土壤有机物污染控制标准制订的方法学研究

指出了中国现行土壤环境质量标准存在的问题.对日本和美国等发达国家的有机物污染土壤质量控制标准进行了分析.从土壤环境质量基准制订的方法学和污染控制标准的确定原则上,提出了制订中国土壤有机物污染控制标准的建议.     

深圳市纯电动泥头车减污降碳协同效益评价研究

新能源汽车替代传统燃油车是减缓能源与环境压力并如期实现“双碳”目标的重要途径,但在重型车辆、工程车等领域推广较为缓慢.深圳市自2019年开始推广使用纯电动泥头车,并计划到2025年新能源环卫、泥头车数量达到8000辆.为深入探究纯电动泥头车替代柴油泥头车所产生的减污降碳协同效益,本研究基于一手调研数据,采用生命周期评价方法并结合GREET模型,对比分析了两类泥头车在燃料周期、车辆周期和配套设施周期3个周期内的能耗、主要空气污染物及碳排放情况.结果表明,纯电动泥头车全生命周期内能耗较柴油泥头车可减少36.2%,主要污染物如NO_x、SO₂、VOC和PM_2.5降幅分别达81.3%、37.8%、29.0%和25.9%;温室气体(GHGs)排放强度减少14.4%,基准情境下2030年和2050年推广纯电动泥头车GHGs累计减排量分别为71.4万t和258.5万t.尽管节能减排效果显著,但其初始购置和售后维保成本过高是制约其推广的最主要因素,通过降低车辆及电池生产制造成本、提高充换电设施数量及售后维保能力等有望加快泥头车纯电动化.     

基于加热改性预处理废线路板的热力学作用过程研究

电子废物是固体废物环境管理的热点问题,而废线路板是电子废物的研究核心.废线路板是由铜箔、树脂和增强材料层压而成的复合材料,以破碎和分选过程相组合的机械物理方法是其资源化回收处理的主流技术,就如何提高破碎效果已成为机械物理技术发展面临的难题.研究提出了加热改性预处理的技术方法,用于废线路板结构物理改性和微观破坏,以提高破碎解离效率,其可实现金属与非金属的高度解离.基于改性处理技术,本文还分别从微观和宏观破坏力学角度,探究了加热改性处理机制.同时,结合ANSYS有限元热应力模型,对改性作用进行了理论分析.     

Thermal cracking of waste printed wiring boards for mechanical recycling by using residual steam preprocessing

Mechanical waste-processing methods, which combine crushing and separation processes for the recovery of valuable materials, have been widely applied in waste printed wiring board (PWB) treatment. However, both the high impact toughness and the tensile and flexural strengths of whole PWB with a laminated structure result in great energy consumption and severe abrasion of the cutters during multi-level crushing. In addition, the high temperatures occurring in continual crushing probably cause the decomposition of the polymer matrix. A thermal-crack method using residual steam as the heating medium has been developed to pre-treat waste PWBs. This treatment reduces the mechanical strength in order to improve the recovery rate of valuable materials in subsequent mechanical recycling. The changes of the PWBs’ macro-mechanical properties were studied to evaluate thermal expansion impacts associated with changes in temperature, and the dynamic dislocation micro-structures were observed to identify the fracture mechanism. The results showed that thermal cracking with steam at the temperature of 500 K can effectively attenuate the mechanical properties of waste PWBs, by reducing the impact, tensile and flexural strengths respectively, by 59.2%, 49.3% and 51.4%, compared to untreated PWB. Thermal expansion can also facilitate the separation of copper from glass fiber by reducing peel resistance by 95.4% at 500 K. It was revealed that the flexural fracture was a transverse cracking caused by concentrated stress when the heating temperature was less than 500 K, and shifted to a vertical cracking after exceeding 500 K.     

华南滨海小流域降雨入渗对地下水的补给分析

以华南滨海小流域——中山大学滨海水循环试验基地(试验基地)作为研究区,在对该流域地下水和雨水分别进行采样、实验分析的基础上,利用氯量平衡法(CMB)与地下水动态法计算了该流域的降雨入渗补给系数与给水度。研究发现,试验基地地下水主要受降雨补给,地下水埋深在雨季(4—9月)、旱季(10—3月)的变动范围大致为0～1.5 m与0～0.5 m。根据CMB计算结果,补给区、中间区雨季降雨入渗补给系数分别为旱季的1.3～1.6倍和1.3～2.0倍,且补给区大于中间区(M5井除外)。利用地下水动态法计算次降雨入渗补给系数,所得雨季、旱季的均值(7.6%和4.6%)与CMB计算结果(7.7%和5.3%)较为接近。给水度、雨强与入渗补给系数均存在一定的线性关系。将地下水埋深分别与降雨入渗补给量及潜水蒸发量进行多项式拟合对比,发现降雨入渗对地下水的最大入渗补给埋深约为2.3 m,当埋深为3.1 m时,地下水可获得最大净补给量。     

危险废物分级管理方法研究

危险废物因具有毒性、易燃性、腐蚀性和反应性等多种危害特性,如果暴露于环境中将会对人类健康和生态环境造成很大威胁.深入分析了欧美等一些国家对危险废物进行分级管理的方法,针对中国目前危险废物的产生现状和管理现状,提出了综合考虑危险废物的产生量和活性大小等各个方面,借助风险评价对危险废物进行分级管理的方法和原则,以及相应的分级管理程序的建议,为完善中国的危险废物管理体系提供参考.     

Differences of methods to quantify construction and demolition waste for less-developed but fast-growing countries: China as a case study

Environmental Science and Pollution Research - As China and other developing countries continue to urbanize over the next decades, construction and demolition waste (CDW) management has been...