Uncertainty in health risks due to anthropogenic primary fine particulate matter from different source types in Finland

The emission-exposure and exposure-response (toxicity) relationships are different for different emission source categories of anthropogenic primary fine particulate matter (PM_2.5). These variations have a potentially crucial importance in the integrated assessment, when determining cost-effective abatement strategies. We studied the importance of these variations by conducting a sensitivity analysis for an integrated assessment model. The model was developed to estimate the adverse health effects to the Finnish population attributable to primary PM_2.5 emissions from the whole of Europe. The primary PM_2.5 emissions in the whole of Europe and in more detail in Finland were evaluated using the inventory of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario model (FRES), respectively. The emission-exposure relationships for different primary PM_2.5 emission source categories in Finland have been previously evaluated and these values incorporated as intake fractions into the integrated assessment model. The primary PM_2.5 exposure-response functions and toxicity differences for the pollution originating from different source categories were estimated in an expert elicitation study performed by six European experts on air pollution health effects. The primary PM_2.5 emissions from Finnish and other European sources were estimated for the population of Finland in 2000 to be responsible for 209 (mean, 95% confidence interval 6–739) and 357 (mean, 95% CI 8–1482) premature deaths, respectively. The inclusion of emission-exposure and toxicity variation into the model increased the predicted relative importance of traffic related primary PM_2.5 emissions and correspondingly, decreased the predicted relative importance of other emission source categories. We conclude that the variations of emission-exposure relationship and toxicity between various source categories had significant impacts for the assessment on premature deaths caused by primary PM_2.5.     

Temporal variations of atmospheric aerosol in four European urban areas

Purpose

The concentrations of PM₁₀ mass, PM_2.5 mass and particle number were continuously measured for 18 months in urban background locations across Europe to determine the spatial and temporal variability of particulate matter.

Methods

Daily PM₁₀ and PM_2.5 samples were continuously collected from October 2002 to April 2004 in background areas in Helsinki, Athens, Amsterdam and Birmingham. Particle mass was determined using analytical microbalances with precision of 1 ??g. Pre- and post-reflectance measurements were taken using smoke-stain reflectometers. One-minute measurements of particle number were obtained using condensation particle counters.

Results

The 18-month mean PM₁₀ and PM_2.5 mass concentrations ranged from 15.4 ??g/m³ in Helsinki to 56.7 ??g/m³ in Athens and from 9.0 ??g/m³ in Helsinki to 25.0 ??g/m³ in Athens, respectively. Particle number concentrations ranged from 10,091 part/cm³ in Helsinki to 24,180 part/cm³ in Athens with highest levels being measured in winter. Fine particles accounted for more than 60% of PM₁₀ with the exception of Athens where PM_2.5 comprised 43% of PM₁₀. Higher PM mass and number concentrations were measured in winter as compared to summer in all urban areas at a significance level p?Conclusions Significant quantitative and qualitative differences for particle mass across the four urban areas in Europe were observed. These were due to strong local and regional characteristics of particulate pollution sources which contribute to the heterogeneity of health responses. In addition, these findings also bear on the ability of different countries to comply with existing directives and the effectiveness of mitigation policies.     

Evaluation of the European population intake fractions for European and Finnish anthropogenic primary fine particulate matter emissions

The intake fraction (iF) has been defined as the integrated incremental intake of a pollutant released from a source category or region summed over all exposed individuals. In this study we evaluated the iFs in the population of Europe for emissions of anthropogenic primary fine particulate matter (PM_2.5) from sources in Europe, with a more detailed analysis of the iF from Finnish sources. Parameters for calculating the iFs include the emission strengths, the predicted atmospheric concentrations, European population data, and the average breathing rate per person. Emissions for the whole of Europe and Finland were based on the inventories of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario (FRES) model, respectively. The atmospheric dispersion of primary PM_2.5 was computed using the regional-scale dispersion model SILAM. The iFs from Finnish sources were also computed separately for six emission source categories. The iFs corresponding to the primary PM_2.5 emissions from the European countries for the whole population of Europe were generally highest for the densely populated Western European countries, second highest for the Eastern and Southern European countries, and lowest for the Northern European and Baltic countries. For the entire European population, the iF values varied from the lowest value of 0.31 per million for emissions from Cyprus, to the highest value of 4.42 per million for emissions from Belgium. These results depend on the regional distribution of the population and the prevailing long-term meteorological conditions. Regarding Finnish primary PM_2.5 emissions, the iF was highest for traffic emissions (0.68 per million) and lowest for major power plant emissions (0.50 per million). The results provide new information that can be used to find the most cost-efficient emission abatement strategies and policies.     

Non-exhaust emission measurement system of the mobile laboratory SNIFFER

In this paper we describe and quality assure the sampling system of a mobile research laboratory SNIFFER which was shown to be a useful tool for studying emission levels of respirable dust from street surfaces. The dust plume had bimodal structure; another mode rising to higher altitudes whereas the other mode remained at lower altitudes. The system was tested on a route in Helsinki, Finland, during spring 2005 and 2006. The PM_2.5 and PM₁₀ were positively correlated and the PM levels increased with the vehicle speed. SNIFFER was able to identify the characteristic emission levels on different streets. A clear downward trend in the concentrations was observed in all street locations between April and June. The composition of the street dust collected by SNIFFER was compared with springtime PM₁₀ aerosol samples from the air quality monitoring stations in Helsinki. The results showed similarities in the abundance and composition of the mineral fraction but contained significantly more salt particles.     

A simple procedure for correcting loading effects of aethalometer data

A simple method for correcting for the loading effects of aethalometer data is presented. The formula BC(CORRECTED) = (1 + k x ATN) x BC(NONCORRECTED), where ATN is the attenuation and BC is black carbon, was used for correcting aethalometer data obtained from measurements at three different sites: a subway station in Helsinki, an urban background measurement station in Helsinki, and a rural station in Hyyti?l? in central Finland. The BC data were compared with simultaneously measured aerosol volume concentrations (V). After the correction algorithm, the BC-to-V ratio remained relatively stable between consequent filter spots, which can be regarded as indirect evidence that the correction algorithm works. The k value calculated from the outdoor sites had a clear seasonal cycle that could be explained by darker aerosol in winter than in summer. When the contribution of BC to the total aerosol volume was high, the k factor was high and vice versa. In winter, the k values at all wavelengths were very close to that obtained from the subway station data. In summer, the k value was wavelength dependent and often negative. When the k value is negative, the noncorrected BC concentrations overestimated the true concentrations.     

Effectiveness of Constructed Overland Flow Areas in Decreasing Diffuse Pollution from Forest Drainages

Forestry is the largest scale human impact affecting catchments in Finland and a prominent source of diffuse pollution in many water courses. Among the forestry activities, draining of wetlands had the most pronounced impacts on sediment, nutrient, and metal loading in the past. At present, renovation of old ditches and fertilization of peatlands constitute the major risk of forestry-induced diffuse pollution. Contemporary forestry aims at decreasing this risk with various riparian buffer strip designs. Among such designs, creation of overland flow areas by plugging the outlet ditches is increasingly used. Our objectives were to evaluate the potential of constructed overland flow areas to function as riparian buffers and estimate the quality and quantity of diffuse pollution from old versus recent forest drainages. We studied retention and release of pollutants from 20 constructed, 2- to 10-m-wide overland flow areas receiving drainage water from forested peatlands. Drainage waters were sampled above and below the plugged ditches three times per year from 1998 to 1999. Chemical oxygen demand and nutrient and metal loads and concentrations varied strongly between seasons, years, and drainage areas. Areas subjected to recent ditch renovations and fertilizations had clearly elevated seasonal loads and concentrations of total phosphorus (TP), PO₄, Fe, and Al in comparison to old treatment areas. Especially TP loads were high above the national average values measured for forestry-induced diffuse pollution. In general, water quality above and below the buffer strips did not differ significantly. Our results indicate that plugged outlet ditches and associated narrow overland flow areas do not function as proper buffers in peatland areas. We suggest that wider buffers with extensive overland flow areas are needed in order to control diffuse pollution from forested and drained peatlands.     

Aerosol particle number concentration measurements in five European cities using TSI-3022 condensation particle counter over a three-year period during health effects of air pollution on susceptible subpopulations

In this study, long-term aerosol particle total number concentration measurements in five metropolitan areas across Europe are presented. The measurements have been carried out in Augsburg, Barcelona, Helsinki, Rome, and Stockholm using the same instrument, a condensation particle counter (TSI model 3022). The results show that in all of the studied cities, the winter concentrations are higher than the summer concentrations. In Helsinki and in Stockholm, winter concentrations are higher by a factor of two and in Augsburg almost by a factor of three compared with summer months. The winter maximum of the monthly average concentrations in these cities is between 10,000 cm(-3) and 20,000 cm(-3), whereas the summer min is approximately 5000-6000 cm(-3). In Rome and in Barcelona, the winters are more polluted compared with summers by as much as a factor of 4-10. The winter maximum in both Rome and Barcelona is close to 100,000 cm(-3), whereas the summer minimum is > 10,000 cm(-3). During the weekdays the maximum of the hourly average concentrations in all of the cities is detected during the morning hours between 7 and 10 a.m. The evening maxima were present in Barcelona, Rome, and Augsburg, but these were not as pronounced as the morning ones. The daily maxima in Helsinki and Stockholm are close or even lower than the daily minima in the more polluted cities. The concentrations between these two groups of cities are different with a factor of about five during the whole day. The study pointed out the influence of the selection of the measurement site and the configuration of the sampling line on the observed concentrations.     

The Effect of Traction Sanding on Urban Suspended Particles in Finland

Springtime urban road dust forms one of the most serious problems regarding air pollution in Finland. The composition and origin of springtime dust was studied in southern Finland with two different methods. Suspended particles (PM10 and TSP) were collected with high volume particle samplers and particle deposition was collected with moss bags. The composition of the PM(1.5-10) fraction was studied using individual particle analysis with SEM/EDX. The deposition in the moss bags was analysed with ICP-MS. The results showed that during the study period, approximately 10% of both PM(1.5-10) particles and the deposition originated from sanding. Other sources in the springtime PM(1.5-10) were e.g. asphalt aggregate or soil and combustion processes. It can be concluded that sanding produced a relatively small amount of particulate matter under the investigated circumstances.     

Impact of unleaded gasoline introduction on the concentration of lead in the air of Dhaka, Bangladesh

Airborne particulate matter (APM) samples collected at a semiresidential area in Dhaka, Bangladesh, during the periods of 1994 and 1997-2000 have been studied to assess the impact of the use of unleaded gasoline in Bangladesh. According to scanning electron microscopy/ energy-dispersive X-ray microanalyzer studies, lead (Pb) was found as Pb sulfates and Pb halides in motor-vehicle exhaust particles, whose diameters were some hundreds of nanometers. No significant changes in the annual averages of APM mass and black carbon concentrations have been observed over the period. The yearly average Pb concentration reached a maximum value of 370 ng/m3 in the particulate matter with an aerodynamic diameter < 2.5 microm fraction in 1998. In 2000, the concentration decreased to approximately one-third (106 ng/m3) of the high earlier values after the introduction of unleaded gasoline in 1999. A significant lowering of the blood Pb level of the population over next few years is expected as a result of this great decrease in Pb concentration.     

芬兰北部流域内林业、农业及沉积对氮输出综合作用的模拟

本文运用了以遥感为基础的土地利用和森林分类,研究了大流域氮输出-存留空间模型N_EXRET.根据经验研究,估算了用以描述农业、林业和泥炭产量(收获)所起作用的输出系数.通过一小块集水试验区内详细记录的数据,求得林业活动典型系数.讨论了将该模型应用于奥鲁(Oulujoki)河流域(22840km2)的模拟效果.将氮通量预估模型与该流域不同地点测得的氮能量值进行了比较.根据资源配比,农业占总输出的17%,变动范围为8%(最高的亚流域)约38%(最低的近海亚流域).林业约占16%,不同亚流域间变化较小(11%～24%).在各亚流域中,所得到的氮输出总额中有7%～37%存留下来.根据质量平衡和敏感度分析,估计湖泊存留为5～10kg/hm2·a,泥炭地为0～1kg/hm2·a.从三条邻近的河流流域中取得的试验数据证实了模型结论.但是,对那些土地利用和沉积格局与北部流域明显不同的流域,还需进一步研究.