Particulate matter emission rates from beef cattle feedlots in Kansas-reverse dispersion modeling

Open beef cattle feedlots emit various air pollutants, including particulate matter (PM) with equivalent aerodynamic diameter of 10 microm or less (PM10); however limited research has quantified PM10 emission rates from feedlots. This research was conducted to determine emission rates of PM10 from large cattle feedlots in Kansas. Concentrations of PM10 at the downwind and upwind edges of two large cattle feedlots (KS1 and KS2) in Kansas were measured with tapered element oscillating microbalance (TEOM) PM10 monitors from January 2007 to December 2008. Weather conditions at the feedlots were also monitored. From measured PM10 concentrations and weather conditions, PM10 emission rates were determined using reverse modeling with the American Meteorological Society/U.S. Environmental Protection Agency Regulatory Model (AERMOD). The two feedlots differed significantly in median PM10 emission flux (1.60 g/m2-day for KS1 vs. 1.10 g/m2-day for KS2) but not in PM10 emission factor (27 kg/1000 head-day for KS1 and 30 kg/1000 head-day KS2). These emission factors were smaller than published U.S. Environmental Protection Agency (EPA) emission factor for cattle feedlots.     

Concentrations of particulate matter emitted from large cattle feedlots in Kansas

Particulate matter (PM) emitted from cattle feedlots are thought to affect air quality in rural communities, yet little is known about factors controlling their emissions. The concentrations of PM (i.e., PM2.5, PM10, and total suspended particulates or TSP) upwind and downwind at two large cattle feedlots (KS1, KS2) in Kansas were measured with gravimetric samplers from May 2006 to October 2009 (at KS1) and from September 2007 to April 2008 (at KS2). The mean downwind and net (i.e., downwind - upwind) mass concentrations of PM2.5, PM10, and TSP varied seasonally, indicating the need for multiple-day, seasonal sampling. The downwind and net concentrations were closely related to the moisture content of the pen surface. The PM2.5/PM10 and PM2.5/TSP ratios at the downwind sampling location were also related to the moisture content of the pen surface, humidity, and temperature. Measurement of the particle size distribution downwind of the feedlot with a cascade impactor showed geometric mean diameter ranging from 7 to 18 microm, indicating that particles that were emitted from the feedlots were generally large in size.     

基于UD-PLS对牛粪堆制Cu和Zn钝化预测模型的研究

选取钝化材料木醋液和影响堆肥质量的关键因素:含水量和C/N,每个因素安排6个水平,利用均匀设计进行多因素多水平试验,对试验结果进行偏最小二乘回归分析,建立对重金属的钝化预测模型.结果表明:木醋液添加比例为0.50%、含水量为40%和C/N为40时,Cu和Zn的钝化效果均达到最大值,分别为13.5%和30.2%;其中重金属Cu的钝化预测模型为 ,其中交叉有效性为 ,模型达到精度要求;重金属Zn的钝化预测模型为 ,其中交叉有效性为 ,模型达到精度要求.针对多因素多水平的复杂堆肥系统中,将均匀设计与偏最小二乘法有机耦合,有效地解决了试验次数多、因素间多重相关性的问题,从而使模型精度和实用性都得到提高.     

Laboratory evaluation of dust-control effectiveness of pen surface treatments for cattle feedlots

Emission of particulate matter (PM) is one of the major air quality concerns for large beef cattle feedlots. Effective treatments on the uncompacted soil and manure mixture of the pen surface may help in reducing PM emission from feedlots. A laboratory apparatus was developed for measuring dust-emission potential of cattle feedlot surfaces as affected by pen surface treatments. The apparatus was equipped with a simulated pen surface, four mock cattle hooves, and samplers for PM with equivalent aerodynamic diam. ≤ 10 μm (PM(10)). The simulated pen surface had a layer of dry, loose feedlot manure with a compacted soil layer underneath. Mock hooves were moved horizontally on the manure layer to simulate horizontal action of cattle hooves on the pen surface. High-volume PM samplers were used to collect emitted dust. Effects of hoof speed, depth of penetration, and surface treatments with independent candidate materials (i.e., sawdust, wheat straw, hay, rubber mulch, and surface water application) on PM(10) emission potential of the manure layer were investigated. Our laboratory study showed PM(10) emission potential increased with increasing depth of penetration and hoof speed. Of the surface treatments evaluated, application of water (6.4 mm) and hay (723 g m(-2)) exhibited the greatest percentage reduction in PM(10) emission potential (69 and 77%, respectively) compared with the untreated manure layer. This study indicated application of hay or other mulch materials on the pen surface might be good alternative methods to control dust emission from cattle feedlots.     

Dynamic air sampling of volatile organic compounds using solid phase microextraction

A new dynamic air sampling system was devised and evaluated in conjunction with solid phase microextraction (SPME) fiber materials for extracting odor-causing volatile organic compounds (VOCs) present in swine building environments. Utilizing a standard solution consisting of 11 compounds (i.e., volatile fatty acids, indoles, and phenol), sampling times, volumes, and flow rates were adjusted to establish optimal extraction conditions. Results indicated that the sampling system was effective with the Carboxen/Polydimethylsiloxane (CAR/PDMS) fiber in extracting all 11 standard compounds. The best sampling conditions for the extraction were a 100-mL sampling vial subjected to a continuous flow of 100 mL/min for 60 min. The gas chromatographic analysis showed that the reproducibility was within acceptable ranges for all compounds (RSD=4.24-17.26% by peak areas). In addition, field tests revealed that the sampling system was capable of detecting over 60 VOCs in a swine house whose major components were identified by gas chromatography-mass spectrometry (GC-MS) and by their retention times as volatile fatty acids, phenols, indole, and skatole. The field tests also showed that considerably different levels of VOCs were present in various parts of the swine building.     

Current Near‐to‐Nature Forest Management Effects on Functional Trait Composition of Saproxylic Beetles in Beech Forests

With the aim of wood production with negligible negative effects on biodiversity and ecosystem processes, a silvicultural practice of selective logging with natural regeneration has been implemented in European beech forests (Fagus sylvatica) during the last decades. Despite this near‐to‐nature strategy, species richness of various taxa is lower in these forests than in unmanaged forests. To develop guidelines to minimize the fundamental weaknesses in the current practice, we linked functional traits of saproxylic beetle species to ecosystem characteristics. We used continental‐scale data from 8 European countries and regional‐scale data from a large forest in southern Germany and forest‐stand variables that represented a gradient of intensity of forest use to evaluate the effect of current near‐to‐nature management strategies on the functional diversity of saproxylic beetles. Forest‐stand variables did not have a statistically significant effect on overall functional diversity, but they did significantly affect community mean and diversity of single functional traits. As the amount of dead wood increased the composition of assemblages shifted toward dominance of larger species and species preferring dead wood of large diameter and in advanced stages of decay. The mean amount of dead wood across plots in which most species occurred was from 20 to 60 m³/ha. Species occurring in plots with mean dead wood >60 m³/ha were consistently those inhabiting dead wood of large diameter and in advanced stages of decay. On the basis of our results, to make current wood‐production practices in beech forests throughout Europe more conservation oriented (i.e., promoting biodiversity and ecosystem functioning), we recommend increasing the amount of dead wood to >20 m³/ha; not removing dead wood of large diameter (50 cm) and allowing more dead wood in advanced stages of decomposition to develop; and designating strict forest reserves, with their exceptionally high amounts of dead wood, that would serve as refuges for and sources of saproxylic habitat specialists. Efectos Actuales del Manejo Casi Natural de Bosques sobre la Composición de Atributos Funcionales de Escarabajos Saproxílicos en Bosques de Haya