A modified computer hazard and operability study procedure

The application of modifications of the hazard and operability study method (Hazop) to process facilities using computer-based control systems has led to the development of computer Hazop (Chazop) procedures. A number of the Chazop procedures cited in the literature broaden the method and depart from the base documentation of the Hazop method. It is suggested that a robust Chazop method requires implementation at the line-by-line level of detail and as a separate, complementary study using the same base documentation (piping and instrumentation diagrams) as that used in the Hazop method.     

The challenges of sustainability in mining regions: The coal mining region of Santa Catarina, Brazil

Throughout history, mining communities have invariably found themselves striving for a good quality of life and a long‐term future. In the 21st century, problems of maintaining the economic vitality of mining regions are now compounded by concerns about the biophysical integrity of the local environment. In regions of the world where the economic viability of the resource is marginal and achieving a reasonable quality of life is a daily struggle, sustainable mining may seem to be a dubious prospect at best. Yet the twin imperatives of global political forces and burgeoning environmental concerns are requiring industry, governments and other interests to re‐conceptualize the way in which mining takes place in communities. Although mining itself may not be seen as an industry that contributes to the achievement of environmental objectives, it could — with careful planning — be used as a tool to foster a more sustainable and healthier community. This argument is considered in the context of the coal mining region of Santa Catarina, Brazil.     

Heavy metal and Pb isotopic compositions of aquatic organisms in the Pearl River Estuary, South China

The accumulation of trace metals in aquatic organisms may lead to serious health problems through the food chain. The present research project aims to study the accumulation and potential sources of trace metals in aquatic organisms of the Pearl River Estuary (PRE). Four groups of aquatic organisms, including fish, crab, shrimp, and shellfish, were collected in the PRE for trace metal and Pb isotopic analyses. The trace metal concentrations in the aquatic organism samples ranged from 0.01 to 2.10 mg/kg Cd, 0.02 to 4.33 mg/kg Co, 0.08 to 4.27 mg/kg Cr, 0.15 to 77.8 mg/kg Cu, 0.17 to 31.0 mg/kg Ni, 0.04 to 30.7 mg/kg Pb, and 8.78 to 86.3 mg/kg Zn (wet weight). High concentrations of Cd were found in crab, shrimp and shellfish samples, while high concentration of Pb was found in fish. In comparison with the baseline reference values in other parts of the world, fish in the PRE had the highest elevated trace metals. The results of Pb isotopic compositions indicated that the bioaccumulation of Pb in fish come from a wide variety of food sources and/or exposure pathways, particularly the anthropogenic inputs.     

Evaluation of leaching and extraction procedures for soil and waste

Laboratory leaching tests may be used for source term determination as a basis for risk assessment for soil-groundwater pathways on contaminated sites. In order to evaluate different leaching procedures, batch extraction tests and percolation tests were performed using three reference materials produced from contaminated soil, demolition waste and municipal solid waste incinerator bottom ash. Emphasis was placed on the investigation of the leachability of the heavy metals copper and chromium, polycyclic aromatic hydrocarbons (PAHs) and the anions chloride and sulfate. Significant discrepancies between column experiments and batch/extraction tests were found for the release of PAHs and to a lesser extent for the heavy metals Cu and Cr. Additionally interlaboratory comparisons were conducted based on different leaching tests with the reference materials and evaluated using the criteria of comparability and reproducibility. The best reproducibility was achieved for all investigated substances in column tests. The reproducibility of batch tests was acceptable except for PAHs. The results from the experimental work will help establish standardized and feasible laboratory procedures as fundamental for substance specific risk assessment of contaminated sites.     

Extractability of elements in sugar maple xylem along a gradient of soil acidity

Dendrochemistry has been used for the historical dating of pollution. Its reliability is questionable due primarily to the radial mobility of elements in sapwood. In the present study, the extractability of seven elements was characterized to assess their suitability for the monitoring of environmental conditions. Nine mature sugar maple trees (Acer saccharum Marsh.), a wide-ranging species in eastern North America that has suffered decline in past decades, were sampled in three Quebec watersheds along a soil acidity gradient. Five-year groups of annual tree rings were treated by sequential chemical extractions using extractants of varying strength (deionized H2O, 0.05 M HCl, and concentrated HNO(3)) to selectively solubilize the elements into three fractions (water-soluble, acid-soluble, and residual). Monovalent K; divalent Ba, Ca, Cd, Mg, Mn; and trivalent Al cations were found mostly in the water-soluble, acid-soluble, and residual fractions, respectively. Forms more likely to be mobile within the tree (water-soluble and acid-soluble) do not seem to be suitable for temporal monitoring because of potential lateral redistribution in sapwood rings. However, certain elements (Cd, Mn) were responsive to current soil acidity and could be used in spatial variation monitoring. Extractability of Al varied according to soil acidity; at less acidic sites, up to 90% of Al was contained in the residual form, whereas on very acidic soils, as much as 45% was found in the water-soluble and acid-soluble fractions. Sequential extractions can be useful for determining specific forms of metals as key indicators of soil acidification.     

Environmental degradation by mud in tropical estuaries

In wet tropical countries, the intense rainfall and the lack of effective restrictions on human activities in the river catchment leads to increased rates of soil erosion. This has increased the sediment loads many times over from the natural level. As a result, estuarine and coastal waters are becoming increasingly muddy with associated losses for society in terms of increased flooding and a degradation of the environment, the fisheries and the economic use of these waters. It is suggested that science-based models be used to predict the fate of mud in estuaries and coastal waters when planning development in river catchments, particularly in wet tropical countries. This would help integrate land and water management. Modelling technology is demonstrated by a combination of field and model studies in four turbid tropical estuaries, namely the Fly River in Papua New Guinea, the Mekong River in Vietnam, the Cimanuk River in Indonesia, and Hinchinbrook Channel in Australia. The final model is adapted to local conditions and extensively uses data assimilation especially for open boundary conditions. There can be a feedback between the hydrodynamics and the mud dynamics when the system silts; in wet tropical countries this can occur rapidly, sometimes in only 30 years. Electronic Publication     

The use of technology to address patterns of risk among teenage drivers

INTRODUCTION: The crash risk of teens is high, with fatal crash rates of teen drivers higher than any other age group. New approaches to reduce teen traffic fatalities are clearly needed. METHOD: A possible approach to reduce the incidence of teen driver crashes and fatalities is through the use of vehicle-based intelligent driver support systems. To be most effective, the system should address the behaviors associated with an overwhelming number of teen fatal crashes: speed, low seatbelt use, and alcohol impairment. In-vehicle technology also offers an opportunity to address the issue of inexperience through enforcement of certain Graduated Driver's License provisions. RESULTS: To fully understand the capability of such technologies, there should be a concerted effort to further their development, and human factors testing should take place to understand their effects on the driver. IMPACT: If successfully implemented, a Teen Driver Support System (TDSS), such as the one described here, could significantly decrease the number of teens killed in traffic crashes.     

Photochemical Smog Modelling Using the Air Pollution Chemical Transport Model (TAPM-CTM) in Ho Chi Minh City,Vietnam

Environmental Modeling & Assessment - This paper describes the application of the air pollution model (TAPM-CTM) for photochemical airshed modelling in the Ho Chi Minh region. The model was...     

A validated 2-D diffusion–advection model for prediction of drift from ground boom sprayers

Correct field drift prediction is a key element in environmental risk assessment of spraying applications. A reduced order drift prediction model based on the diffusion–advection equation is presented. It allows fast assessment of the drift potential of specific ground boom applications under specific environmental wind conditions that obey the logarithmic wind profile. The model was calibrated based on simulations with a validated Computational Fluid Dynamics (CFD) model. Validation of both models against 38 carefully conducted field experiments is successfully performed for distances up to 20 m from the field edge, for spraying on flat pasture land. The reduced order model succeeded in correct drift predictions for different nozzle types, wind velocities, boom heights and spray pressures. It used 4 parameters representing the physical aspects of the drift cloud; the height of the cloud at the field edge, the mass flux crossing the field edge, the settling velocity of the droplets and the turbulence. For the parameter set and range considered, it is demonstrated for the first time that the effect of the droplet diameter distribution of the different nozzle types on the amount of deposition spray drift can be evaluated by a single parameter, i.e., the volume fraction of droplets with a diameter smaller than 191 μm. The reduced order model can be solved more than 4 orders of magnitude faster than the comprehensive CFD model.