Wood Plastic Composite Panels: Influence of the Species,Formulation Variables and Blending Process on the Density and Withdrawal Strength of Fasteners

In this work, the influence of four variable parameters including fiber types (poplar and rice straw), fiber contents (45, 60, and 75 wt%), fiber sizes (20–40 and 40–60 mesh), and blending methods (hot-pressing and extrusion) on the physico-mechanical properties of wood plastic composite panels were studied. Generally, the results showed that each of the above-mentioned parameters had significant effect on the nail and screw withdrawal strength (pull-out load) and density, whereas their interactions did not have highly impressive effects on the properties. All tested properties vary significantly with fiber origin. Composites filled with larger fiber size, produced panels with higher withdrawal strength and density. The effect of blending method on density was maximal. Withdrawal strength values of each sample decreased with increase in fiber loading. The lowest withdrawal strength values of nail and screw were obtained from the samples filled with rice straw. It was found that strength properties of the composites can be improved moderately by adding 45 wt% fiber, 20–40 mesh particle and poplar flour. According to the results, the blending method is a significant variable in the determination of withdrawal strength. Therefore, the blending method can be recommended based on the end product applications.     

Photochemical Degradation of Aqueous Polyvinyl Alcohol in a Continuous UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> Process: Experimental and Statistical Analysis

Polyvinyl alcohol (PVA), being a dominant contributor of total organic carbon (TOC) in textile wastewater, is not easily degradable by conventional methods of wastewater treatment. This study investigates the degradation of aqueous PVA in a continuous UV/H₂O₂ photoreactor since the feeding strategy of hydrogen peroxide proves to have considerable effects on the process performance. Response surface methodology involving the Box–Behnken method is adopted for the experimental design to study the effects of operating parameters on the process performance. Experimental analysis shows that the TOC removal varies from 16.11 to 42.70 % along with a reduction of the PVA molecular weights from 56.7 to 95.3 %. The TOC removal is significantly lower than the molecular weight reduction due to the generation of the intermediate products during oxidation. Operating the UV/H₂O₂ process in a continuous mode facilitates the degradation of highly concentrated polymeric solutions using a relatively small hydrogen peroxide concentration in the feed with a small residence time ranges from 6.13 to 18.4 min.     

Identification and Model Predictive Control (MPC) of Aqueous Polyvinyl Alcohol Degradation in UV/H2O2 Photochemical Reactors

Journal of Polymers and the Environment - The performance of two continuous UV/H2O2 photoreactors in series under unsteady-state condition is studied. An input–output dynamic model is...     

Mechanical and Physical Properties of Green Biocomposite Based on Medium Density Fiberboard Sanding Powder/Polyethylene/Nanoclay

Medium density fiberboard (MDF) sanding powder is an industrial waste that has not been yet used as a raw material to produce composites. In this study, the influence of nanoclay particles on the flexural and impact strengths and the withdrawal strength of green biocomposites (based on MDF sanding powder/polyethylene/nanoclay) were investigated. For this aim, medium density fiberboard sanding dust and polyethylene were used as the lignocellulosic and thermoplastic material, respectively. In addition, maleic anhydride grafted polyethylene was used in three weight percentages (0, 3 and 6 %) as a coupling agent and compatibilizer, and Cloisite^®15A was used in four weight percentages (0, 2, 4 and 6 %). To prepare samples, wood-plastic granules were produced by using a twin-screw extruder followed by the hot pressing method. The mechanical and physical properties were measured according to the CEN/TS15534:2007 and ASTM-D256 technical specifications. The results showed that the coupling agent improved the mechanical and physical properties of biocomposites; however, its effect might be affected by the nanoclay particles. Furthermore, the ultrastructure of the biocomposites was surveyed with SEM.     

Photocatalytic degradation of aqueous Methyl Orange using nitrogen-doped TiO2 photocatalyst prepared by novel method of ultraviolet-assisted thermal synthesis

A nitrogen-doped titanium dioxide composite photocatalyst(N–TiO_2) with heterojunction structures is synthesized by three different approaches: a novel UV-assisted thermal synthesis, annealing, and microwave technique. Photocatalytic activities of synthesized photocatalysts are evaluated by the degradation of Methyl Orange under ultraviolet light types A(UV-A), B(UV-B), and C(UV-C), visible light, and direct sunlight irradiation. Results show that by using N–TiO_2 photocatalyst prepared by the UV-assisted thermal synthesis and annealing, the degradation increases by 16.5% and 20.4%, respectively, compared to that by bare TiO_2. The best results are obtained at a nitrogen to TiO_2 mass ratio of 0.15(N:TiO_2). The enhancement of the photocatalytic activity observed in the visible range is mainly attributed to the increasing separation rate of photogenerated charge carriers. The novel UV-assisted thermal synthesis has produced encouraging results as a preparation method for the nitrogen-doped TiO_2 photocatalyst; thus, further studies are recommended for process optimization, immobilization, and scale-up to evaluate its applicability in wastewater treatment.     

Photochemical Kinetic Modeling of Degradation of Aqueous Polyvinyl Alcohol in a UV/H<Subscript>2</Subscript>O<Subscript>2</Subscript> Photoreactor

This study presents a photochemical kinetics model to describe the degradation of water-soluble PVA (Polyvinyl Alcohol) polymer in a UV/H₂O₂ batch reactor. Under the effect of UV light, the photolysis of hydrogen peroxide into hydroxyl radicals can generate a series of polymer scission reactions. For a better understanding and analysis of the UV/H₂O₂ process in the cracking of the PVA macromolecules, a chemical reaction mechanism of the degradation process and a relevant photochemical kinetics model are developed to describe the disintegration of the polymer chains. Taking into account the probabilistic fragmentation of the polymer, the statistical moment approach is used to model the molar population balance of live and dead polymer chains. The model predicts the PVA molecular weight reduction, the acidity of the solution, and hydrogen peroxide residual. In addition to previously published data collected in this laboratory, a new set of experiments were conducted using a 500 mg/L PVA aqueous for different hydrogen peroxide/PVA ratios for model validation. Measurements of average molecular weights of the polymer, hydrogen peroxide concentrations and pH of the PVA solution were determinant factors in constructing a reliable photochemical model of the UV/H₂O₂ process. Experimental data showed a decrease in the PVA molecular weight and a buildup of the solution acidity. The experimental data also served to determine the kinetics rate constants of the PVA photochemical degradation and validate the model whose predictions are in good agreement with data. The model can provide a comprehensive understanding of the impact of the design and operational variables.     

Cleaner production of polyurethane (PU) foams through use of hydrodesulfurization (HDS) spent catalyst

Environmental Science and Pollution Research - Due to the increased population in the urbanized areas, considerable attention is being paid on the development of energy-efficient buildings. In...