Impacts of repeated timber skidding on the chemical properties of topsoil, herbaceous cover and forest floor in an eastern beech (Fagus orientalis Lipsky) stand

In this study, long-term timber skidding effects on herbaceous understory forest floor and soil were investigated on a skid road in a stand of the eastern beech (Fagus orientalis Lipsky). For this purpose, herbaceous understory forest floor and soil samples were collected from the skid road and from an undisturbed area used as a control plot. The mass (kg ha(-1)) of herbaceous and forest floor samples was determined, and soil characteristics were examined at two depths (0-5 cm and 5-10 cm). We quantified sand, silt and clay content, as well as bulk density compaction, pH, and organic carbon content in soil samples. The quantities of N, K, P, Na, Ca, Mg, Fe, Mn, Zn and Cu were determined in all herbaceous cover forest floor and soil samples. The quantities of Na, Fe, Zn, Cu and Mn in herbaceous understory samples from the skid road were considerably higher than those in the undisturbed area, while the quantity of Mg was considerably lower. These differences could have been caused by decreased herbaceous cover in addition to variations in the properties of the forest floor and soil after skidding. A lower amount of forest floor on the skid road was the result of skidding and harvesting activities. Mg and Zn contents in forest floor samples were found to be considerably lower for the skid road than for the undisturbed area. No significant differences were found in soil chemical properties (quantities of N, P, K, Na, Ca, Mg, Fe, Zn, Cu and Mn) at the 0-5 cm soil depth. Important differences exist between soil quantities of Mg at a 5-10 cm depth on the skid road and in undisturbed areas. Both 0-5 cm and 5-10 cm soil depths, the average penetrometer resistance values for the skid road was higher than for the undisturbed area. This result shows that the compaction caused by skidding is maintained to depth of 10 cm. Skid road soil showed higher bulk density values than undisturbed areas because of compaction.     

Soil properties and root biomass responses to prescribed burning in young Corsican pine (Pinus nigra Arn.) stands

Fire is an important tool in the management of forest ecosystems. Although both prescribed and wildland fires are common in Turkey, few studies have addressed the influence of such disturbances on soil properties and root biomass dynamics. In this study, soil properties and root biomass responses to prescribed fire were investigated in 25-year-old corsican pine (Pinus nigra Arn.) stands in Kastamonu, Turkey. The stands were established by planting and were subjected to prescribed burning in July 2003. Soil respiration rates were determined every two months using soda-lime method over a two-year period. Fine (0-2 mm diameter) and small root (2-5 mm diameter) biomass were sampled approximately bimonthly using sequential coring method. Mean daily soil respiration ranged from 0.65 to 2.19 g Cm(-2) d(-1) among all sites. Soil respiration rates were significantly higher in burned sites than in controls. Soil respiration rates were correlated significantly with soil moisture and soil temperature. Fine root biomass was significantly lower in burned sites than in control sites. Mean fine root biomass values were 4940 kg ha(-1) for burned and 5450 kg ha(-1) for control sites. Soil pH was significantly higher in burned sites than in control sites in 15-35 cm soil depth. Soil organic matter content did not differ significantly between control and burned sites. Our results indicate that, depending on site conditions, fire could be used successfully as a tool in the management of forest stands in the study area.     

Effect of Benzene on liver functions in rats (Rattus norvegicus)

Rats (Rattus norvegicus) were intraperitoneally injected with a 100 mg kg(-1) dosage of benzene, a toxic and carcinogenic agent widely used for industrial purposes. Changes in lactate dehydrogenase (LDH), alkaline phosphatase (ALP), alanine amino transferase (ALT), aspartate amino transferase (AST) activities in serum of rats were investigated at 2, 4, 8, 16, 32, and 64 h following injection. Serum physiological was administered to control group. Activities were measured using autoanalyzer. Benzene caused significant activations in LDH, ALP, and AST activities in the serum at some test hours (p < 0.05). When compared with the control groups, although an increase occurred in ALT activity, it was seem that this increase wasn't significant (p > 0.05).     

Mycotoxin levels and incidence of mould in Turkish rice

One hundred unpackaged rice samples, each weighing 500 g, were randomly collected at retail stores and open markets in the largest rice growing area (Thrace) in Turkey and analysed for mould counts, predominant mould genera, moisture content and mycotoxin levels. Mould counts ranged from 1.0 × 10¹ to 1.5 × 10⁴ cfu/g in 70 of 100 samples, and the correlation between moisture content and mould count was significant (p????0.05). Aspergillus spp. and Penicillium spp., potential mycotoxin producers, were the dominant moulds. In one area from which samples were collected, the mycotoxin content of rice was found to be positively correlated with moisture content; samples with higher moisture also contained higher numbers of moulds. The levels of total aflatoxins, aflatoxin B1 and ochratoxin A were higher than the maximum tolerable limits (4, 2 and 3 ??g/kg, according to the EC Regulation and the Turkish Food Codex) for 32, 14 and 30 of 100 rice samples, respectively. This is the first comprehensive report of ochratoxin A levels in rice grown in Thrace, Turkey.     

River water quality management model using genetic algorithm

Conventional mathematical programming methods, such as linear programming, non linear programming, dynamic programming and integer programming have been used to solve the cost optimization problem for regional wastewater treatment systems. In this study, a river water quality management model was developed through the integration of a genetic algorithm (GA). This model was applied to a river system contaminated by three determined discharge sources to achieve the water quality goals and wastewater treatment cost optimization in the river basin. The genetic algorithm solution, described the treatment plant efficiency, such that the cost of wastewater treatment for the entire river basin is minimized while the water quality constraints in each reach are satisfied. This study showed that genetic algorithm can be applied for river water quality modeling studies as an alternative to the present methods.     

Exergetic Sustainability Indicators as a Tool in Commercial Aircraft: A Case Study for a Turbofan Engine

This paper focuses on the exergetic sustainability indicators of a medium-range commercial aircraft engine for constant reference environment and ground running conditions. First, a detailed exergy analysis of turbofan engine have been performed based on engine test cell parameters. Starting from the sustainability considerations and the second law of the thermodynamics, the paper presents six exergy-based sustainability indicators. The indicators of the turbofan engine developed here in conjunction with exergetic analysis and sustainable development are exergy efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy rate, environmental effect factor, and exergetic sustainability index. The investigated sustainable indicators have been calculated by using exergy analysis outputs for aircraft ground running condition. Results from this study show that values of exergy efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy rate, environmental effect factor, and exergetic sustainability index of investigated turbofan engine are found to be 0.315, 0.685, 0.408, 0, 2.174, and 0.460, respectively. These parameters are expected to quantify how the turbofan engine and aircraft become more environmentally benign and sustainable.     

Root biomass and carbon storage in oriental spruce and beech stands in Artvin, Turkey

In this study, influence of slope position (south-facing vs. north-facing), species type and sampling time on fine (0-2 mm), small (2-5 mm) and coarse (5-10 mm) root biomass and carbon storage of oriental spruce (Picea orientalis) and oriental beech (Fagus orientalis) were investigated. Mean total root biomass of oriental spruce was 20160 kg ha(-1) in south-facing slopes and 17140 kg ha(-1) in north-facing slopes. Mean total belowground C storage of oriental spruce was 7861 kg ha(-1) in south-facing slopes and 6840 kg ha(-1) in north-facing slopes. Similarly, biomass and C storage of oriental beech were 17190 and 6690 kg ha(-1) in south-facing slopes, and 13260 and 5200 kg ha(-1) in north-facing slopes, respectively. Oriental spruce had significantly higher fine root biomass than did oriental beech in south-facing slopes. Fine root biomass was significantly higher in fall than in spring in south-facing slopes.     

A very sensitive flow-injection spectrophotometric determination method for iron (II) and total iron using 2′, 3, 4′, 5, 7-pentahydroxyflavone

In this study, an ultra-sensitive and highly selective, rapid flow-injection spectrophotometric method for the determination of iron (II) and total iron has been proposed. The method was based on the reaction between iron (II) and 2′, 3, 4′, 5, 7-pentahydroxyflavone in slightly acidic solution with a strong absorption at 415 nm. The carrier solution used was 1?×?10^?5 M 2′, 3, 4′, 5, 7-pentahydroxyflavone in 0.1 M HAc/Ac^? buffer solution at pH 4.5. Parameters that affect simultaneously the determination of iron (II) and interfering ions were tested. The relative standard deviation for the determination of 50 μg L^?1 iron (II) was 0.85 % (n?=?10), and the limit of detection (blank signal plus three times the standard deviation of the blank) was 3 μg L^?1, both based on injection volumes of 20 μL. The method has been successfully applied to the determination of iron (II) and total iron in water samples and ore samples. The method was verified by analysing a certified reference material Zn/Al/Cu 43XZ3F.     

On the sedimentary occurrence of chlorophyllone a

The 13(2),17(3)-cyclopheophorbide a enol (CPP) is shown to convert mainly to a approximately 1:1 mixture of (13(2)R/S) chlorophyllones a (Chlone), when chromatographed over silica gel or alumina supports. 15(1)-hydroxychlorophyllonelactone a and some other chlorophyll a related compounds are also tentatively identified as minor transformation products of CPP. This raises the possibility that the chlorophyllones reported in recent sediments may be analytical artifacts from CPP. However, data for the surface sediments from Lake Motte as well as literature data for other contemporary sediments show that, (i) they are not artifacts, (ii) considering that CPP is the intermediate compound in the formation of chlorophyllones from chlorophyll a, the hydroxylation of CPP in the sedimentary environment involves an enzymatic process leading preferentially to 13(2)S chlorophyllone a.