Catalytic degradation of toxic organic dye using an aluminum-doped Cu0.4Zn0.6-xAlxFe2O4 (x = 0.0, 0.2, 0.4, 0.6) spinel ferrite in a photo-Fenton system

Catalytic activity of spinel ferrite in breaking down toxic dye materials are promising due to their uniqueness. In this study, aluminum-doped copper zinc ferrite, Cu_0.4Zn_0.6-xAl_xFe₂O₄ (x = 0.0, 0.2, 0.4, 0.6), a catalyst for toxic dye degradation is synthesized through chemical co-precipitation route. The formation of the spinel ferrite catalyst is initially confirmed by Fourier transform infrared spectra, which shows the frequency of metal-oxygen bond vibration at 539 and 427 cm⁻¹ attributed to the tetrahedral and octahedral sites respectively. Higher intensity sharp peak of X-ray diffraction for (311) plane is the evidence for the phase purity and the formation of spinel ferrite. The crystallite size is found to decrease with the increase of Al³⁺ ion. The surface structure of the obtained particles is investigated using a scanning electron microscope. Analyses of the material's magnetic characteristics using a vibrating sample magnetometer (VSM) revealed that it is, in fact, a soft magnet, as evidenced by the loop of its hysteresis, which is narrow. The catalytic degradation of methylene blue dye under the mechanism of the photo-Fenton process is studied with the obtained spinel ferrites and the result is found to be as high as 96.5%. The process follows pseudo-second order kinetics and the Langmuir isotherm.     

Evaluation and selection strategy for green supply chain using interval-valued q-rung orthopair fuzzy combinative distance-based assessment

Environment, Development and Sustainability - Environmental deterioration and global warming has created a substantial impact on international companies to incorporate eco-friendly, green supply...     

Evaluating public open spaces through the lively planning integrative perspective: a developing country context

Environment, Development and Sustainability - Public open spaces (POSs) provide a forum for social gathering, health, leisure, and recreation opportunities for city dwellers. POSs are considered...     

生物气溶胶的吸湿性

归纳了有关气溶胶吸湿性的测量方法以及过去近30a来文献中报道的生物气溶胶吸湿性的主要研究成果,总结了不同种类生物气溶胶之间吸湿性的差异.已有研究表明,绝大部分的生物气溶胶粒子都具有一定的吸湿性,当相对湿度为90%时,吸湿增长因子约为1.04（真菌孢子）~1.22（细菌）,花粉颗粒物吸湿后的质量与之前的比值为1.30~1.55.最后,提出了目前关于生物气溶胶吸湿性研究中尚未解决的科学问题及该领域的主要发展方向.     

Pt负载暴露(001)晶面Bi2WO6催化剂合成及光催化性能

通过水热法制备了暴露（001）晶面的Bi₂WO₆纳米片,利用光还原法将Pt纳米颗粒负载于其表面.选择苯甲醇氧化和罗丹明B（RhB）降解为探针反应,评价了催化剂的光催化性能.在苯甲醇氧化实验中,Pt负载暴露001晶面的Bi₂WO₆样品的苯甲醇转化率为20.7%,约为未负载样品的2倍.在RhB降解实验中,Pt负载样品在光照40min后对RhB的矿化率可达81.1%,而未负载样品RhB矿化率仅为55.8%,表明Pt负载样品具有更优的降解速率和矿化能力.催化剂性能的提升归因于高能晶面暴露和Pt负载的协同作用.Pt纳米颗粒的负载作为助催化剂增加了催化剂表面的活性位点,同时提高了晶面光生电子空穴对的分离和迁移效率.     

磁性有序介孔碳的制备及其对水中双酚A的吸附

采用水热法成功制备了磁性有序介孔碳（Fe-OMC）,用于吸附水中双酚A （BPA）.采用高倍投射电镜、X射线衍射仪、傅里叶红外光谱仪、比表面积分析仪和振动样品磁强计对Fe-OMC进行表征.结果表明,该吸附剂具备较大的比表面积、独特的有序介孔孔道结构、丰富的含氧官能团以及较强的超顺磁性.Fe-OMC能够高效地吸附去除水中的BPA,平衡吸附量可达72.62mg/g,经过外加磁场分离回收后依旧具备较好的吸附性能.随着BPA浓度从1mg/L提高到20mg/L,其平衡吸附量由8.33mg/g增至91.78mg/g.随着pH值的升高呈现出先降低后升高再降低的趋势,最高吸附量出现在pH=8（75.34mg/g）.Fe-OMC对BPA的吸附过程可用准二级吸附动力学模型和Langmuir吸附等温模型进行描述.计算的热力学参数表明,Fe-OMC对BPA的吸附过程是自发进行的放热过程.     

沈阳市郊区环境空气中醛酮类化合物的污染特征与来源分析

为探究沈阳市郊区环境空气中醛酮类化合物的污染特征,于2017年8月24日—9月2日采用2,4-二硝基苯肼固相吸附/高效液相色谱方法对沈阳市郊区醛酮类化合物进行观测分析,利用美国环境保护局推荐的人体健康风险评价方法对部分有毒有害醛酮类化合物的人体健康风险进行了评价,并利用比值法对醛酮类化合物的来源进行了初步分析.结果表明:醛酮类化合物质量浓度日均值范围为23.16~38.38 μg/m3;质量浓度最高的4种醛酮类化合物依次是丙酮、甲醛、正丁醛和乙醛,其质量浓度日均值的平均值分别为8.71、5.90、5.48和2.95 μg/m3.对·OH消耗速率(L_OH)贡献较大的醛酮类化合物物种是正丁醛、甲醛和乙醛,臭氧生成潜势贡献(OFP)较大的醛酮类化合物物种是甲醛、正丁醛和乙醛,在研究区影响醛酮类化合物光化学反应活性的物种主要是甲醛、乙醛和正丁醛.研究区观测期间,环境空气中甲醛和乙醛的致癌性风险值分别为1.18×10-5和5.91×10-6,对暴露人群存在潜在的致癌风险;乙醛的非致癌风险值为0.05,对暴露人群不存在非致癌风险.在研究区的一次臭氧轻度污染过程期间,环境空气中的甲醛和乙醛受天然源排放的挥发性有机物二次转化的影响减弱,甲醛、乙醛和丙酮受到炼焦工业和机动车等人为源排放的影响增强,而正丁醛主要受当地精细化工产业排放的影响.研究显示,沈阳市应加大对炼焦工业、精细化工和机动车来源排放醛酮类化合物的管制,以降低环境空气中活性醛酮类化合物及有毒有害醛酮类化合物的浓度.      

Studies on the effects of some organic pollutants on the heavy metal transport in an Indian soil

The translocation of some heavy metals, such as Hg, Cd, Cu, Co, Ni and Zn, as affected by organic pollutants, i.e. methanol, ethanol, propanol, formaldehyde, acetaldehyde, benzaldehyde, acetone, ethyl methyl ketone and cyclo-hexanone, was studied in an Indian red soil using soil thin layer chromatography. It was observed that an increase in the concentration of organic compounds in developer enhances the heavy metal mobility, except in the case of Cu and Hg which show a decreasing trend. The results are discussed in relation to the physico-chemical characteristics of the soil and adsorption/desorption phenomena.     

Impact of sulphur dioxide exposure on conidial germination of powdery mildew fungi

The impact of sulphur dioxide, in two different concentrations (286 microg m(-3) and 571 microg m(-3)) for various exposure periods, on conidial germination of some powdery mildew fungi was investigated in artificial treatment conditions. SO(2) in general was inhibitory for conidial germination of all the studied powdery mildew fungi and the species did not differ much from each other in their sensitivity to SO(2). The per cent conidial germination was increasingly inhibited with an increase in the concentration of SO(2). The concentration of SO(2) and the exposure period were important determinants of the inhibitory effect.