Managerial policy and economic analysis of wind-generated renewable hydrogen for light-duty vehicles: Green solution of energy crises

Environmental Science and Pollution Research - The unconventional energy sources like hydrogen energy have tremendous potential of filling the gap between economic growth and clean energy...     

The impact trilemma of energy prices,taxation, and population on industrial and residential greenhouse gas emissions in Europe

Environmental Science and Pollution Research - As a major source of pollution and the cause of climate change, greenhouse gas emissions are attracting the attention of scholars, policymakers, and...     

House dust as a source of human exposure to polybrominated diphenyl ethers in Kuwait

This study reports concentrations of polybrominated diphenyl ethers (PBDEs) in dust samples collected from 17 homes in Kuwait. PBDEs were measured in all homes investigated with mean summation operatorPBDEs concentration ranging from 1 to 393 ng g(-1), with a geometric mean of 76 ng g(-1). The dominant congener in all samples was BDE 209 constituting ca. 85% of the summationPBDEs followed by BDE 99 (5%), BDE 47 (4.5%), and BDE 183 (2%). The congener mixture in dust is dominated by those in deca and penta formulations. Using the measured concentrations and estimates of dust ingestion rates for children and adults, estimated human non-dietary exposure based on mean PBDE levels were 14.8 and 1.5 ng day(-1) for children and adults, respectively. The 10-fold difference in exposure estimates between children and adults in this study supports previous reports that children are at greater risk from pollutants that accumulate indoors. The ubiquitous distribution of these chemicals as noted in this study highlights the fact that we are continuously exposed to low doses of chemicals in the indoor environment.     

Phosphorus removal in vegetated filter strips

Vegetated filter strips (VFS) are used recently for removal, at or near the source, of sediment and sediment-bound chemicals from cropland runoff. Vegetation within the flowpath increases water infiltration and decreases water turbulence, thus enhancing pollutant removal by sedimentation within filter media and infiltration through the filter surface. Field experiments have been conducted to examine the efficiency of vegetated filter strips for phosphorus removal from cropland runoff with 20 filters with varying length (2 to 15 m), slope (2.3 and 5%), and vegetated cover, including bare-soil plots as control. Artificial runoff used in this study had an average phosphorus concentration of 2.37 mg L(-1) and a sediment concentration of 2700 mg L(-1). The average phosphorus trapping efficiency of all vegetated filters was 61% and ranged from 31% in a 2-m filter to 89% in a 15-m filter. Filter length has been found to be the predominant factor affecting P trapping in VFS. The rate of inflow, type of vegetation, and density of vegetation coverage had secondary influences on P removal. Short filters (2 and 5 m), which are somewhat effective in sediment removal, are much less effective in P removal. Increasing the filter length beyond 15 m is ineffective in enhancing sediment removal but is expected to further enhance P removal. Sediment deposition, infiltration, and plant adsorption are the primary mechanisms for phosphorus trapping in VFS.     

Assessment of Groundwater Quality in a Structurally Deformed Granitic Terrain in Hyderabad, India

Geochemical study of groundwater from a structurally deformed granitic terrain near Hyderabad (India) was carried out to understand and evaluate the hydrogeochemical processes and quality of groundwater. Several trace elements (Fe, Mn, Be, Al, V, Cr, Co, Ni, Cu, Zn, As, Sr, Mo, Cd, Sb, Ba, Pb, U) along with major ions and minor elements were precisely estimated in shallow and drilled wells to know the suitability of water for drinking and irrigation purposes. Analytical data shows that pH and major ion chemistry in dug wells and bore wells do not vary significantly, while some trace elements (Fe, Mn, Al, Be, Co, Pb, U and Zn) vary in dug wells and bore wells, which can be attributed to differential mineral weathering and dissolution/precipitation reactions along fractures/joints. Although the water is not potable, it was found to be suitable for irrigation with little danger in the development of harmful level of exchangeable sodium. It is inferred that the chemical composition of the groundwater in this region is likely to have its origin from silicate weathering reactions and dissolution/precipitation processes supported by rainfall and groundwater flow.     

Polycyclic aromatic hydrocarbon distribution in serum of Saudi children using HPLC-FLD: marker elevations in children with asthma

Diesel exhaust consists of a complex mixture of chemicals which contain known genotoxicants, one of which is polycyclic aromatic hydrocarbons (PAHs) which may be associated with adverse respiratory health outcomes. This study aimed to evaluate the distribution patterns of PAHs (anthracene, naphthalene, fluorene, phenanthrene, cyclopentaphenanthrene, pyrene, fluoranthene, benzanthracene, chrysene, benzo(e)pyrene, benzoacephenanthrylene, and benzo(a)pyrene) in serum collected from asthmatic and healthy control children. PAH serum levels were measured in samples collected from children who lived in 11 different locations in/round Riyadh, Saudi Arabia (Al-yarmouk, Usaibi, Sultana Al-kadema, Omrrojam, Kof, Janoob Dawdmi, Guberah, Arabbuah, Al-mozahemyah, Iskan Al-mazzer, and Al-gharabi) during the period 2010–2011. Our results showed that the highest total mean concentrations of PAH were found in serum samples collected from people who lived in Sultana Aljadhida, Almozahemyah, Guberah, and Omrrojam and were 663.9, 486.17, 412.18, and 258.6 ng ml^?1, respectively. The most prevalent PAHs in serum samples were naphthalene, bezanthracene, benzoacephenanthrylene, phenanthrene, chrysene, and benzo(a)pyrene with a frequency that ranged from 54.5 to 90.9 % positive samples. A close monitoring of PAH pollution is strongly recommended, especially in food and plant samples, because of their high bioaccumulation capacity.     

Consumption of heavy metal contaminated foods and associated risks in Bangladesh

This study investigated the magnitude of heavy metal contamination and determined the carcinogenic as well as non-carcinogenic risks associated with selected food consumption in Bangladesh. Commonly consumed varieties of rice, vegetables, and fish samples were analyzed to measure the concentrations of heavy metals such as cadmium, chromium, lead, arsenic, manganese, nickel, and zinc. These staple food items showed the greatest probabilities of heavy metal contamination in different phases of their production and marketing. Wide variations of metal concentrations were observed. Specifically, estimated daily intakes of arsenic and cadmium exceeded allowable daily intakes in all three food items. Toxicity scores of the metals were evaluated, and a comprehensive risk assessment was conducted to quantify the risks associated with the daily food consumption. Except for cadmium and lead in vegetables, all the contaminants present in each food item posed significant levels of carcinogenic risks up to 2.99?×?10^?3 compared to the EPA recommended carcinogenic risk level of 1.0?×?10^?6. Cadmium and arsenic intake due to rice consumption also posed unsafe levels of non-carcinogenic risks of 4.587 and 6.648, respectively, compared to the EPA recommended non-carcinogenic risk level of 1.0. Finally, a revised set of permissible limits was proposed for the heavy metals detected in the food items. Those permissible limits would ensure the risks associated with food consumption below the allowable carcinogenic and non-carcinogenic risk levels. Thus, this comprehensive approach would provide guidelines to formulate adequate control measures and regulatory limits of toxic metals in foods produced and marketed in Bangladesh.     

Identification of rainfall homogenous regions in Saudi Arabia for experimenting and improving trend detection techniques

Environmental Science and Pollution Research - In Saudi Arabia, identifying homogenous zones based on rainfall patterns is critical for ensuring a predictable and stable water resource and...     

Polybrominated diphenyl ethers (PBDEs) in soils along a rural-urban-rural transect: sources, concentration gradients, and profiles

This study reports concentrations of PBDEs in surface soil samples collected along a 140 km transect across Kuwait to assess the role of urban centers as sources of persistent organic pollutants to the surrounding environment. The ΣPBDE concentrations varied by a factor of ∼250 and ranged from 289 to 80,078 pg g⁻¹ d.w. The concentrations of PBDEs in Kuwait City were significantly higher (p < 0.01) than those collected from sites outside the city supporting the hypothesis that urban centers are sources of PBDEs. The congener profiles were dominated by BDE-209, accounting for 93% of the PBDEs in the soil samples. The concentrations of all congeners (except BDE-209) were highly correlated with percent organic carbon (%OC) (p > 0.05) when the data from Kuwait City was omitted from the analysis. These findings suggest that soil concentrations outside the urban centers were close to equilibrium with the atmosphere.     

Chloride and atrazine transport through saturated soil columns

A possible contamination of water resources by the application of pesticides is a problem confronting many irrigated areas in arid and semi-arid areas. The best management practices have to be adopted to minimize pesticide transport and leaching under irrigated conditions. Atrazine dissipation in loam and sandy loam soils has been tested in the laboratory using disturbed soil columns under saturated flooding conditions. All the experiments were performed in replicates. The chloride transport was also studied to test its behavior as an inert tracer in both the soils. Atrazine and chloride breakthrough curves were analyzed with the parameter optimization program CXTFIT to determine transport parameters including pore-water velocity (v), retardation coefficient (R), hydrodynamic dispersion coefficient (D), and pulse duration (t _o ). The pore-water velocity and pulse duration of the solute were estimated from the experimental conditions and kept constant during the optimization procedure. The results indicated that the R of chloride was not significantly different from 1, indicating that chloride is an inert tracer for the types of soil tested in this study. The average R of atrazine was 4.56 and 3.15 for sandy loam and loam soils, respectively. Results also showed that the hydrodynamic dispersion coefficient was much higher in the case of sandy loam soil compared to the loam soil for the two solutes, thus indicating non-equilibrium transport conditions. In the case of chloride, D increased from 0.4 for the loam soil to 16.2?cm²/min for the sandy loam soil. Similar results were observed in the case of atrazine in which D for the sandy loam soil was 60% higher than that for the loam soil. More atrazine leaching is expected under field conditions due to the presence of soil cracks and macropores.