Thermal Degradation and Kinetics of Alginate Polyurethane Hybrid Material Prepared from Alginic Acid as a Polyol

Alginate polyurethane hybrid materials are prepared by varying mole ratio of 2, 4-TDI as a di-isocyanate and alginic acid as a polyol in presence of dimethyl sulfoxide (DMSO) as a solvent. FT-IR and ¹³C one-dimensional (1D) solid state NMR (SSNMR) spectroscopy indicates that alginic acid is converted into alginate-polyurethane hybrid material via urethane linkage. Surface morphology of alginate-polyurethane hybrids changes by varying alginic acid: TDI ratio. The peak at near 221 °C in DSC thermogram of alginic acid (Alg) is shifted to higher temperature in alginate-polyurethane hybrid (Algpu1 and Algpu2). TGA study shows that alginate-polyurethane hybrid prepared using alginic acid: TDI = 1:1 (Algpu2) is more stable than alginic acid: TDI = 1:0.5 (Algpu1) at 300 °C. Kinetic analysis was performed to fit with TGA data, where the entire degradation process has been considered as three consecutive 1st order reactions. This study shows that thermal stability of alginate-polyurethane hybrid material was increased by adjusting mole ratio of 2, 4-TDI and alginic acid.     

Sorption of the fumigant 1,3-dichloropropene on soil

The fumigant 1,3-dichloropropene (1,3-D) is considered a major replacement to methyl bromide, which is to be phased out of use in the United States by 2005. The main purpose of this study was to evaluate soil-water partitioning of 1,3-D in two California agricultural soils (Salinas clay loam and Arlington sandy loam). The partition coefficients (Kd and Kf) were determined by directly measuring the concentration of 1,3-D in the solid phase (Cs) and aqueous phase (Cw) after batch equilibration. In the Salinas clay loam, the Kf of cis-1,3-D in adsorption and desorption isotherms was 0.47 and 0.54, respectively, with respective values of 0.39 and 0.49 for trans-1,3-D. This slight hysteric effect suggests that a different range of forces are involved in the adsorption and desorption process. Since n was near unity in the Freundlich equation, the Freundlich isotherms can also be approximated using the liner isotherm. At 25 degrees C, the Kd of the 1,3-D isomers in both soils ranged from 0.46 to 0.56, and the Koc (organic matter partition coefficient) ranged from 58 to 70. The relatively low Kd values and a Koc that falls within the range of 50-150, suggests that 1,3-D is weakly sorbed and highly mobile in these soils. Understanding the sorption behavior of 1,3-D in soil is important when developing fumigation practices to reduce the movement of 1,3-D to the air and groundwater.     

Effect of formulation on the behavior of 1,3-dichloropropene in soil

The fumigant 1,3-dichloropropene (1,3-D) has been identified as a partial replacement for methyl bromide (CH3Br) in soil fumigation. 1,3-Dichloropropene is formulated for soil fumigation as Telone II (Dow AgroSciences, Indianapolis, IN) for shank application and as an emulsifiable concentrate (EC) (Telone EC or InLine; Dow AgroSciences) for drip application. This study investigated the effect of formulation on the phase partitioning, transformation rate, and volatilization of 1,3-D isomers. Air-water partitioning coefficients (K(H)) were slightly higher for Telone II than for Telone EC, presumably due to the higher apparent water solubility of the EC formulation. Sorption of 1,3-D isomers in two soils was not affected by formulation. Formulation had no significant effect on the rate of 1,3-D transformation in water or soil. In general, differences in the rate of 1,3-D transformation and phase partitioning due to formulation as Telone II or Telone EC were very small. Thus, the effect of formulation on 1,3-D fate may be ignored in transformation and phase partition of 1,3-D in water and soil. Packed soil columns without plastic tarp indicated that with relatively shallow subsurface (10 cm) drip application of Telone EC, emission of 1,3-D isomers was more rapid and produced greater maximum instantaneous flux than deeper (30 cm) shank injection of Telone II. Both application methods resulted in the same cumulative emissions for both isomers, 45% for (E)-1,3-D and approximately 50% for (Z)-1,3-D. These results suggest that for drip application of fumigants to be effective in reducing emissions, the fumigant must be applied at sufficient depths to prevent rapid volatilization from the soil surface if the water application rate does not sufficiently restrict vapor diffusion.     

Distribution and structure of heterotrophic protist communities in the northeast equatorial Pacific Ocean

The distribution and structure of heterotrophic protist communities and size-fractionated chlorophyll a were studied during the Korea Deep Ocean Study 98 (KODOS 98) research expedition (July 1998) in the northeast equatorial Pacific Ocean (5–11°N). Areas of convergence and divergence formed at the boundaries of the South Equatorial Current (SEC), North Equatorial Current (NEC), and North Equatorial Counter Current (NECC) during the expedition. Water column physicochemical characteristics significantly influenced the size structure of heterotrophic protist communities. Intense vertical mixing and high nutrient and chlorophyll a concentrations characterized SEC and NECC areas, which were affected by converging and diverging water masses, respectively. Nanophytoplankton dominated in SEC and NECC areas; both areas also had relatively high heterotrophic protist biomasses (average 743 µg C m^–2). NEC areas were characterized by a stratified vertical structure, low nutrient and chlorophyll a concentrations, and picophytoplankton dominance. The heterotrophic protist biomass in NEC areas averaged 414 µg C m^–2; nanoprotists (<20 µm) dominated the community. The nanoprotist biomass comprised 49–54% of the total heterotrophic protist biomass in SEC/NECC areas and 67–72% in NEC areas. The biomass of heterotrophic protists was higher in SEC/NECC areas than in NEC areas, but the relative importance of nanoprotists was greater in NEC areas than in SEC/NECC areas. Heterotrophic dinoflagellates were dominant components of the <20 µm and >20 µm size classes in both water columns. The biomass of heterotrophic protists significantly correlated with the net-, nano-, and picophytoplankton biomass in SEC/NECC areas and with the nano- and picophytoplankton biomass in NEC areas. Heterotrophic protists and phytoplankton also showed strong positive correlation in the study area. The size structure of the phytoplankton biomass coincided with that of heterotrophic protists; the heterotrophic protist biomass positively correlated with the protists prey source. These relationships suggest that the community structure of heterotrophic protists and the microbial food web depended on size classes within the phytoplankton biomass. Microzooplankton grazing and phytoplankton growth rates were higher in SEC/NECC areas than in NEC areas. In contrast, the potential primary production grazed by microzooplankton was relatively high in NEC areas (127.3%) compared with SEC/NECC areas (94.6%). Our results indicate that the relative importance and size structure of heterotrophic protists might vary according to two distinct water column structures.Communicated by T. Ikeda, Hakodate     

Runoff of trifluralin,metolachlor, and metribuzin from a clay loam soil of Louisiana

Trifluralin[2,6-dinitro-N,N-dipropyl-4-(trifluormethyl)benzenamine], metolachlor[2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl) acetamide] and metribuzin[4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5(4H)one] were applied as pre-emergent herbicides to soybean plots in Louisiana (LA) at the rate of 1683 g/ha, 2759 g/ha and 609 g/ha, respectively. The concentrations of trifluralin in the runoff water ranged between 0.09 ng/mL and 0.02 ng/mL, which is lower than the 2 ng/mL US Environmental Protection Agency (EPA) advisory level for trifuralin in drinking water. Metolachlor concentrations in the runoff water ranged from 9.0 ng/mL to 221.5 ng/mL, which is both lower and higher than the 175 ng/mL EPA advisory level for metolachlor. Similarly, metribuzin concentrations in the runoff water ranged between 1.5 ng/mL and 56.2 ng/mL, which is also lower and higher than the 10 ng/mL EPA advisory level for metribuzin. Accordingly, from the field plots located on a Commerce clay loam soil in LA, although the concentration of trifluralin in runoff water were substantially lower than the EPA advisory level, metolachlor and metribuzin concentrations are likely to exceed the EPA advisory levels early on in the application season with a subsequent rapid decrease to safe levels. The total loss of trifluralin in runoff water was 0.005% of the applied amount over an 89 day period after application. The total loss of metolachlor and metribuzin in the runoff water was 4.67% and 5.36% of the applied amount, respectively, over a 22 day period after application. As such, there was almost no movement of trifluralin in the runoff water, whereas metolachlor and metribuzin were much more easily moved.     

Suppressing effect of goethite on PCDD/F and HCB emissions from plastic materials incineration

Polyethylene (PE) and polyvinyl chloride (PVC) are the leading plastics in total production in the world. The incineration of plastic-based materials forms many chlorinated compounds, such as polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs). In this study the addition of goethite (alpha-FeOOH) was investigated to determine its suppressing effect on the emission of PCDD/Fs and hexachlorobenzene (HCB) during the combustion of wastes containing PE and PVC. Goethite was being considered since it acts as a dioxin-suppressing catalyst during incineration. Results showed that incorporation of goethite greatly reduced the generation of PCDD/Fs and HCB in the exhaust gas and fly ash. The concentration of PCDD/Fs in flue gas decreased by 45% for lab-scale and 52% for small incinerator combustion experiments, where the goethite ratios in feed samples were 0.54% and 0.34%, respectively. Under the same conditions, the concentration of HCB in flue gas decreased by 88% and 62%, respectively. The present study showed a possible mechanism of the suppressing effect of the goethite for PCDD/F formation. It is likely that iron chlorides react with particulate carbon to form organo-chlorine compounds and promote PCDD/F formation in the gas phase. XRD analysis of combustion ash revealed that the goethite was partially dehydrated and converted to alpha-Fe(2)O(3) and Fe(3)O(4) but no iron chlorides formation. Therefore the goethite impregnated plastics can contribute the reduction of PCDD/Fs and HCB in the exhaust gas during incineration of MSW.     

Congener-specific approach to human PCB concentrations by serum analysis

The objective of this study was to evaluate all congeners of polychlorinated biphenyls (PCBs) in human serum samples. Concentrations of all PCB congeners in the serum of 87 volunteers were determined by high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). The participants consisted of 47 males and 40 females, including 25 men working at municipal solid waste incinerators (MSWIs). The mean concentrations of total PCBs and dioxin-like PCBs were 242.77ng/g lipid (median: 180.17ng/g lipid) and 18.57ng/g lipid (median: 15.34ng/g lipid), respectively. Penta-, hexa-, and heptachlorinated biphenyls contributed more than 80% of the total PCBs detected in human serum. Congener-specific analysis indicated that PCB153, PCB138, PCB180, PCB187, and PCB118 contributed 57.3% of the total PCBs detected in human serum samples. A statistical analysis was performed to determine whether there were significant correlations between PCB concentrations and specific variables such as age, gender, smoking habits, occupation, and body mass index (BMI). However, serum PCB concentrations correlated only with age. In addition, we found that total PCBs and dioxin-like PCBs highly correlated with PCB153 (correlation coefficient r=0.93, p<0.01) and PCB118 (correlation coefficient r=0.98, p<0.01), respectively. Thus these two congeners could be satisfactory indicators for total PCBs and dioxin-like PCBs in human serum.     

The mismatch of bioaccumulated trace metals (Cu,Pb and Zn) in field and transplanted oysters (<Emphasis Type="Italic">Saccostrea glomerata</Emphasis>) to ambient surficial sediments and suspended particulate matter in a highly urbanised estuary (Sydney estuary,Australia)

A significant correlation between sedimentary metals, particularly the ‘bio-available’ fraction, and bioaccumulated metal concentrations in the native Sydney rock oyster (Saccostrea glomerata) tissues has been successfully demonstrated previously for Cu and Zn in a number of estuaries in New South Wales, Australia. However, this relationship has been difficult to establish in a highly modified estuary (Sydney estuary, Australia) where metal contamination is of greatest concern and where a significant relationship would be most useful for environmental monitoring. The use of the Sydney rock oyster as a biomonitoring tool for metal contamination was assessed in the present study by investigating relationships between metals attached to sediments and suspended particulate matter (SPM) to bioaccumulated concentrations in oyster tissues. Surficial sediments (both total and fine-fraction), SPM and wild oysters were collected over 3 years from three embayments (Chowder Bay, Mosman Bay and Iron Cove) with each embayment representing a different physiographic region of Sydney estuary. In addition, a transplant experiment of farmed oysters was conducted in the same embayments for 3 months. No relationship was observed between sediments or SPM metals (Cu, Pb and Zn) to tissue of wild oysters; however, significant relationship was observed against transplanted oysters. The mismatch between wild and farmed, transplanted oysters is perplexing and indicates that wild oysters are unsuitable to be used as a biomonitoring tool due to the involvement of unknown complex factors while transplanted oysters hold strong potential.     

Distribution of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in human serum from urban areas in Korea

Concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were determined in serum samples from residents of a Korean urban area (Seoul). This study was performed on 40 Koreans in the general population, aged 27-58, who had resided in urban areas for more than 10 years without occupational exposure to organochlorine pollutants. To our knowledge, this study was the first report on serum concentrations of OCPs in Korean residents. p,p'-DDE, beta-HCH, p,p'-DDT, HCB, and trans-nonachlor were the dominant OCPs in most samples. In addition, concentrations of 22 OCPs were measured by the isotope dilution method with GC-HRMS, which gave accurate and precise data for investigations of trend and international comparisons. The dominant PCBs were PCB153, 138, 180, 187, and PCB118, which contributed 60% to total PCBs. The median concentrations of total OCPs and total PCBs were 315 ng g(-1) lipid and 104 ng g(-1) lipid, respectively. In females, the serum concentrations of all determined organochlorine compounds except beta-HCH were positively correlated with age, and higher concentrations of organochlorine pollutants were found in males than in females. Compared to our previous studies, PCB concentrations in serum from urban areas have substantially decreased during the last decade leading to the observation that the strict regulation of PCBs was helpful in controlling the concentration of PCBs in the environment. Extensive monitoring programs are required for evaluating the concentrations of OCPs and PCBs in serum samples of the general population as an indicator of possible adverse health effects.     

Effect of Solvent Composition on Porosity,Surface Morphology and Thermal Behavior of Metal Alginate Prepared from Algae (<Emphasis Type="Italic">Undaria pinnatifida</Emphasis>)

Alginates, extracted from algae are linear unbranched polymers containing β-(1→4)-linked d-mannuronic acid (M) and α-(1→4)-linked l-guluronic acid (G) residues. The conversion of alginic acid into the metal alginate is confirmed using FTIR spectroscopy. Asymmetric and symmetric stretching of free carboxyl group present in metal alginate occurs almost at the same position in various solvent compositions. Total intrusion volume of metal alginate prepared in propanol (0.0742 mL/g) is greater compared to those in ethanol (0.0648 mL/g) and methanol (0.0393 mL/g) as solvent. Surface morphology as well as porosity and pore size distribution of metal alginate are greatly influenced by solvent. It can be seen from thermal analysis results that calcium alginate prepared using different solvent compositions started decomposing at 100 °C, but rapid degradation started around 200 °C. The results showed a stepwise weight loss during thermal sweep, indicating different types of reactions during degradation. First and second step of rapid degradation was situated around 200–300 and 300–550 °C, respectively; whereas the final step is situated around 550–650 °C. The trend of degradation was similar for all the solvents, although the amount of final residue varied from one solvent to another. At the same time, lower thermal stability was also observed with higher heating rates. Additionally, a kinetic analysis was performed to fit with TGA data, where the entire degradation process has been considered as three consecutive first order reactions.