Environmentally compatible energy resource production—consumption pattern (case study: Iran)

Like all rapidly developing countries, the government of Iran (GOI) has to integrate environment priorities into its energy sector. In order to integrate environmental concerns into energy sector, an Energy-Environment Review (EER) may be considered as the mainstreaming tool capable of examining the interface between energy and the environment. The results of the EER should be interpreted, in the light of the objective of the 4th Five Year Development Plan in Iran, to achieve fast and sustainable growth and accelerate the transition to a market economy. In particular, the suggested actions will promote economic efficiency use of energy resources through a proper allocation of scarce resources, including environmental resources, so as to achieve economic efficiency and environmental and social protection. This paper comprises: (A) an analysis of the current situation with regards to energy production and consumption; (B) an evaluation of the growth prospects with regard to energy production and consumption; (C) the identification of environmental issues induced by the generation and use of energy and estimation of the associated costs of damages; (D) the evaluation of the extent of contribution to the climate-change phenomenon through emission of greenhouse gases; (E) the evaluation of the proposed mitigation measures for the previously identified environmental problems; and (F) conclusions and recommendations. The EER-Iran assessed the total health damage from air pollution in 2001 at about 56  ×  10¹² Rials (US $ seven billion); equivalent to 8.4% of nominal GDP. In the absence of the price reform and control policies, the EER-Iran estimated that the damage in Iran in the money of 2001, will grow to 155  ×  10¹² Rials (US $ nine billion) by 2019. This is equivalent to 10.9% of nominal GDP, i.e., a large percentage of a larger GDP. Of this total, 107  ×  10¹² Rials (US $ 8.4 billion) come from transport sector. The damage cost to the global environment from the flaring of natural gas, assessed on the basis of a carbon price of US $ 10/ton CO₂, is found to be approximately US $ 600 million per year. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

An expert-based approach to forest road network planning by combining Delphi and spatial multi-criteria evaluation

Changes in forest landscapes resulting from road construction have increased remarkably in the last few years. On the other hand, the sustainable management of forest resources can only be achieved through a well-organized road network. In order to minimize the environmental impacts of forest roads, forest road managers must design the road network efficiently and environmentally as well. Efficient planning methodologies can assist forest road managers in considering the technical, economic, and environmental factors that affect forest road planning. This paper describes a three-stage methodology using the Delphi method for selecting the important criteria, the Analytic Hierarchy Process for obtaining the relative importance of the criteria, and finally, a spatial multi-criteria evaluation in a geographic information system (GIS) environment for identifying the lowest-impact road network alternative. Results of the Delphi method revealed that ground slope, lithology, distance from stream network, distance from faults, landslide susceptibility, erosion susceptibility, geology, and soil texture are the most important criteria for forest road planning in the study area. The suitability map for road planning was then obtained by combining the fuzzy map layers of these criteria with respect to their weights. Nine road network alternatives were designed using PEGGER, an ArcView GIS extension, and finally, their values were extracted from the suitability map. Results showed that the methodology was useful for identifying road that met environmental and cost considerations. Based on this work, we suggest future work in forest road planning using multi-criteria evaluation and decision making be considered in other regions and that the road planning criteria identified in this study may be useful.     

Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites

The objective of this work was to improve the impact and thermal properties of polylactic acid (PLA)-based biocomposite by appropriate application of cellulosic fiber and a bioelastomer. Biocomposites formulations with fiber contents of up to 20% in combination with a bioelastomer were extrusion-compounded in a twin-screw extruder followed by molding in an injection molding system. Fibers used in the formulations included three types of cellulosic fiber; namely, raw fiber from oat hull biomass (RF), hydrolysis byproduct (ATF) which was the solid fraction obtained from an acid-catalyzed hydrolysis of RF, and delignified fibers (AD30, AD65, AD100) which were the products of delignification of ATF. Formulated biocomposites were characterized for thermal (glass transition and melting temperatures, and enthalpy of melting) and physico-mechanical (tensile and bending strengths, stiffness, impact energy, and water absorption) properties. Among all types of biofibers, RF resulted in poor properties in the biocomposites due to the high hemicellulose content in the structure. On the other hand, the ratio of lignin to cellulose (in the absence of hemicellulose) in the modified fibers did not significantly affect the physico-mechanical and thermal properties of the biocomposites. The elastomer applied in the formulations improved the impact energy, thermal properties, and elongation at break of the composites. However, it adversely affected the strength and water resistance of biocomposites, especially in the presence of hemicellulose. The results indicated that, depending on the application, a wide range of PLA green composites with different physico-mechanical properties can be achieved.     

Temporal variation in leachate composition of a newly constructed landfill site in Lahore in context to environmental pollution and risks

Environmental Science and Pollution Research - This study investigated the seasonal and temporal variations in the extent and source of physiochemical and toxic trace elements in the Lakhodair...     

Exposure assessment and associated lung deposition calculations for vehicular exhaust in four metropolitan cities of Pakistan

Ambient aerosol concentrations along the roadside of metropolitan cities of Pakistan were measured using a Grimm 1.109 dust monitor. Considering the high ambient aerosol concentrations, regional lung deposition of aerosol particles in the human respiratory tract was calculated to assess extent of exposure. Lung deposition was computed in terms of mass concentration and the associated surface area for 12 male traffic wardens using the latest version of the stochastic lung deposition code Inhalation, Deposition, and Exhalation of Aerosols in the Lung. The results have revealed 4 to 10 times higher concentrations than recommended by WHO guidelines. The deposition results derived from the model disclose that extrathoracic deposition is in the range of 22 to 28 % with total lung deposition ranging from 40 to 44 % for the scanned particle window of 0.25–10 μm. Considering an average 8-h shift per day and an average breathing rate of 1.3 m³?h^?1, it is approximated that in a worker, up to 1.6 mg of inhalable particle mass can deposit per day.     

Two-site kinetic modeling of bacteriophages transport through columns of saturated dune sand

Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174.     

The detection of SARS-CoV-2 RNA in indoor air of dental clinics during the COVID-19 pandemic

Environmental Science and Pollution Research - In the indoor environment of dental clinics, dental personnel and patients are exposed to a risk of infection because of the transmission of...     

Introduction of Ionic Liquids as Highly Efficient Plasticizers and Flame Retardants of Cellulose Triacetate Films

Journal of Polymers and the Environment - As a promising biodegradable polymer, cellulose triacetate (CTA) was synthesized and plasticized with ionic liquids to produce flexible biocomposite films...     

Photocatalysis: an effective tool for photodegradation of dyes—a review

Environmental Science and Pollution Research - The disposal of dye-contaminated wastewater is a major concern around the world for which a variety of techniques are used for its treatment. The...     

Application of magnetic field and iron in order to change medicinal products of <Emphasis Type="Italic">Ocimum basilicum</Emphasis>

In the present research, the effects of static magnetic field, with or without iron on the growth, the activity of certain enzymes (like polyphenol oxidase and phenyle alanine ammonialyase), the content of phenolic compounds and the essential oil composition of sweet basil (Ocimum basilicum) were studied. Treatment of plants with static magnetic field with or without iron led to decrease of the growth of plants as well as decrease in the activity of phenyle alanine ammonialyase and of phenolic compounds content. In addition in those plants exposed to magnetic field the amount of essential oils, notably of methyl chavicol, was increased. Exposure of plants to the magnetic field decreased the activity of polyphenol oxidase, whereas treatment of plants with iron when exposed to magnetic field increased polyphenol oxidase activity. In this group the content of essential oil was reduced.