sorption of Pt(IV) from the multicomponent solution (Re, Au, Pd, Pt, Cu, Ni Fe) in 0.1 M HCl reaching 68 mg Pt/g.     

Application of mindfulness-based stress reduction to a stress management intervention in a study of a mining sector company

Purpose. The aim of this article was to check whether mindfulness-based stress reduction (MBSR) is an effective intervention in reducing work-related stress in the case of workers in a copper mine. Methods. Sixty six employees were randomized to the experimental group (32 participants) or to the control group (34 participants). Work-related stress was measured using the job content questionnaire (JCQ) and mental health was measured using the general health questionnaire (GHQ-28) Experimental manipulation was 40-h MBSR training. Results. Multivariate repeated-measures analysis of variance revealed a significant increase of JCQ decision latitude (F?=?17.36, p?<?0.001) and social support (supervisor F?=?9.00, p?<?0.004; coworker F?=?5.61, p?<?0.020), and a significant decrease in GHQ-28 anxiety (F?=?5.28, p?<?0.079) and depression (F?=?3.95, p?<?0.048) due to the intervention. Conclusions. The study confirms that MBSR can be effective in reducing stress resulting from the external risk (and/or imagined fear) of losing one’s health or life. The use of MBSR could be recommended in health and safety activities in difficult and dangerous work conditions, such as mining, to promote workers’ well-being.     

Inhibition and facilitation of bryozoan and ascidian settlement by natural multi-species biofilms: effects of film age and the roles of active and passive larval attachment

Sessile marine invertebrate larvae can recognize suitable settlement substrata by using various environmental cues, including organic/microbial biofilms. In laboratory choice assays, the effect of biofilms of varying ages on the settlement behaviour of two fouling organisms was assessed. The species included the arborescent cheilostome bryozoan Bugula flabellata (Thompson) and the solitary ascidian Ciona intestinalis (L.), both of which are characteristic of temperate sublittoral hard substratum assemblages in northwest Europe. Experiments were carried out using polystyrene petri dish substrata preconditioned with multispecies biofilms from natural laboratory-aquarium seawater for 1, 3, 6 or 12 d. Unfilmed (new, initially sterile) dishes were used as control substrata. Whereas the coronate larvae of B. flabellata generally were inhibited by biofilming, irrespective of film age, the settlement of tadpole larvae of C. intestinalis was facilitated on biofilmed substrata, and numbers of settled larvae generally increased with biofilm age: the highest mean numbers were counted on 12 d-old biofilms. In C. intestinalis, settlement and metamorphosis are processes which can be temporally separate and are possibly induced by different environmental cues. This study therefore distinguished between C. intestinalis larvae which were attached to the biofilm surface by the anterior, and those larvae entrapped by the biofilm but not settled in the conventional meaning of the term. As reported in previous studies, we did observe that such entrapped larvae could subsequently attach and develop successfully into sessile juveniles. Both the numbers of “attached” and “trapped” tadpoles increased with biofilm age. Assuming that “settlement” is essentially a process involving the active behavioural response of larvae to environmental cues, it seems that the facilitated attachment of C. intestinalis onto biofilmed substrata is due to the combined effect of active habitat selection and passive deposition/“entrapment” of larvae onto the “sticky” substratum. Received: 21 August 1996 / Accepted: 21 November 1996     

<Emphasis Type="Italic">Fusarium</Emphasis> head blight incidence and mycotoxin accumulation in three durum wheat cultivars in relation to sowing date and density

Durum wheat (Triticum turgidum var. durum) is an important crop in Europe, particularly in the Mediterranean countries. Fusarium head blight (FHB) is considered as one of the most damaging diseases, resulting in yield and quality reduction as well as contamination of grain with mycotoxins. Three winter durum wheat cultivars originating from Austria, Slovakia, and Poland were analyzed during 2012–2014 seasons for FHB incidence and Fusarium mycotoxin accumulation in harvested grain. Moreover, the effects of sowing density and delayed sowing date were evaluated in the climatic conditions of Southern Poland. Low disease severity was observed in 2011/2012 in all durum wheat cultivars analyzed, and high FHB occurrence was recorded in 2012/2013 and 2013/2014 seasons. Fusarium graminearum was the most abundant pathogen, followed by Fusarium avenaceum. Through all three seasons, cultivar Komnata was the most susceptible to FHB and to mycotoxin accumulation, while cultivars Auradur and IS Pentadur showed less symptoms. High susceptibility of cv. Komnata was reflected by the number of Fusarium isolates and elevated mycotoxin (deoxynivalenol, zearalenone, and moniliformin) content in the grain of this cultivar across all three seasons. Nivalenol was identified in the samples of cv. Komnata only. Genotype-dependent differences in FHB susceptibility were observed for the plants sown at optimal date but not at delayed sowing date. It can be hypothesized that cultivars bred in Austria and Slovakia show less susceptibility towards FHB than the cultivar from Poland because of the environmental conditions allowing for more efficient selection of breeding materials.     

Assessment of the content,occurrence, and leachability of arsenic,lead, and thallium in wastes from coal cleaning processes

The aim of the study was to evaluate the content, occurrence, and leachability of arsenic (As), lead (Pb), and thallium (Tl) in wastes from coal cleaning processes with respect to the safe management of this waste. The study focused on wastes resulting from the wet gravitation and flotation processes employed for the purposes of coking coal cleaning in four coal mines situated in the Upper Silesian Coal Basin (Poland). The scope of the study included (i) determination of the content of these elements in the investigated wastes using atomic absorption spectrometry, (ii) evaluation of their mode of occurrence using electron microprobe analysis, and (iii) preliminary assessment of their leachability in deionized water. The content of the analyzed elements in the examined samples of coal waste was twice as high as the average content of these elements in the Earth’s crust. The contents of As and Pb, however, did not exceed their permissible contents in inert waste in accordance with Polish legal regulations based on EU directives. The limit on the content of Tl is not specified by these regulations, but its amount in the examined samples was similar to that occurring in the soils. Moreover, leaching tests have shown that these elements are hardly eluted from the analyzed material. Their content in the water leachates was generally lower than the detection limit of the analytical method, complying with the standards for good and very good water quality. Low leachability of these elements most probably results from their mode of occurrence in the investigated wastes. The chemical analysis using an electron microprobe and the analysis of the correlation between these elements, e.g., total and pyritic sulfur, have shown that Pb, As, and Tl are mainly found in sulfide minerals which are characterized by negligible solubility. In conclusion, the investigated hard coal processing waste does not constitute a threat to the environment and can be commercially used or safely neutralized, e.g., by landfilling.

     

The effect of spent bleaching earth ageing process on its physicochemical and microbial composition and its potential use as a source of fatty acids and triterpenes

This study was aimed at investigating the physicochemical and microbiological changes that took place during the ageing process of spent bleaching earth in the presence of autochthonous microorganisms. Research material included fresh spent bleaching earth (SBE₀) and the same material after 3 years of storage at the constant temperature of 20 °C, without aeration and moistening (SBE₃). Changes in the chemical composition of analysed waste material were observed during its ageing process point to a spontaneous bioconversion of fat substance towards formation and/or release of free saturated fatty acids C16:0 and C18:0 (14.3 g 100 g^?1 D.M.), triterpenes (8.48 g 100 g^?1 D.M.), cholesterol (3.29 g 100 g^?1 D.M.), small quantities of carbohydrates and esters (0.80 g 100 g^?1 D.M.). This process was accompanied by other changes in physicochemical parameters of the waste material, such as colour, odour and viscosity, decrease in fat content from 28.27 to 24.6 % and that of soluble forms of metals (Mo, Cu, Fe, Zn, Ni, Cr and Mn), ranging from 25 to 75 %, and an increase in pH, from 3.85 to 4.2. At the same time, changes in the microbial consortium were observed.