Heterogeneous water phase catalysis as an environmental application: a review

Catalytic water phase processes as an environmental application is a relatively novel subject with tremendous potential in the near future. This review of 120 references presents the wide scale of heterogeneous water phase applications studied mainly within past five years. Both oxidation and hydrogenation processes are included as well as TiO₂ assisted photocatalysis. According to the references, heterogeneous catalysis is developing rapidly. New bimetallic catalysts and supports with higher surface area have improved catalytic efficiency in both oxidation and hydrogenation processes. It also seems that study on use of some waste materials such as red mud as catalyst is a very progressive field. On the whole, the chemical aspects are pretty well known, but the catalyst durability, and in many cases activity as well, has to be improved.     

Occupational hygiene in terms of volatile organic compounds (VOCs) and bioaerosols at two solid waste management plants in Finland

Factors affecting occupational hygiene were measured at the solid waste transferring plant at Hyvinkää and at the optic separation plant in Hämeenlinna. Measurements consisted of volatile organic compounds (VOCs) and bioaerosols including microbes, dust and endotoxins.The most abundant compounds in both of the plants were aliphatic and aromatic hydrocarbons, esters of carboxylic acids, ketones and terpenes. In terms of odour generation, the most important emissions were acetic acid, 2,3-butanedione, ethyl acetate, alpha-pinene and limonene due to their low threshold odour concentrations. At the optic waste separation plant, limonene occurred at the highest concentration of all single compounds of identified VOCs. The concentration of any single volatile organic compound did not exceed the occupational exposure limit (OEL) concentration. However, 2,3-butanedione as a health risk compound is discussed based on recent scientific findings linking it to lung disease.Microbe and dust concentrations were low at the waste transferring plant. Only endotoxin concentrations may cause health problems; the average concentration inside the plant was 425 EU/m³ which clearly exceeded the threshold value of 90 EU/m³. In the wheel loader cabin the endotoxin concentrations were below 1 EU/m³. High microbial and endotoxin concentrations were measured in the processing hall at the optic waste separation plant. The average concentration of endotoxins was found to be 10,980 EU/m³, a concentration which may cause health risks. Concentrations of viable fungi were quite high in few measurements in the control room. The most problematic factor was endotoxins whose average measured concentrations was 4853 EU/m³.     

Does information of predators influence general wariness?

Antipredator behavior includes several qualitatively distinct activities, but few studies have determined the degree to which these activities are independent. If behaviors are not independent, then the nature of the relationship would illustrate potential performance constraints. We studied crimson rosellas (Platycercus elegans) and first focused on acoustic predator discrimination. We measured time allocation before and after playback of one of three experimental treatments (peregrine falcons—Falco peregrinus, wedge-tailed eagles—Aquila audax, and crimson rosellas) to determine whether or not rosellas discriminated predators from non-predators, and specifically whether or not they discriminated large from small predators. We then focused on the decision to flee. We experimentally approached subjects and measured the distance at which they oriented to us (alert distance) and the distance at which they fled (flight initiation distance; FID). We found that rosellas could distinguish among predators; however, there was no effect on general wariness as measured by FID. These two processes of antipredator behavior may, thus, be independent.     

PCDD/F reduction in incinerator flue gas by adding urea to RDF feedstock

The effect of urea on PCDD/F formation in a pilot incinerator was studied by incinerating urea with refuse-derived fuel (RDF) at three concentrations (0.1%, 0.5% and 1.0%, of the fuel feed). A distinct reduction in both PCDD/F and chlorophenol concentrations could be noticed when urea was introduced into the system. Partial-least-square (PLS) analysis of the data showed the importance of certain chlorophenol isomers as PCDD/F precursors, pointing to the possibility that the impact point of the urea inhibitor could be before the precursor molecules, i.e. chlorophenols, have been formed.     

Mechanical-biological waste treatment and the associated occupational hygiene in Finland

A special feature of waste management in Finland has been the emphasis on the source separation of kitchen biowaste (catering waste); more than two-thirds of the Finnish population participates in this separation. Source-separated biowaste is usually treated by composting. The biowaste of about 5% of the population is handled by mechanical-biological treatment. A waste treatment plant at Mustasaari is the only plant in Finland using digestion for kitchen biowaste. For the protection of their employees, the plant owners commissioned a study on environmental factors and occupational hygiene in the plant area. During 1998-2000 the concentrations of dust, microbes and endotoxins and noise levels were investigated to identify possible problems at the plant. Three different work areas were investigated: the pre-processing and crushing hall, the bioreactor hall and the drying hall. Employees were asked about work-related health problems. Some problems with occupational hygiene were identified: concentrations of microbes and endotoxins may increase to levels harmful to health during waste crushing and in the bioreactor hall. Because employees complained of symptoms such as dry cough and rash or itching appearing once or twice a month, it is advisable to use respirator masks (class P3) during dusty working phases. The noise level in the drying hall exceeded the Finnish threshold value of 85 dBA. Qualitatively harmful factors for the health of employees are similar in all closed waste treatment plants in Finland. Quantitatively, however, the situation at the Mustasaari treatment plant is better than at some Finnish dry waste treatment plants. Therefore is reasonable to conclude that mechanical sorting, which produces a dry waste fraction for combustion and a biowaste fraction for anaerobic treatment, is in terms of occupational hygiene better for employees than combined aerobic treatment and dry waste treatment.     

Intermittent agitation of liquid manure: effects on methane,microbial activity,and temperature in a farm-scale study

Liquid manure storages are a significant source of methane (CH₄) emissions. Farmers commonly agitate (stir) liquid manure prior to field application to homogenize nutrients and solids. During agitation, manure undergoes mechanical stress and is exposed to the air, disrupting anaerobic conditions. This on-farm study aimed to better understand the effects of agitation on CH₄ emissions, and explore the potential for intentional agitation (three times) to disrupt the exponential increase of CH₄ emissions in spring and summer. Results showed that agitation substantially increased manure temperature in the study year compared to the previous year, particularly at upper- and mid-depths of the stored manure. The temporal pattern of CH₄ emissions was altered by reduced emissions over the subsequent week, followed by an increase during the second week. Microbial analysis indicated that the activity of archaea and methanogens increased after each agitation event, but there was little change in the populations of methanogens, archaea, and bacteria. Overall, CH₄ emissions were higher than any of the previous three years, likely due to warmer manure temperatures that were higher than the previous years (despite similar air temperatures). Therefore, intermittent manure agitation with the frequency, duration, and intensity used in this study is not recommended as a CH₄ emission mitigation practice.

Implications: The potential to mitigate methane emissions from liquid manure storages by strategically timed agitation was evaluated in a detailed farm-scale study. Agitation was conducted with readily-available farm equipment, and targeted at the early summer to disrupt methanogenic communities when CH₄ emissions increase exponentially. Methane emissions were reduced for about one week after agitation. However, agitation led to increased manure temperature, and was associated with increased activity of methanogens. Overall, agitation was associated with similar or higher methane emissions. Therefore, agitation is not recommended as a mitigation strategy.     

Impact of genetically modified crops on soil- and plant-associated microbial communities

Transgenic or genetically modified plants possess novel genes that impart beneficial characteristics such as herbicide resistance. One of the least understood areas in the environmental risk assessment of genetically modified crops is their impact on soil- and plant-associated microbial communities. The potential for interaction between transgenic plants and plant residues and the soil microbial community is not well understood. The recognition that these interactions could change microbial biodiversity and affect ecosystem functioning has initiated a limited number of studies in the area. At this time, studies have shown the possibility that transgenes can be transferred to native soil microorganisms through horizontal gene transfer, although there is not evidence of this occurring in the soil. Furthermore, novel proteins have been shown to be released from transgenic plants into the soil ecosystem, and their presence can influence the biodiversity of the microbial community by selectively stimulating the growth of organisms that can use them. Microbial diversity can be altered when associated with transgenic plants; however, these effects are both variable and transient. Soil- and plant-associated microbial communities are influenced not only by plant species and transgene insertion but also by environmental factors such as field site and sampling date. Minor alterations in the diversity of the microbial community could affect soil health and ecosystem functioning, and therefore, the impact that plant variety may have on the dynamics of the rhizosphere microbial populations and in turn plant growth and health and ecosystem sustainability, requires further study.     

A learning-by-doing strategy to improve top management involvement in safety

The growth of legal regulations in occupational safety during the 70's alienated to some extent top management from health and safety issues; safety was regarded as an activity of safety professionals and labour inspection. This lack of commitment to safety management led to reduced activity and awareness. However, both research and practice indicate that the role of top management is of crucial importance for achieving results in safety.Having realized the problem and the lack of appropriate training to meet the demands of top management, a program called “One hour for safety management” has been developed. The training is arranged in an “action” setting, during the formal meeting of the executive board of the company. The program consists of four main parts: (1) Principles of modern safety management, (2) The company's accident insurance system, the interdependency between compensation costs and premiums, (3) The safety situation of the company; accidents, premiums and losses, hazards, safety program, and (4) Setting the safety targets and action plans required. More recently, a short audit process has been developed to reveal the important sources of loss and the state of affairs in the company's loss control systems. A special software package includes essential handouts of the safety management meetings complemented by self-auditing tools.The approach initiated or revived top management interest in and awareness of safety in several companies. The success of the meeting seems to depend on several factors, e.g. consultation skills, safety expertise, style of presentation, corporate culture and co-operation in the preparation of the session. The factors that contribute to an effective training for top management should further be analyzed, and the impact of the management training on accident rates is a task for evaluation studies in future.     

Destruction of PAHS from soil by using pressurized hot water extraction coupled with supercritical water oxidation

Chemical processes utilizing water both as extraction solvent and reaction medium are promising "Green Chemistry" alternatives to conventional techniques. Equipment for on-line coupled hot water extraction and supercritical water oxidation was constructed to extract polyaromatic hydrocarbons and toluene from sea sand followed by oxidation using hydrogen peroxide. The effectiveness of the technique is based on the physico-chemical properties of heated and pressurized water. Extraction efficiency increased with temperature and time; the best results were obtained at 300 degrees C with 40 min extraction time. In the oxidation stage, conversion of the PAHs increased with reaction time and oxidant concentration and the best conversion (97.0-99.9%, depending on the compound) was obtained at 425 degrees C with 43 s reaction time. Benzaldehyde and benzoic acid were the most abundant reaction intermediates in the oxidation process. In addition, phenol, p-cresol, and benzyl alcohol were found as intermediates. The intermediates originated mainly from toluene, which was present in much greater concentration than PAHs in the reaction medium.