Drivers for innovation in waste-to-energy technology.

This paper summarizes developments made in the field of waste-to-energy technology between the 1980s and the present. In the USA, many waste-to-energy systems were developed in the 1980s and early 1990s. These plants generated power relatively efficiently (typically 23%) in 60 bar/ 443 degrees C boilers. Unfortunately, the development came to a stop when the US Supreme Court rejected the practice of waste flow control in 1994. Consequently, waste was directed to mega-landfills, associated with very negative environmental impacts. However, given landfill taxes and increased fuel prices, new waste-to-energy projects have recently been developed. Attractive premiums for renewable power production from municipal waste have been introduced in several European countries. This triggered important innovations in the field of improved energy recovery. Examples of modern waste-to-energy plants are Brescia and Amsterdam with net efficiencies of 24 and 30%, respectively. Incineration is traditionally preferred in Japan due to space constraints. New legislation promoted ash melting or gasification to obtain improved ash quality. However, these processes reduce the efficiency in terms of energy, cost and availability. A new oxygen-enriched waste-to-energy system is under development in order to better achieve the required inert ash quality.     

Review of in situ remediation technologies for lead,zinc, and cadmium in soil

This article presents a review of in situ technologies for the remediation of soils contaminated with lead, zinc, and/or cadmium. The objective of this review is to assess the developmental status of the available in situ technologies and provide a general summary of typical applications and limitations of these technologies. The literature review identified seven in situ remediation technologies—solidification/stabilization, vitrification, electrokinetic remediation, soil flushing, phytoextraction, phytostabilization, and chemical stabilization. These technologies were considered for their ability to meet a specific set of remediation objectives under a range of conditions. Each of these technologies has both strengths and weaknesses for addressing particular remedial situations discussed in the article for each of the technologies. A general summary of which technologies are most applicable to common remedial scenarios is also provided. © 2004 Wiley Periodicals, Inc.     

Polycyclic aromatic hydrocarbons (PAHs) in soils of the Moscow Region--concentrations, temporal trends, and small-scale distribution

The knowledge of the environmental fate of polycyclic aromatic hydrocarbons (PAHs) is restricted to few climatic regions of the world almost excluding the Taiga. Our objectives were to (i) separate anthropogenic from background contributions to PAH concentrations and (ii) determine temporal trends in PAH concentrations during the last century including the change in distribution of PAHs in interior and exterior portions of aggregates in soils of the Moscow region. Along a southeast-bound transect from Moscow (windward in winter) and at a background location northeast of Moscow (leeward in winter), seven topsoil samples were collected in 1910-1954 and 35 in 1998-2003. We fractionated the soils in interior and exterior portions of aggregates > 10 mm and remaining soil without aggregates. The sum of 21 PAHs (sigma21PAHs) concentrations in recent bulk soil ranged from 59 to 1350 ng g(-1). The concentrations of all PAHs were lower outside than in Moscow. The range of the concentrations of the sigma21PAHs in archived soil samples (159-1280 ng g(-1)) was similar as in recent soils. In most recent and archived samples, naphthalene and phenanthrene, were most abundant. The concentrations of low-molecular-weight PAHs decreased during the last century at most sites; those of high-molecular-weight compounds increased. The sigma21PAHs concentrations were accumulated in the exterior of aggregates (109%) and depleted in the interior (95%) relative to the concentration in bulk soil (defined as 100%), which was similar to that in the soil without aggregates (99%). The differences between aggregate interior and exterior did not change during the last century. The dominance of naphthalene and phenanthrene is typical of remote regions. The urban influence on PAH concentrations in the last century was small.     

Socio-demographic determinants of municipal waste generation: case study of the Czech Republic

Journal of Material Cycles and Waste Management - Increasing pressure of the European Union on diverting municipal waste from landfills requires an active role of households and commands a radical...     

Future energy: in search of a scenario reflecting current and future pressures and trends

Environmental Economics and Policy Studies - Growing societal pressures, technological trends and government and industry actions are moving the world toward decarbonization and away from the...     

Mitigation of greenhouse gas emissions from an abandoned Baltic peat extraction area by growing reed canary grass: life-cycle assessment

Abandoned peat extraction areas are continuous emitters of GHGs; hence, abandonment of peat extraction areas should immediately be followed by conversion to an appropriate after-use. Our primary aim was to clarify the atmospheric impact of reed canary grass (RCG, Phalaris arundinacea L.) cultivation on an abandoned peat extraction area and to compare it to other after-treatment alternatives. We performed a life-cycle assessment for five different after-use options for a drained organic soil withdrawn from peat extraction: (I) bare peat soil (no management), (II) non-fertilised Phalaris cultivation, (III) fertilised Phalaris cultivation, (IV) afforestation, and (V) rewetting. Our results showed that on average the non-fertilised and fertilised Phalaris alternatives had a cooling effect on the atmosphere (?10,837 and ?477 kg CO₂-eq ha^?1 year^?1, respectively), whereas afforestation, rewetting, and no-management alternatives contributed to global warming (9,511, 8,195, and 2,529 kg CO₂-eq ha^?1 year^?1, respectively). The main components influencing the global warming potential of different after-use alternatives were site GHG emissions, carbon assimilation by plants, and emissions from combustion, while management-related emissions played a relatively minor role. The results of this study indicate that, from the perspective of atmospheric impact, the most suitable after-use option for an abandoned peat extraction area is cultivation of RCG.     

Arsenic geochemistry and health

Arsenic occurs naturally in the earth's crust and is widely distributed in the environment. Natural mineralization and activities of microorganisms enhance arsenic mobilization in the environment but human intervention has exacerbated arsenic contamination. Although arsenic is useful for industrial, agricultural, medicinal and other purposes, it exerts a toxic effect in a variety of organisms, including humans. Arsenic exposure may not only affect and disable organs of the body, especially the skin, but may also interfere with the proper functioning of the immune system. This paper, therefore, generally highlights the toxic effects of arsenic as well as its mobilization in the natural environment and possible controls. It also briefly attempts to outline the impact of arsenic on the immune system, whose alteration could lead to viral/bacterial infections.     

Development and performance of the vehicle-mounted radiation monitoring equipment used in the Maralinga rehabilitation project

The rehabilitation of the former nuclear test site at Maralinga involved (among other processes) the removal of contaminated soil from an area of approximately 2.5 km2. The two most stringent rehabilitation criteria required measurements to ensure that no radioactive particle exceeding 100 kBq of 241Am activity, and no area of 1 ha exceeding 3 kBq/m2 of 241Am activity, remained in the rehabilitated area. The project timetable required that the area be scanned at the rate of approximately 3 ha/day. Two vehicle-mounted detection systems were developed and constructed to obtain the necessary measurements in the available timeframe. The scientific basis for the designs are presented, together with details of the selected equipment and technical solutions found. The performance of this equipment in the field is discussed in terms of both its scientific and technical operation. Based on the experience gained at Maralinga, improved versions of this equipment were produced under contract for the People's Republic of China.