Environmental and Biological Assessment of Exposure to Benzene in Petroleum Workers

Occupational exposure to benzene was measured in two gasoline marketing terminals and five major refineries in Singapore. A total of 280 workers were monitored over two years. This assessment was carried out with two primary objectives: (1) To find out the extent of occupational exposure to benzene in the petroleum industry in Singapore, (2) To identify suitable biomarkers for monitoring of low levels of benzene exposure. The exposure was measured in five different categories of petroleum and petrochemical workers, i.e., truck drivers, despatch assistant, process operators, oil movements operators and laboratory technicians. The results revealed wide variations in exposure, from 0.01 to 13.6 ppm for personal time weighted average (TWA) exposure over the whole workshift. The exposure of truck drivers appeared to be the highest, with geometric mean (GM) of 1.98 ppm (ranged from 0.25 to 13.6 ppm). The average benzene exposure for process operators was relative low with a GM of 0.04 ppm. Lowest benzene exposure was found in the laboratory technicians, with a GM of 0.02 ppm. As cigarette smoking is known to affect metabolism of benzene, data analyses on the relationships with environmental exposure were conducted only on the 190 nonsmokers. The results showed that urinary trans, trans-muconic acid (ttMA), unmetabolized benzene in urine (UBZ) and benzene in blood (BBZ) were better biomarkers for low level benzene exposure as compared to urinary phenolic metabolites in urine, such as hydroquinone, phenol and catechol.     

Building a strategy for soil protection at local and regional scale—the case of agricultural wastes landspreading

Agricultural wastes (AW) are produced in huge quantities worldwide and may cause detrimental effects on environmental quality, affecting soil, water, and air quality. Given the growing soil degradation worldwide, the need for more food of good quality and therefore the intensified agriculture, it is important to develop recycling plans even for those types of treated AW (e.g., composts) that are not considered hazardous. Two strategic approaches for safe and sustainable landspreading of organic wastes are proposed, depending on wastes properties and hazard potential, i.e., an approach appropriate for traditionally used wastes (manures and composts) and another approach for wastes that are potentially hazardous or hazardous and should only be reused under specific restrictions. Both approaches foresee concrete steps, require close cooperation between farmers and local/regional authorities, and are appropriate to ensure environmental sustainability at AW recycling or disposal areas. Desktop and web application tools are also presented that are anticipated to assist authorities in implementing their monitoring strategies.     

Synthesis of a clinoptilolite-Fe system with high Cu sorption capacity

An iron oxide-clinoptilolite system was synthesized by adding natural clinoptilolite in an iron nitrate solution under strongly basic condition. The newly synthesized material has a red-brown color. A combination of XRD, FTIR and EPR spectroscopies, as well as specific surface area measurements and TG/DSC thermal analyses provided information on the type of Fe species located on the zeolite surface. Clinoptilolite seems to maintain its structure, while Fe(3+) species are in a symmetric environment (Th or Oh). The new material has a noteworthy high value of specific surface area (151 m(2)g(-1)) and is fully iron exchanged (Fe/Al=1.23). Differences in FTIR and TG/DSC spectrograms between the Fe-Clin system and untreated Clin were reported and explained. According to Cu adsorption/desorption experiments, carried out after the synthesis and characterization procedures, the Fe-Clin system is a promising new material since it adsorbs significantly larger Cu concentrations than clinoptilolite. This fact is owed to its high specific surface area and to its high negative surface charge. Desorption of Cu was also examined and it was observed that the Fe-Clin system desorbs smaller Cu amounts than untreated clinoptilolite.     

Long-Term Effects on Soil of the Disposal of Olive Mill Waste Waters (OMW)

Disposal of untreated olive mill waste waters (OMW) is a serious environmental problem in many Mediterranean countries. The aim of this work was to assess whether changes in soil properties have occurred due to direct disposal of raw OMW on soil and in evaporation ponds, and to investigate the potential fate and transport of pollutants after olive oil production had ceased. The results clearly showed that uncontrolled OMW disposal is a significant source of pollution to surface soil and waters. Disposal of OMW on soil greatly increased electrical conductivity (EC), available phosphorous (P), exchangeable potassium (K) and magnesium (Mg), organic matter, polyphenols, total and inorganic nitrogen (N), and available micronutrients mainly in surface soil layers. The presence of a high content of clay and carbonates in soil act as barriers and prevent downward transport of pollutants. Residual levels of total carbon (C), polyphenols, total and inorganic N, exchangeable K⁺, available P, iron (Fe), and copper (Cu) were also elevated even 8 years after mill closure. The long term disposal of OMW highlights the need to establish soil quality standards for soil parameters in order to identify soils affected by the disposal of OMW.