In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

Effect of phytohormones on the growth dynamics and macromolecular contents of two extreme halophilic Cyanobacteria (Phormidium sps)

Two non-heterocystous, filamentous solar saltern extreme halophilic cyanobacteria viz., Phormidium tenue and Phormidium fragile were allowed to grow in different concentrations of phytohormones. Among the phytohormones, Indole-3 acetic acid and Indole-3-butyric acid at 0. l ppm concentration enhanced the growth, pigments and carbohydrate content in P. fragile. The phycobiliprotein production was found higher at 0. l ppm concentration of Indole-3-acetic acid in P. tenue, whereas Indole-3-butyric acid at 50 ppm and 0. 1 ppm concentrations proved to be inhibitory in the protein and carbohydrate contents in P. tenue.     

Performance assessment of NAPL remediation in heterogeneous alluvium

Over the last few years, more than 40 partitioning interwell tracer tests (PITTs) have been conducted at many different sites to measure nonaqueous phase liquid (NAPL) saturations in the subsurface. While the main goal of these PITTs was to estimate the NAPL volume in the subsurface, some were specifically conducted to assess the performance of remedial actions involving NAPL removal. In this paper, we present a quantitative approach to assess the performance of remedial actions to recover NAPL that can be used to assess any NAPL removal technology. It combines the use of PITTs (to estimate the NAPL volume in the swept pore volume between injection and extraction wells of a test area) with the use of several cores to determine the vertical NAPL distribution in the subsurface. We illustrate the effectiveness of such an approach by assessing the performance of a surfactant/foam flood conducted at Hill Air Force Base, UT, to remove a TCE-rich NAPL from alluvium with permeability contrasts as high as one order of magnitude. In addition, we compare the NAPL volumes determined by the PITTs with volumes estimated through geostatistical interpolation of aquifer sediment core data collected with a vertical frequency of 5-10 cm and a lateral borehole spacing of 0.15 m. We demonstrate the use of several innovations including the explicit estimation of not only the errors associated with NAPL volumes and saturations derived from PITTs but also the heterogeneity of the aquifer sediments based upon permeability estimates. Most importantly, we demonstrate the reliability of the     

Metabolic dysregulation and inhibition of spermatogenesis by gibberellic acid in rat testicular cells

Enzymatic and histological change in the testicular cells of rats treated orally and intradermally for 45 days with gibberellic acid (GBA) in independent studies is reported. Assay of hexokinase (HK), acid phosphatase (AcP) and alkaline phosphatase (AkP) in rat testicular tissue homogenate preparations yielded results that suggested changes in these enzyme activities relative to their respective controls. Histological studies showed loss of germ cells, derangement of the germinal cells, and reduction in the size of the seminiferous tubules and dystrophy of Leydig cells. More importantly decreased sperm count in the lumen was observed. A dysregulatory role is thus established for GBA in rat testicular cell function. This compound may serve as an inhibitor of testicular cell function.     

The pattern of cadmium in the environment of five Minnesota cities

This paper reports on the cadmium results of a soil survey conducted by the State of Minnesota during the summer of 1986. The survey collected soil-dust trom the oldest census tracts of Minneapolis, St. Paul, Duluth, St. Cloud and Rochester. The results reveal fundamental differences in soil cadmium among cities. Soil cadmium exceeds 2 g g^–1 in 8.4% of the samples in Minneapolis, and 7.0, 4.0, 3.3 and 1.5% respectively of the samples collected in St. Paul, Duluth, St. Cloud and Rochester. Minneapolis and St. Paul residential houseside soil samples had cadmium levels that exceeded 2 g g^–1 in 24.5 and 21.2% respectively of the samples collected. By comparison, the Minneapolis and St. Paul residential streetside soil samples had cadmium levels that exceeded 2 g g^–1 in 1.2 and 0.6%, respectively, of the samples collected. Also the Minneapolis and St. Paul residential midyard soil samples had cadmium levels that exceeded 2 g g^–1 in 1.9 and 5.5%, respectively, of the samples collected. Cadmium levels for the combined data for all cities and communities in Minneapolis appears to be directly related to traffic flow. However, cadmium levels around housesides and in midyards do not follow patterns of traffic flow in the same manner as cadmium content of soils along streetsides. St. Paul has an anomalously high cadmium content toward the east of the city compared with the west side of the city. The Pigs Eye sewage sludge incinerator located east of the city is the most likely source of cadmium to cause this pattern. This study provides essential urban background information about both the fundamental environmental patterns of cadmium as well as processes which appear to operate to cause those patterns.     

Antimicrobial activity of tissue and associated bacteria from benthic sea anemone Stichodactyla haddoni against microbial pathogens

Associated bacteria from Stichodactyla haddoni are found maximum in tentacle tissues than the body tissue. There are eight associated bacterial species viz., Alcaligenes sp, Corynebacterium sp, Aeromonas sp, Sporosarcina sp, Renibacterium sp, Camobacterium sp1, Camobacterium sp2 and Salinococcus sp were recorded. The culture extracts from the associated bacterial species showed sensitivity against human bacterial and fungalpathogens. However, the hexane tissue extract of sea anemone showed maximum sensitivity (24 mm dia.) against the fish bacterial pathogen Aeromonas hydrophila than the other chosen pathogens. Comparatively the tissue extracts showed promising antimicrobial sensitivity than the cell free extracts of associated bacteria, and hence, the tissue samples from the sea anemone Stichodactyla haddoni is recommended for further exploration of novel antimicrobial drugs than the associated bacteria.     

Growth of Avicennia marina and Ceriops decandra seedlings inoculated with halophilic azotobacters

Inoculation of azotobacter has significant positive effects on the growth characteristics and pigments in mangrove seedlings of Avicennia marina and Ceriops decandra. The bacterial inoculation significantly increased the root dry biomass at the maximum of 75.8% at 30 gl(-1) salinity in Ceriops decandra. But in Avicennia marina, the shoot dry biomass was increased significantly at the maximum of 56.12% at 30 gl(-1) salinity in general, the Azotobacter beijerinkii improved the growth characteristics better in both species of mangroves preferably at higher salinity levels in A. marina and at a range of salinity in C. decandra. The results recommend this forraising vigorous seedlings under nursery conditions.     

Correlating the trends of COVID-19 spread and air quality during lockdowns in Tier-I and Tier-II cities of India—lessons learnt and futuristic strategies

Environmental Science and Pollution Research - The present study focuses on the impact of early imposed lockdowns and following unlocking phases on the status of air quality in six Tier-I and nine...     

Geochemistry of groundwater and groundwater prospects evaluation, Anekal Taluk, Bangalore Urban District, Karnataka, India

Anekal Taluk lies in the southern part of the of Bangalore urban district, known for Bannerghatta wildlife sanctuary, Jigani industrial estate, silk industry, and the electronics city, the pride of India and hub of Bangalore's information technology. In the present study, evaluation of geochemistry of 28 representative bore wells samples from Anekal Taluk was undertaken. It was found that most of the samples (92.9%) belong to Ca(2+?)-Mg(2+?)-Cl(?-?) -SO2??water type with Ca-Mg-Cl and Ca-Cl hydrochemical facies. The groundwater sources were further categorized as normal chloride (32.14%) and normal sulfate (100%) water types based on Cl and SO(4) concentrations. Majority of the samples (64.3%) belong to C3-S1 water class, indicating water with high salinity and low sodium. Positive index of base exchange indicates the chloro-alkaline equilibrium in the study area. Groundwater potential zonation map for Anekal Taluk was generated using multiparametric and weighted overlay method using the spatial analyst tool in ArcGIS v9.2. Accordingly, five distinct classes corresponding to good(high), moderate (medium), moderate to poor (low), poor (very low), and poor to nil (very low) groundwater potential zones were identified in the region. Of this, 85.27% of the study area belongs to good/high to moderate/medium groundwater potential and only 14.73% belonging to moderate/poor to nil groundwater potential zones.