Lateral migration and offsite surface emission of landfill gas at City of Montreal Landfill Site

An evaluation of lateral landfill gas migration was carried out at the Saint-Michel Environmental Complex in Montreal, City of Montreal Landfill Site, Canada, between 2003 and 2005. Biogas concentration measurements and gas-pumping tests were conducted in multilevel wells installed in the backfilled overburden beside the landfill site. A migration event recorded in autumn 2004 during the maintenance shutdown of the extraction system was simulated using TOUGH-LGM software. Eleven high-density instantaneous surface monitoring (ISM) surveys of methane were conducted on the test site. Gas fluxes were calculated by geostatistical analyses of ISM data correlated to dynamic flux chamber measurements. Variograms using normal transformed data showed good structure, and kriged estimates were much better than inverse distance weighting, due to highly skewed data. Measurement-based estimates of yearly off-site surface emissions were two orders of magnitude higher than modelled advective lateral methane flux. Nucleodensimeter measurements of the porosity were abnormally high, indicating that the backfill was poorly compacted. Kriged porosity maps correlated well with emission maps and areas with vegetation damage. Pumping tests analysis revealed that vertical permeability was higher than radial permeability. All results suggest that most of the lateral migration and consequent emissions to the atmosphere were due to the existence of preferential flow paths through macropores. In December 2006, two passively vented trenches were constructed on the test site. They were successful in countering lateral migration.     

Split-hand/split-foot malformation with paternal mutation in the p63 gene

We report the prenatal diagnosis at 16 weeks' gestation of bilateral split-hand/split-foot malformation (SHSFM) with severe lobster claw deformity of hands and feet in a male fetus without associated malformations. A minor manifestation of SHSFM was present in the father with only mild bilateral foot involvement (syndactyly I–II; cleft II–III; left cutaneous syndactyly III–IV). Mutation analysis of the p63 gene on chromosome 3q27 showed a missense mutation 577A→G (predicting amino acid substitution K193E) in the father. This mutation has not been reported so far in SHSFM but resembles the previously reported 580A→G (predicting amino acid substitution K194E) in a family with SHSFM. Copyright © 2001 John Wiley & Sons, Ltd.     

Solid-phase microextraction to monitor the sonochemical degradation of polycyclic aromatic hydrocarbons in water

Solid-phase microextraction (SPME) coupled with GC-MS has been used to monitor the degradation of polycyclic aromatic hydrocarbons (PAHs) by ultrasound treatment. Immersion SPME sampling enabled the fast and solventless extraction of target contaminants at the low microg l(-1) concentration level. The developed protocol was found to be linear in the concentration range from 0.1 to 50 microg l(-1) for most target analytes, with the limits of detection ranging between 0.01 and 0.70 microg l(-1) and the relative standard deviations between 4.31 and 27%. The developed SPME protocol was used to follow concentration profiles of aqueous solutions containing 16 PAHs, which were subject to low frequency ultrasonic irradiation. At the conditions employed in this study (80 kHz of ultrasound frequency, 130 W l(-1) of applied electric power density, 30 microg l(-1) of initial concentration for each of the 16 PAHs), sonochemical treatment was found capable of destroying the lower molecular weight PAHs (naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene and pyrene) within 120-180 min of irradiation. The higher molecular weight PAHs were more recalcitrant to ultrasound treatment.     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

The indirect involvement of buses in traffic accident processes

The involvement of buses in accidents usually is assessed implicitly on the basis of the direct involvement of the bus in the collision or in injury production. This paper deals with the scope and forms of indirect involvement of buses (as a sight obstruction, for example). Accidents were selected by identifying the presence of the term ‘bus’ or synonyms in the text parts of complete police reports (testimonies, statements by the persons involved, etc.) available in electronic form, then analysed in detail. Direct or indirect involvement of a bus is found in 3.6% of traffic injury accidents reported by the police in the community studied (direct involvement: 1.4%; indirect involvement: 2.2%). The different forms of indirect involvement are then described, and some possibilities of preventive measures are discussed.     

Can we infer avalanche–climate relations using tree-ring data? Case studies in the French Alps

Dendrogeomorphology is a powerful tool to determine past avalanche activity, but whether or not the obtained annually resolved chronologies are sufficiently detailed to infer avalanche–climate relationships (in terms of temporal resolution) remains an open question. In this work, avalanche activity is reconstructed in five paths of the French Alps and crossed with a set of snow and weather variables covering the period 1959–2009 on a monthly and annual (winter) basis. The variables which best explain avalanche activity are highlighted with an original variable selection procedure implemented within a logistic regression framework. The same approach is used for historical chronologies available for the same paths, as well as for the composite tree-ring/historical chronologies. Results suggest that dendrogeomorphic time series allow capturing the relations between snow or climate and avalanche occurrences to a certain extent. Weak links exist with annually resolved snow and weather variables and the different avalanche chronologies. On the contrary, clear statistical relations exist between these and monthly resolved snow and weather variables. In detail, tree rings seem to preferentially record avalanches triggered during cold winter storms with heavy precipitation. Conversely, historical avalanche data seem to contain a majority of events that were released later in the season and during episodes of strong positive temperature anomalies.     

Efficacy of created and restored nesting sites for the conservation of colonial Laridae in the South of France

By rapidly modifying key habitat components, habitat restoration is at risk of producing attractive cues for animals without providing habitats of sufficient quality. As such, individual fitness components, such as reproduction, could be reduced and restored habitats could become ecological traps. This risk notably appears by using artificial constructions in restoration projects, yet few studies have evaluated their efficacy in a robust way. We investigated this by analyzing 154 islets that were created or restored to improve the conservation status of 7 colonial Laridae species in the South of France. From 2007 to 2016, we compared occupancy dynamics and breeding parameters of these species between the restored sites and 846 unmanaged nesting sites. We also explored species’ preference for different nesting site characteristics and their respective effect on breeding parameters. Restored nesting sites were 2–9 times as attractive as unmanaged sites for all species except the Black-headed Gull (Chroicocephalus ridibundus). Colonization probability was up to 100 times higher in sites already used by other species the previous year and increased with distance to the shore until >0.2 when distance was over 250 m. Abandonment probability was 29–70% lower when breeding was successful the previous year in all species except the Sandwich Tern (Thalasseus sandvicensis). Productivity and breeding success probability were 2 times higher on managed sites. Distance from the shore was an important attractive characteristic of artificial nesting sites in all species. Other nesting site characteristics had species-specific effects on colonization, abandonment, and breeding success. Our results indicate that managed nesting sites are successful conservation tools for colonial Laridae in the Mediterranean and do not act as ecological traps. Our study showed that testing the ecological trap hypothesis is a robust way to evaluate the success of restoration projects of breeding habitats.     

The role of digital data entry in participatory environmental monitoring

Many argue that monitoring conducted exclusively by scientists is insufficient to address ongoing environmental challenges. One solution entails the use of mobile digital devices in participatory monitoring (PM) programs. But how digital data entry affects programs with varying levels of stakeholder participation, from nonscientists collecting field data to nonscientists administering every step of a monitoring program, remains unclear. We reviewed the successes, in terms of management interventions and sustainability, of 107 monitoring programs described in the literature (hereafter programs) and compared these with case studies from our PM experiences in Australia, Canada, Ethiopia, Ghana, Greenland, and Vietnam (hereafter cases). Our literature review showed that participatory programs were less likely to use digital devices, and 2 of our 3 more participatory cases were also slow to adopt digital data entry. Programs that were participatory and used digital devices were more likely to report management actions, which was consistent with cases in Ethiopia, Greenland, and Australia. Programs engaging volunteers were more frequently reported as ongoing, but those involving digital data entry were less often sustained when data collectors were volunteers. For the Vietnamese and Canadian cases, sustainability was undermined by a mismatch in stakeholder objectives. In the Ghanaian case, complex field protocols diminished monitoring sustainability. Innovative technologies attract interest, but the foundation of effective participatory adaptive monitoring depends more on collaboratively defined questions, objectives, conceptual models, and monitoring approaches. When this foundation is built through effective partnerships, digital data entry can enable the collection of more data of higher quality. Without this foundation, or when implemented ineffectively or unnecessarily, digital data entry can be an additional expense that distracts from core monitoring objectives and undermines project sustainability. The appropriate role of digital data entry in PM likely depends more on the context in which it is used and less on the technology itself.     

Innovative design of an LDPE reactor bay against gas explosion using a risk-based approach coupled with high fidelity computer tools

High pressure tubular reactors for the production of Low Density Polyethylene (LDPE) are, for safety reasons, enclosed in a protective bay open towards the sky. They are becoming longer and larger due to production capacity increases. TECHNIP has historically designed these reactor bays based on Licensor information, which include more or less empirical correlations. Further capacity developments require the design of these concrete enclosures to be challenged. With this in mind, the present study shows the interest of implementing an innovative methodology based upon a risk-based approach to define new design criteria for the enclosure walls. The method, which combines both risk analysis with computational fluid dynamics modelling (3D CFD) and non-linear finite element analysis (NLFEA) tools, allows a clear determination of the design overpressure loads applied on walls and offers an optimisation of the concrete wall thickness. The CFD study also leads to a better understanding of the ventilation and efficiency of safety systems (gas detection, depressurisation) with possibility for improvement of the hazardous area classification rating.     

Reactivity of secondary phases in weathered limestone using isotopic tracers (D and 18O)

Environmental Science and Pollution Research - For a long time, limestone has been massively used in stone building and monuments because of its easy extraction and common presence in the...