Prenatal diagnosis of abdominal cystic hygroma

We present a case of fetal abdominal cystic hygroma that presented at 19 weeks of gestation. Ultrasonographic evaluation of the fetus revealed soft tissue enlargement of the left leg and a retroperitoneal mass in the left pelvis and abdomen. This represents the first reported case of prenatal diagnosis of abdominal cystic hygroma.     

Catchment-Wide Wetland Assessment and Prioritization Using the Multi-Criteria Decision-Making Method TOPSIS

It is widely accepted that wetland ecosystems are under threat worldwide. Many communities are now trying to establish wetland rehabilitation programs, but are confounded by a lack of objective information on wetland condition or significance. In this study, a multi-criteria decision-making method, TOPSIS (the Technique for Order Preference by Similarity to Ideal Solution), was adapted to assist in the role of assessing wetland condition and rehabilitation priority in the Clarence River Catchment (New South Wales, Australia). Using 13 GIS data layers that described wetland character, wetland protection, and wetland threats, the wetlands were ranked in terms of condition. Through manipulation of the original model, the wetlands were prioritized for rehabilitation. The method offered a screening tool for the managers in choosing potential candidate wetlands for rehabilitation in a region.     

Evaluation of Regenerative-air Vacuum Street Sweeping on Geological Contributions to PM10

Street sweeping is often proposed as a means of reducing the emissions from paved roads. The objective of this study was to evaluate the effectiveness of street sweeping on ambient particulate matter concentrations and to determine the difference In source contributions to PM10 concentrations between street sweeping and non-street sweeping periods.

Chemically-speciated measurements of PM10 and PM2.5 were taken in the commercial section of Reno, Nevada, for a one-month sampling period. The Chemical Mass Balance (CMB) model was applied to these data and an average of approximately 50 percent of the PM10 was apportioned to resuspended geological material. During half of the sampling period, streets In the vicinity of the sampling site were completely swept with a regenerative-air vacuum sweeper, while no sweeping was performed during the remainder of the experiment. Ratios of primary geological contributions divided by primary motor vehicle contributions to PM10 were compared between sweeping and non-sweeping periods using analysis of variance. This ratio of source contributions minimizes the effects of variations in traffic volume and meteorological dispersion. No significant differences in geological contributions to PM10 were detected as a result of regenerative-air vacuum street sweeping.     

Cadmium kinetics in oysters — a comparative study of Crassostrea gigas and Ostrea edulis

The accumulation of cadmium was investigated in two species of oysters [Crassostrea gigas (L.) and Ostrea edulis (L.)] from the same environment and in oysters of the same species (O. edulis) from two different environments (contaminated and uncontaminated), under controlled laboratory conditions (33‰ salinity, 10°C, 100 μg Cd l^-1) for up to 111 d in 1982. C. gigas accumulated cadmium twice as fast as O. edulis (1.07 vs 0.52 μg Cd g^-1 wet wt d^-1). Furthermore, O. edulis from an uncontaminated environment accumulated cadmium faster than O. edulis from a metal-contaminated environment (0.52 vs 0.34 μg Cd g^-1 wet wt d^-1). There was no effect of cadmium exposure on total soft-tissue copper and zinc concentrations. Investigation of cytosolic metal-binding using Sephadex G-75 gel-permeation chromatography indicated that binding to very low molecular weight ligands (MW<1000) accounted for>70% of the cytosolic zinc in all oysters and>40% of the cytosolic cadmium in all oysters except O. edulis from Conwy at 83 d. In copper-contaminated oysters, excess copper was also associated with very low molecular weight ligands. Intermediate molecular weight cadmium/copper-binding proteins (similar to metallothionein in molecular weight) were observed in the cytosol and were shown to differ between species in terms of their behavior on Sephadex G-75. Finally, the distribution of accumulated cytosolic cadmium in O. edulis from the contaminated environment was shown to have a unique distribution, i.e., there was no cadmium associated with high molecular weight cytosolic macromolecules. The data indicate that both genetic and environmental factors influence cadmium accumulation in oysters.     

Driver speed selection on high-speed two-lane highways: Comparing speed profiles between uniform and differential speed limits

Objective: Although a considerable amount of prior research has investigated the impacts of speed limits on traffic safety and operations, much of this research, and nearly all of the research related to differential speed limits, has been specific to limited access freeways. The unique safety and operational issues on highways without access control create difficulty relating the conclusions from prior freeway-related speed limit research to 2-lane highways, particularly research on differential limits due to passing limitations and subsequent queuing. Therefore, the objective of this study was to assess differences in driver speed selection with respect to the posted speed limit on rural 2-lane highways, with a particular emphasis on the differences between uniform and differential speed limits.

Methods: Data were collected from nearly 59,000 vehicles across 320 sites in Montana and 4 neighboring states. Differences in mean speeds, 85th percentile speeds, and the standard deviation in speeds for free-flowing vehicles were examined across these sites using ordinary least squares regression models.

Results: Ultimately, the results of the analysis show that the mean speed, 85th percentile speed, and variability in travel speeds for free-flowing vehicles on 2-lane highways are generally lower at locations with uniform 65 mph speed limits, compared to locations with differential limits of 70 mph for cars and 60 mph for trucks.

Conclusions: In addition to posted speed limits, several site characteristics were shown to influence speed selection including shoulder widths, frequency of horizontal curves, percentage of the segment that included no passing zones, and hourly volumes. Differences in vehicle speed characteristics were also observed between states, indicating that speed selection may also be influenced by local factors, such as driver population or enforcement.     

A Screening Procedure for Identifying Acid-Sensitive Lakes from Catchment Characteristics

Monitoring of Wilderness lakes for potential acidification requires information on lake sensitivity to acidification. Catchment properties can be used to estimate the acid neutralizing capacity (ANC) of lakes. Conceptual and general linear models were developed to predict the ANC of lakes in high-elevation (2170 m) Wilderness Areas in Californias Sierra Nevada mountains. Catchment-to-lake area ratio, lake perimeter-to-area ratio, bedrock lithology, vegetation cover, and lake headwater location are significant variables explaining ANC. The general linear models were validated against independently collected water chemistry data and were used as part of a first stage screen to identify Wilderness lakes with low ANC. Expanded monitoring of atmospheric deposition is essential for improving the predictability of lake ANC.     

Infrared analysis for counterfeit electronic parts detection and supply chain validation

Within the electronics industry, counterfeit electronic components entering the supply chain have steadily become an increasing threat accounting for more than 8 % of global merchandise trade and an annual $600 billion enterprise. Currently, there are not many cost-effective and nonintrusive solutions for counterfeit detection of electronic parts. In this paper, the authors present a statistical approach for detecting counterfeit components based on infrared (IR) analysis by the use of independent component analysis (ICA). As a prominent higher-order statistical analysis technique, ICA is capable of extracting relevant features from IR data. The latest applications and the extended algorithms of ICA have been elucidated for the purposes of classification and identification of counterfeit electronic parts. The theoretical framework of ICA is presented along with extensive experimental results to illustrate its feature extraction function in counterfeit electronic parts detection.     

An examination of the factorial,construct, and predictive validity and utility of the regulatory focus at work scale

Although interest in regulatory focus research continues to grow, there has been very little work to date on the assessment and usefulness of regulatory focus in the workplace. The present research effort reports the results of a series of studies designed to assess the validity and utility of the Regulatory Focus at Work Scale (RWS). The results indicate that the RWS is reliable, valid, and showed incremental validity beyond general and trait‐like measures of regulatory focus in predicting relevant work outcomes of task performance, citizenship performance, safety performance, and productivity performance. The overall results of these studies support our claims that the RWS shows utility in predicting workplace outcomes and should prove useful for future research on regulatory focus in the workplace. Copyright © 2008 John Wiley & Sons, Ltd.     

The path(s) to employee trust in direct supervisor in nascent and established relationships: A fuzzy set analysis

While many of the propositions advanced by Mayer, Davis, and Schoorman's (1995) integrative model of interpersonal trust have been supported empirically, we still know little about how time impacts the relative importance of the model's elements. In addition, there may be situations in which trust can develop with lesser degrees of any of the trustworthiness facets or propensity to trust. Hence, we apply a configurational set‐theoretic perspective to examine what combinations will be sufficient to produce the presence of trust in a direct supervisor across nascent and established relationships. We find three distinct configurations associated with trust in supervisor, which allows us to elaborate theory and provide novel insights to trust research. In particular, we find that in both nascent and established relationships, perceptions of high supervisor ability, benevolence, and integrity constitute a sufficient configuration for high trust in supervisor. In established relationships, however, there were two paths to high trust in supervisor: (i) perceptions of high supervisor ability and integrity, or (ii) perceptions of high supervisor ability and benevolence, accompanied by high propensity to trust. As such, in established relationships, perceptions of high supervisor benevolence and high propensity to trust may be substitutable with perceptions of high supervisor integrity. Copyright © 2016 John Wiley & Sons, Ltd.