The influence of source and timing of nitrogen fertilizers on yield and nitrogen use efficiency of four sweet potato cultivars

Nitrogen (N) availability is a very important determinant of crop yield. It is also one of the most expensive inputs in crop production. Thus, the efficient management of N by farmers with limited resource is a very important part of successful soil and crop management system. A field study was conducted on a Norfolk sandy loam soil at the George Washington Carver Agricultural Experiment Station, Tuskegee, AL, to evaluate the influence of fertilizer source and timing on the yield of four sweet potato [Ipomoea batatas (L.)] cultivars. Two N sources (urea, CO(NH₂)₂ and ammonium nitrate, NH₄NO₃), four sweet potato cultivars (‘Georgia Jet’, GA-Jet; ‘TU-82-155’, TU-155; ‘TU-1892’; and ‘Rojo Blanco’, Rojo-Bl) and three times (zero, single, and split applications) were used in a factorial designed experiment. Plants were harvested after 80 and 120 days and total and marketable yields determined. Nitrogen recovery efficiency, yield efficiency and physiological efficiency were also determined. Total and marketable yields of early maturing cultivars were significantly higher than of late maturing cultivars (P<0.05). The single application of N resulted in significantly higher yield in storage roots than split application (P<0.05). Physiological efficiency values were highly correlated with total marketable yields. Recovery rates increased with time. Late maturing cultivars tended to have higher N recovery and physiological efficiency than early maturing cultivars. These results suggest that cultivar maturity group should play an important part in N fertilization recommendations for sweet potato.     

A multi-objective optimisation approach to water management

The management of river basins is complex especially when decisions about environmental flows are considered in addition to those concerning urban and agricultural water demand. The solution to these complex decision problems requires the use of mathematical techniques that are formulated to take into account conflicting objectives. Many optimization models exist for water management systems but there is a knowledge gap in linking bio-economic objectives with the optimum use of all water resources under conflicting demands. The efficient operation and management of a network of nodes comprising storages, canals, river reaches and irrigation districts under environmental flow constraints is challenging. Minimization of risks associated with agricultural production requires accounting for uncertainty involved with climate, environmental policy and markets. Markets and economic criteria determine what crops farmers would like to grow with subsequent effect on water resources and the environment. Due to conflicts between multiple goal requirements and the competing water demands of different sectors, a multi-criteria decision-making (MCDM) framework was developed to analyze production targets under physical, biological, economic and environmental constraints. This approach is described by analyzing the conflicts that may arise between profitability, variable costs of production and pumping of groundwater for a hypothetical irrigation area.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

Effect of foreign direct investment on CO2 emission with the role of globalization,institutional quality with pooled mean group panel ARDL

Environmental Science and Pollution Research - This study utilized the Pooled Mean Group estimator to investigate the effect of renewable energy consumption, electricity consumption, economic...     

Climate change adaptation through local knowledge in the north eastern region of Bangladesh

Climate change adaptation in the low laying developing countries is becoming crucial at the present time. However, the local knowledge regarding climate change adaptation is not well focused. This study evaluates climate related perception and identifying various adaptation strategies in the low lying areas of North-Eastern Bangladesh. Six focus group discussions and 120 households?? survey were carried out to identify the major climate events in our study areas which were temperature change, drought, heavy rainfall and cyclone and storm surges. Furthermore, main livelihood problems arising from these events were lack of fish availability, scarcity of water in drought seasons and frequent flood in the rainy seasons. Results also revealed that a little portion (10%) of the respondents had well knowledge about the present climate change. However, seasonal livelihood and hazard calendar demonstrated that local people were increasingly changing their livelihood status with changing climatic hazards. At that situation local people tried to adapt themselves with the changing climate through changing their own behavior and introducing some adaptation strategies. We recognized total 16 adaptive measures in the study areas within which crop diversification, floating garden, duck rearing, cage aquaculture, wave protection walls, re-digging of canal and construction of embankments were popular. The present study revealed that local experiences in the face of climate change adaptation have merits which need special consideration. Continuous research and more incentives required for proper documentation and relegate the local adaptation knowledge in the tropic.     

Degradation of polyacrylamide (PAM) and methane production by mesophilic and thermophilic anaerobic digestion: Effect of temperature and concentration

• PAM degradation in thermophilic AD in comparison with mesophilic AD. • PAM degradation and its impact on thermophilic and mesophilic AD. • Enhanced methane yield in presence of PAM during thermophilic and mesophilic AD. • PAM degradation and microbial community analysis in thermophilic and mesophilic AD. Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added sludge during 15 days of thermophilic (55°C) AD compared to mesophilic (35°C) AD. Sludge and PAM dose from 10 to 50 g/kg TSS were used. The results showed that PAM degraded by 76% to 78% with acrylamide (AM) content of 0.2 to 3.3 mg/L in thermophilic AD. However, it degraded only 27% to 30% with AM content of 0.5 to 7.2 mg/L in mesophilic AD. The methane yield was almost 230 to 238.4 mL/g VSS on the 8th day in thermophilic AD but was 115.2 to 128.6 mL/g VSS in mesophilic AD. Mechanism investigation revealed that thermophilic AD with continuous stirring not only enhanced PAM degradation but also boosted the organics release from the sludge with added PAM and gave higher methane yield than mesophilic AD.     

Monitoring health implications of pesticide exposure in factory workers in Pakistan

The study aimed to determine the hazardous health effects of pesticides exposure in the factory workers by measuring plasma cholinesterase (PChE), pesticides residues, and renal and hepatic biochemical markers. In addition, we also assessed the knowledge, attitudes, and safety practices adopted by the industrial workers. The study was conducted in three different sizes of factories located in Lahore (large), Multan (medium), and Karachi (small) in Pakistan. Total 238 adult males consisting of 184 pesticide industrial workers (exposed group) from large-sized (67), medium-sized (61), small-sized (56) industrial formulation factories, and 54 controls (unexposed) were included in the study. All the participants were male of aged 18 to 58 years. PChE levels were estimated by Ellmann’s method. Plasma pesticides residue analysis was performed by using reverse phase C-18 on high-performance liquid chromatograph and GC with NPD detector. Plasma alanine aminotransferase (ALT), aspartate aminotransferase (AST), creatinine, urea, and gamma glutamyltransferase (GGT) were measured on Selectra E auto analyzer. Plasma and C-reactive protein was analyzed by Immulite 1000. The results revealed a significant decrease in plasma post exposure PChE levels (<30%) as compared to baseline in the workers of small (29%) and medium (8%) industrial units (p?< 0.001). Plasma cypermethrin, endosulfan, imidacloprid, thiodicarb, carbofuran, and methamidophos levels were found to be higher than allowable daily intake. Serum AST, ALT, creatinine GGT, malondialdehyde, total antioxidant, and CRP were significantly raised among the workers of small and medium pesticide formulation factories as compared to large industrial unit and controls (p?< 0.001). The study demonstrated that unsafe practices among small- and medium-sized pesticides industrial workers cause significant increase in pesticide exposure, oxidative stress, and derangement of hepatic and renal function.     

A two-generational reproductive toxicity study of zinc in rats

A two-generation reproductive toxicity study of zinc chloride (ZnCl(2)) was conducted in rats. F(o) male and female rats were administered 0.00 (control), 7.50 (low), 15.00 (mid) and 30.00 (high) mg/kg/day of ZnCl(2). Selected F(1) male and female rats were exposed to the same doses received by their parents (F(o)). Exposure of F(0) parental rats to ZnCl(2) showed significant reduction in fertility, viability (days 0 and 4), and the body weight of F(1) pups from the high-dose group but caused no effects on litter size, weaning index, and sex ratio. Similarly, the continued exposure of F(1) parental rats to ZnCl(2) also reduced fertility, liter size, viability (day 0), and the body weight of F(2) pups within the high-dose group but caused no effects on weaning index and sex ratio. Exposure of ZnCl(2) to F(0) and F(1) parental males resulted in a significant reduction in their body weights, and the F(0) and F(1) parental females did not show any significant difference in their body weights compared to their control groups. However, the postpartum dam weights of both F(0) and F(1) female rats were significantly reduced compared to their controls. Exposure of ZnCl(2) to F(o) and F(1) generation parental rats did not produce any significant change of their clinical signs as well as their clinical pathology parameters, except the alkaline phosphotase (ALK) level, which showed an upward trend in both sexes of both generations. Exposure of ZnCl(2) to F(0) rats resulted in a reduction of brain, liver, kidney, spleen and seminal vesicles weights of males and in the spleen and uterus of females. Similarly, exposure of F(1) rats to ZnCl(2) also resulted in reduction of brain, liver, kidney, adrenal, spleen, prostate and seminal vesicles weights of males and in spleen and uterus of females. ZnCl(2) exposure resulted in grossly observed gastro-intestianla (GI) tract, lymphoreticular/hematopoietic, and reproductive tract lesions in parental rats in both generations. Reduced body fat was also recorded in F(1) parental rats.     

Biosorption of Pb(II) and Cr(III) from aqueous solutions: breakthrough curves and modeling studies

The sorption capacity parameters obtained for batch studies provide useful information about biosorption system. However, such data fail to explain the process under continuous-flow conditions. The present study is an attempt to explore the biosorption of Pb(II) and Cr(III) by straw from local wheat (Triticum aestivum). The biosorbent has been characterized by using Fourier transform infrared spectroscopy and surface area and elemental analyses and found to be porous and polyfunctional. S-shaped breakthrough curves were obtained at different column heights for the both metal ions. Various breakthrough parameters and saturation times have been determined. The column data have been successfully used to study the Bohart–Adams' bed depth service time (BDST) model and Yoon and Nelson's model. It was found that BDST model quite efficiently explained the whole column data whereas Yoon and Nelson model could explain it below 90 % breakthrough concentration. The predicted and calculated BDST parameters were in agreement with each other. Yoon and Nelson's constant decreased with an increase in the column height for both metal ions. Effect of change in flow rate on the Pb(II) biosorption has also been discussed with respect to BDST approach.     

Froude scaling limitations in modeling of turbidity currents

The scaling problem associated with the modeling of turbidity currents has been recognized but is yet to be explored systematically. This paper presents an analysis of the dimensionless governing equations of turbidity currents to investigate the scale effect. Three types of flow conditions are considered: (i) conservative density current; (ii) purely depositional turbidity current; and (iii) mixed erosional/depositional turbidity current. Two controlling dimensionless numbers, the Froude number and the Reynolds number, appear in the non-dimensional governing equations. When densimetric Froude similarity is satisfied, the analysis shows that the results would be scale-invariant for conservative density current under the rough turbulent condition. In the case of purely depositional flows, truly scale-invariant results cannot be obtained, as the Reynolds-mediated scale effects appear in the bottom boundary conditions of the flow velocity and sediment fall velocity. However, the scale effect would be relatively modest. The Reynolds effect becomes more significant for erosional or mixed erosional/depositional turbidity currents as Reynolds-mediated scale effects also appear in the sediment entrainment relation. Numerical simulations have been conducted at three different scales by considering densimetric Froude scaling alone as well as combined densimetric Froude and Reynolds similarity. Simulation results confirm that although the scaling of densimetric Froude number alone can produce scale-invariable results for conservative density currents, variations occur in the case of turbidity currents. The results become scale invariant when densimetric Froude and Reynolds similarities are satisfied simultaneously.