浅析环境监测QC/QA过程的采样环节

对环境监测布点采样中的QC/QA以及由采样引起的误差来源做了简要分析,并对监测采样过程中QC/QA的操作提出了一些设想。     

False-negative prenatal exclusion of Wiskott-Aldrich syndrome by measurement of fetal platelet count and size

The study of the fetal platelet count and size can, according to the literature, be used for the prenatal diagnosis of the Wiskott-Aldrich syndrome (WAS). So far, no affected fetuses have been identified by this method. All pregnancies in which this method had been applied to resulted, as correctly predicted, in the birth of normal children. Here we report on a familial case of WAS where the haematological parameters failed to reveal the affected second child. Hence we assume that the platelet count and size of platelets remain normal in fetuses with WAS to the gestational age of 22 weeks and cannot be used for prenatal diagnosis.     

Theoretical and observational assessments of flare efficiencies

Flaring of waste gases is a common practice in the processing of hydrocarbon (HC) materials. It is assumed that flaring achieves complete combustion with relatively innocuous byproducts such as CO2 and H2O. However, flaring is rarely successful in the attainment of complete combustion, because entrainment of air into the region of combusting gases restricts flame sizes to less than optimum values. The resulting flames are too small to dissipate the amount of heat associated with 100% combustion efficiency. Equations were employed to estimate flame lengths, areas, and volumes as functions of flare stack exit velocity, stoichiometric mixing ratio, and wind speed. Heats released as part of the combustion process were then estimated from a knowledge of the flame dimensions together with an assumed flame temperature of 1200 K. Combustion efficiencies were subsequently obtained by taking the ratio of estimated actual heat release values to those associated with 100% complete combustion. Results of the calculations showed that combustion efficiencies decreased rapidly as wind speed increased from 1 to 6 m/sec. As wind speeds increased beyond 6 m/sec, combustion efficiencies tended to level off at values between 10 and 15%. Propane and ethane tend to burn more efficiently than do methane or hydrogen sulfide because of their lower stoichiometric mixing ratios. Results of theoretical predictions were compared to nine values of local combustion efficiencies obtained as part of an observational study into flaring activity conducted by the Alberta Research Council (ARC). All values were obtained during wind speed conditions of less than 4 m/sec. There was generally good agreement between predicted and observed values. The mean and standard deviation of observed combustion efficiencies were 68 +/- 7%. Comparable predicted values were 69 +/- 7%.     

Theoretical and Observational Assessments of Flare Efficiencies

ABSTRACT

Flaring of waste gases is a common practice in the processing of hydrocarbon (HC) materials. It is assumed that flaring achieves complete combustion with relatively innocuous byproducts such as CO₂ and H₂O. However, flaring is rarely successful in the attainment of complete combustion, because entrainment of air into the region of combusting gases restricts flame sizes to less than optimum values. The resulting flames are too small to dissipate the amount of heat associated with 100% combustion efficiency.

Equations were employed to estimate flame lengths, areas, and volumes as functions of flare stack exit velocity, stoichiometric mixing ratio, and wind speed. Heats released as part of the combustion process were then estimated from a knowledge of the flame dimensions together with an assumed flame temperature of 1200 K. Combustion efficiencies were subsequently obtained by taking the ratio of estimated actual heat release values to those associated with 100% complete combustion.

Results of the calculations showed that combustion efficiencies decreased rapidly as wind speed increased from 1 to 6 m/sec. As wind speeds increased beyond 6 m/sec,combustion efficiencies tended to level off at values between 10 and 15%. Propane and ethane tend to burn more efficiently than do methane or hydrogen sulfide because of their lower stoichiometric mixing ratios.

Results of theoretical predictions were compared to nine values of local combustion efficiencies obtained as part of an observational study into flaring activity conducted by the Alberta Research Council (ARC). All values were obtained during wind speed conditions of less than 4 m/sec. There was generally good agreement between predicted and observed values. The mean and standard deviation of observed combustion efficiencies were 68 ± 7%. Comparable predicted values were 69 ± 7%.     

Predictions of Maximum Ground-Level H2S Concentrations Resulting from Two Sour Gas Well Blowouts

Alberta has recently experienced two sour gas well blowouts: Lodgepole and Claresholm. Sulphur emissions associated with the blowouts were about 1400 and 2 tonnes per day, respectively. The Lodgepole blowout was not only of much greater magnitude but also lasted significantly longer than the Claresholm blowout (67 vs. 4 days). Special air quality monitoring with respect to H₂S was conducted to assess impacts of the blowouts. Monitoring was especially extensive for the Lodgepole incident. Maximum observed ground-level H₂S concentrations were compared to predictions obtained using a Gaussian model which makes allowance for the effects of sonic exit velocity on plume spread and the effects of wind shear on plume transport. There was appreciable agreement between predicted and observed values.     

Ring test of a method for assessing the phototransformation of chemicals in water

Seven types of apparatus have been used to measure the quantum yields for direct phototransformation in water of 4 chemicals (pentachlorophenol; 2,4-dichlorophenol; 3,4-dichloroaniline; 4-nitrophenol) under polychromatic (12 laboratories) and monochromatic (3 laboratories) light, according to a common test protocol. The results with both types of light were in good agreement. The reproducibility and accuracy of quantum yields obtained with the ECETOC/University of Clermont-Ferrand apparatus with polychromatic light (6 laboratories) were similar to or better than those obtained with monochromatic light. A disadvantage of the method with polychromatic light is that the calculation is more complicated, but this can be overcome by the use of a desk-top computer. On the other hand experiments with polychromatic light permit the determination of quantum yields of substances of low photoreactivity.     

An Advective Model for Predicting Air Pollution within an Urban Heat Island With Applications to New York City

A simple air pollution model has been tested for New York City with data from five mornings which were characterized by urban heat island effects. The model is nondiffusive and relies primarily upon conservation of mass. The correlation coefficient between over 400 predicted and observed values of SO₂ mixing ratio was 0.83.     

A Study of Cooling Pond Fog Generation

Airborne particulate and soil materials sampled in the vicinity of a lead/zinc smelter and subsequently digested In nitric-perchloric acids have been analyzed using an inductively coupled plasma-atomic emission spectrometer (ICP/AES). The samples were collected in two communities; a study community situated immediately adjacent to the smelter complex and a control community some 50 kilometers distant. Enrichment of airborne as well as soil materials is discussed and there is evidence of lead, zinc, copper, cadmium, arsenic, and antimony enrichment from the smelting processes. In addition, an aqueous extraction of the airborne materials isolated sulfate, nitrate, fluoride, and ammonia and gave evidence of enrichment due to fugitive SO _x , NO _x , HF, and NH₃ gaseous emissions.